ആമുഖം
The Behringer UltraBass BXD3000H is an ultra-compact 300-Watt 2-channel bass amplifier head designed for powerful and versatile bass amplification. It features revolutionary Class-D amplifier technology, delivering enormous power and incredible sonic performance in a lightweight package. This manual provides essential information for setting up, operating, and maintaining your BXD3000H.
പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- ഈ നിർദ്ദേശങ്ങൾ വായിക്കുക.
- ഈ നിർദ്ദേശങ്ങൾ സൂക്ഷിക്കുക.
- എല്ലാ മുന്നറിയിപ്പുകളും ശ്രദ്ധിക്കുക.
- എല്ലാ നിർദ്ദേശങ്ങളും പാലിക്കുക.
- വെള്ളത്തിനടുത്ത് ഈ ഉപകരണം ഉപയോഗിക്കരുത്.
- ഉണങ്ങിയ തുണി ഉപയോഗിച്ച് മാത്രം വൃത്തിയാക്കുക.
- വെൻ്റിലേഷൻ ഓപ്പണിംഗുകളൊന്നും തടയരുത്. നിർമ്മാതാവിൻ്റെ നിർദ്ദേശങ്ങൾക്കനുസൃതമായി ഇൻസ്റ്റാൾ ചെയ്യുക.
- റേഡിയറുകൾ, ഹീറ്റ് രജിസ്റ്ററുകൾ, സ്റ്റൗകൾ, അല്ലെങ്കിൽ മറ്റ് ഉപകരണങ്ങൾ (ഉൾപ്പെടെ) പോലെയുള്ള താപ സ്രോതസ്സുകൾക്ക് സമീപം ഇൻസ്റ്റാൾ ചെയ്യരുത്. ampലൈഫയറുകൾ) ചൂട് ഉത്പാദിപ്പിക്കുന്നത്.
- പോളറൈസ്ഡ് അല്ലെങ്കിൽ ഗ്രൗണ്ടിംഗ്-ടൈപ്പ് പ്ലഗിൻ്റെ സുരക്ഷാ ഉദ്ദേശ്യത്തെ പരാജയപ്പെടുത്തരുത്. ധ്രുവീകരിക്കപ്പെട്ട പ്ലഗിന് രണ്ട് ബ്ലേഡുകൾ ഉണ്ട്, ഒന്ന് മറ്റൊന്നിനേക്കാൾ വീതിയുള്ളതാണ്. ഒരു ഗ്രൗണ്ടിംഗ് ടൈപ്പ് പ്ലഗിന് രണ്ട് ബ്ലേഡുകളും മൂന്നാമത്തെ ഗ്രൗണ്ടിംഗ് പ്രോംഗും ഉണ്ട്. നിങ്ങളുടെ സുരക്ഷയ്ക്കായി വിശാലമായ ബ്ലേഡ് അല്ലെങ്കിൽ മൂന്നാമത്തെ പ്രോംഗ് നൽകിയിരിക്കുന്നു. നൽകിയിരിക്കുന്ന പ്ലഗ് നിങ്ങളുടെ ഔട്ട്ലെറ്റിലേക്ക് യോജിക്കുന്നില്ലെങ്കിൽ, കാലഹരണപ്പെട്ട ഔട്ട്ലെറ്റ് മാറ്റിസ്ഥാപിക്കുന്നതിന് ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുക.
- പ്രത്യേകിച്ച് പ്ലഗുകൾ, കൺവീനിയൻസ് റിസപ്റ്റക്കിളുകൾ, ഉപകരണത്തിൽ നിന്ന് പുറത്തുകടക്കുന്ന പോയിൻ്റ് എന്നിവയിൽ നടക്കുകയോ പിഞ്ച് ചെയ്യുകയോ ചെയ്യുന്നതിൽ നിന്ന് പവർ കോർഡ് സംരക്ഷിക്കുക.
- നിർമ്മാതാവ് വ്യക്തമാക്കിയ അറ്റാച്ച്മെൻ്റുകൾ/ആക്സസറികൾ മാത്രം ഉപയോഗിക്കുക.
- നിർമ്മാതാവ് വ്യക്തമാക്കിയ കാർട്ട്, സ്റ്റാൻഡ്, ട്രൈപോഡ്, ബ്രാക്കറ്റ് അല്ലെങ്കിൽ ടേബിൾ എന്നിവയ്ക്കൊപ്പം മാത്രം ഉപയോഗിക്കുക, അല്ലെങ്കിൽ ഉപകരണം ഉപയോഗിച്ച് വിൽക്കുക. ഒരു കാർട്ട് ഉപയോഗിക്കുമ്പോൾ, ടിപ്പ്-ഓവറിൽ നിന്നുള്ള പരിക്ക് ഒഴിവാക്കാൻ വണ്ടി/ഉപകരണ കോമ്പിനേഷൻ നീക്കുമ്പോൾ ജാഗ്രത പാലിക്കുക.
- മിന്നൽ കൊടുങ്കാറ്റുകളുടെ സമയത്തോ ദീർഘനേരം ഉപയോഗിക്കാത്ത സമയത്തോ ഈ ഉപകരണം അൺപ്ലഗ് ചെയ്യുക.
- എല്ലാ സേവനങ്ങളും യോഗ്യതയുള്ള സേവന ഉദ്യോഗസ്ഥർക്ക് റഫർ ചെയ്യുക. പവർ സപ്ലൈ കോർഡ് അല്ലെങ്കിൽ പ്ലഗ് കേടാകുക, ദ്രാവകം ഒഴുകുകയോ ഉപകരണങ്ങൾ ഉപകരണത്തിലേക്ക് വീഴുകയോ ചെയ്യുക, ഉപകരണം മഴയോ ഈർപ്പമോ സമ്പർക്കം പുലർത്തുക, സാധാരണയായി പ്രവർത്തിക്കാത്തത് എന്നിങ്ങനെയുള്ള ഏതെങ്കിലും വിധത്തിൽ ഉപകരണത്തിന് കേടുപാടുകൾ സംഭവിക്കുമ്പോൾ സേവനം ആവശ്യമാണ്. , അല്ലെങ്കിൽ ഉപേക്ഷിച്ചു.
ഫീച്ചറുകൾ
- വിപ്ലവ ക്ലാസ്-ഡി amplifier technology: enormous power, incredible sonic performance and ultra-lightweight.
- Clean channel with dedicated gain control.
- Distortion channel with dedicated gain, shape and level controls.
- Switchable Ultrabass subharmonics processor for incredible low-end power.
- Integrated compressor for smooth out volume peaks and deliver punchy bass.
- Ultra-musical 7-band graphic EQ with FBQ Spectrum Analyzer for instant sound shaping.
- Dedicated headphone output for silent practice.
- Balanced XLR DI output for direct connection to a mixing console.
- FX Insert for external effects devices.
- Dual footswitch for channel selection and Ultrabass function included.
സജ്ജമാക്കുക
Before powering on your BXD3000H, ensure all connections are secure and correct. This section guides you through the initial setup process.
ശക്തിയിലേക്ക് ബന്ധിപ്പിക്കുന്നു
Connect the supplied power cord to the AC input on the rear panel of the amplifier and then to a suitable wall outlet. Ensure the power switch on the front panel is in the OFF position before connecting to power.
Connecting Your Instrument
Plug your bass guitar or other compatible instrument into the ഇൻപുട്ട് jack on the front panel using a standard 1/4-inch instrument cable. The BXD3000H is compatible with various bass types, including double bass, via its XLR connector type.
Connecting to a Speaker Cabinet
ബന്ധിപ്പിക്കുക amplifier's speaker output to your bass speaker cabinet using a high-quality speaker cable. Ensure the impedance of your speaker cabinet matches the amplifier's output requirements. Refer to your speaker cabinet's manual for impedance information.
ഫുട്സ്വിച്ച് കണക്ഷൻ
Connect the included dual footswitch to the dedicated footswitch input on the rear panel. This allows for convenient switching between channels and activating the Ultrabass function during performance.

Figure 1: Front Panel Layout of the BXD3000H. This image displays the input, gain controls, equalizer, compressor, Ultrabass, master volume, and headphone jack.

ചിത്രം 2: കോണാകൃതിയിലുള്ളത് View of the BXD3000H. This image provides a perspective view യുടെ ampലിഫയർ, ഷോക്asing its overall design and compact form factor.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The BXD3000H offers a range of controls to shape your bass tone. Familiarize yourself with each control to achieve your desired sound.
പവർ ചെയ്യുന്നത് ഓൺ/ഓഫ്
- To power on, ensure all volume controls are set to minimum, then press the പവർ ഓൺ സ്ഥാനത്തേക്ക് മാറുക.
- To power off, set all volume controls to minimum, then press the പവർ ഓഫ് സ്ഥാനത്തേക്ക് മാറുക.
ചാനൽ പ്രവർത്തനം
The BXD3000H features two distinct channels:
- ചാനൽ വൃത്തിയാക്കുക: ഉപയോഗിക്കുക ഗെയ്ൻ 1 control to adjust the input sensitivity for a clean, uncolored bass tone.
- Distortion Channel: Activate this channel for a powerful, overdriven bass sound. Use ഗെയ്ൻ 2 to control the amount of distortion, ആകൃതി to sculpt the mid-range character, and ലെവൽ to set the output volume of the distortion channel.
- Switch between channels using the dedicated button on the front panel or the included footswitch.
FBQ Equalizer
The 7-band graphic equalizer allows for precise tone shaping. Adjust the sliders to boost or cut specific frequencies (63 Hz, 160 Hz, 315 Hz, 630 Hz, 1.6 kHz, 2.5 kHz, 5 kHz). The FBQ Spectrum Analyzer function provides visual feedback on frequency content, helping you identify and eliminate feedback.
കംപ്രസ്സർ
The integrated compressor smooths out volume peaks and adds sustain to your bass notes. Adjust the കംപ്രസ്സർ നിങ്ങളുടെ സിഗ്നലിൽ പ്രയോഗിക്കുന്ന കംപ്രഷന്റെ അളവ് നിയന്ത്രിക്കുന്നതിനുള്ള നോബ്.
Ultrabass
ഇടപഴകുക അൾട്രാബാസ് function to add a subharmonics processor, generating an octave below your played notes for an incredibly deep and powerful low-end. Use the dedicated knob to blend the effect into your signal. This feature can also be toggled via the footswitch.
Master Volume and Headphones
- മാസ്റ്റർ: യുടെ മൊത്തത്തിലുള്ള ഔട്ട്പുട്ട് വോളിയം നിയന്ത്രിക്കുന്നു ampജീവൻ.
- ഫോണുകൾ: Connect headphones to this jack for silent practice. The headphone volume is independent of the master volume.
DI Output and FX Loop
- പുറത്തുകടക്കുക: The balanced XLR DI output allows for direct connection to a mixing console or recording interface, providing a clean signal for live sound or studio recording.
- FX ഇൻസേർട്ട്: Use the FX Insert jacks to connect external effects processors (e.g., pedals, rack units) into your signal chain.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and optimal performance of your BXD3000H.
- വൃത്തിയാക്കൽ: വിച്ഛേദിക്കുക amplifier from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners or solvents.
- വെൻ്റിലേഷൻ: വെന്റിലേഷൻ ദ്വാരങ്ങൾ അടഞ്ഞിട്ടില്ലെന്ന് ഉറപ്പാക്കുക. അമിതമായി ചൂടാകുന്നത് തടയാൻ മതിയായ വായുസഞ്ചാരം നിർണായകമാണ്.
- സംഭരണം: ദീർഘകാലത്തേക്ക് ഉപയോഗിക്കാത്തപ്പോൾ, സൂക്ഷിക്കുക ampനേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും കടുത്ത താപനിലയിൽ നിന്നും അകലെ, തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് ലിഫയർ വയ്ക്കുക.
- ഗതാഗതം: When transporting the unit, use appropriate protective cases to prevent physical damage.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your BXD3000H.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല. | Power not connected, master volume too low, speaker cable disconnected, instrument cable faulty, instrument volume off. | Check power connection, increase master volume, ensure speaker and instrument cables are securely connected and functional. Check instrument volume. |
| വികലമായ അല്ലെങ്കിൽ ദുർബലമായ ശബ്ദം. | Input gain too high/low, speaker impedance mismatch, faulty cables, damaged speaker. | Adjust input gain (GAIN 1/GAIN 2), ensure speaker impedance matches, try different cables, inspect speaker for damage. |
| Fan noise is noticeable. | Normal operation, restricted airflow. | A certain level of fan noise is normal for cooling. Ensure ventilation openings are clear and not obstructed. |
| Footswitch not working. | Footswitch cable disconnected or faulty, footswitch itself is damaged. | Ensure footswitch cable is securely connected. Test with another compatible footswitch if available. |
If the problem persists after attempting these solutions, please contact Behringer customer support or a qualified service technician.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | BXD3000H |
| ഔട്ട്പുട്ട് വാട്ട്tage | 300 വാട്ട്സ് |
| ഇനത്തിൻ്റെ ഭാരം | 7.7 പൗണ്ട് (ഏകദേശം 3.5 കിലോഗ്രാം) |
| ഉൽപ്പന്ന അളവുകൾ (D x W x H) | 8.86" x 17.72" x 4.61" (22.5 സെ.മീ x 45 സെ.മീ x 11.7 സെ.മീ) |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| കണക്റ്റർ തരം | XLR (for DI Out) |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Bass Guitar, Double Bass |
| ചാനലുകൾ | 2 (Clean, Distortion) |
| ഇക്വലൈസർ | 7-band graphic EQ with FBQ Spectrum Analyzer |
| പ്രത്യേക സവിശേഷതകൾ | Ultrabass subharmonics processor, Compressor, Headphone output, DI output, FX Insert |
വാറൻ്റിയും പിന്തുണയും
വിശദമായ വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക ബെഹ്രിംഗർ കാണുക. webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
ഓൺലൈൻ ഉറവിടങ്ങളും ബന്ധപ്പെടാനുള്ള വിവരങ്ങളും സാധാരണയായി ഇവിടെ കണ്ടെത്താനാകും www.behringer.com.





