ആമുഖം
The BEA 10EAGLE Pedestrian Motion Detector is designed for use with automatic doors, providing sophisticated motion tracking and precise activation zones. This device offers enhanced energy conservation features and multiple motion detection options to suit various operational requirements. This manual provides essential information for the proper installation, operation, and maintenance of your 10EAGLE motion detector.
സുരക്ഷാ വിവരങ്ങൾ
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the device. Keep this manual for future reference.
- ഏതെങ്കിലും ഇൻസ്റ്റാളേഷൻ, വയറിംഗ് അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിച്ഛേദിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- പ്രാദേശിക ഇലക്ട്രിക്കൽ കോഡുകളും ചട്ടങ്ങളും അനുസരിച്ച് യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥരാണ് ഇൻസ്റ്റാളേഷൻ നടത്തേണ്ടത്.
- അമിതമായ ഈർപ്പം അല്ലെങ്കിൽ അങ്ങേയറ്റത്തെ താപനിലയിലേക്ക് ഉപകരണം തുറന്നുകാട്ടരുത്.
- Use only specified power sources and wiring as detailed in the wiring instructions.
- Verify proper operation after installation and before regular use.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The BEA 10EAGLE is designed for wall mount installation. Proper setup is crucial for optimal performance and safety.
ചിത്രം 1: മുൻഭാഗം view of the BEA 10EAGLE Pedestrian Motion Detector. This image shows the compact, black housing with a red indicator light.
മൗണ്ടിംഗ്
The device is designed for wall mounting. Select a location that provides an unobstructed view of the detection area for automatic doors. Ensure the mounting surface is stable and capable of supporting the device's weight.
വയറിംഗ്
The 10EAGLE operates on a corded electric power source. Wiring connections are specific and may differ from other sensors. It is imperative to consult the detailed wiring instructions provided with the product packaging for correct connections. Incorrect wiring can lead to malfunction or damage. Pay close attention to the terminals for power input and signal output to the automatic door system.
Configuration and Adjustment
The 10EAGLE features extra immunity protection and allows for precise activation zone adjustments. Refer to the product's specific configuration guide for details on setting detection parameters, including sensitivity and detection field size. This ensures the sensor accurately detects pedestrians while minimizing false triggers.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The BEA 10EAGLE utilizes sophisticated motion tracking to detect pedestrian movement for automatic door activation. It can detect speeds as low as 2.2 inches per second, ensuring reliable operation even for slow-moving individuals.
Motion Detection Options
The device offers three primary motion detection options:
- ദ്വിദിശ: Detects movement in both directions (approaching and departing) within the detection zone.
- ഏകദിശാസൂചന: Configured to detect movement in a single direction, typically for entry or exit only.
- Uni-MTF (Motion Tracking Feature): A specialized uni-directional mode that enhances energy conservation by optimizing detection based on the direction of travel.
The selected detection option should align with the specific traffic flow requirements of the automatic door system. Refer to the product's advanced settings guide for instructions on switching between these modes.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and reliable performance of your BEA 10EAGLE motion detector.
- വൃത്തിയാക്കൽ: Periodically clean the sensor's lens and housing with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the surface.
- പരിശോധന: Annually inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the mounting is secure.
- പ്രവർത്തനക്ഷമത പരിശോധന: Regularly test the sensor's detection capabilities by walking through its activation zone to ensure the automatic door responds correctly.
If any issues are observed during maintenance, refer to the Troubleshooting section or contact support.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with the BEA 10EAGLE motion detector.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Door does not activate when approached. |
|
|
| Door activates without presence of a person (false trigger). |
|
|
| Sensor indicator light is off or blinking abnormally. |
|
|
For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact BEA Incorporated technical support.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ബിഎ |
| മോഡൽ നമ്പർ | 10EAGLE |
| നിറം | കറുപ്പ് |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| ഇനത്തിൻ്റെ ഭാരം | 0.01 ഔൺസ് |
| പാക്കേജ് അളവുകൾ | 6.14 x 4.45 x 3.35 ഇഞ്ച് |
| ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾ | Walkway, Automatic Doors |
| കണ്ടെത്തൽ വേഗത | As low as 2.2 inches per second |
| Motion Detection Options | Bi-directional, Uni-directional, Uni-MTF |
വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official BEA Incorporated website. For technical assistance, troubleshooting beyond this manual, or replacement parts, please contact BEA Incorporated customer support directly.
നിർമ്മാതാവ്: BEA Incorporated
