Laica BM2005W

Laica BM2005W Automatic Arm Blood Pressure Monitor

ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential instructions for the safe and effective use of your Laica BM2005W Automatic Arm Blood Pressure Monitor. Please read this manual thoroughly before using the device and keep it for future reference. This device is designed for non-invasive measurement and monitoring of arterial blood pressure and heart rate in adults.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Laica BM2005W is an automatic arm blood pressure monitor utilizing oscillometric technology for accurate and reliable measurements. It features a large LCD display and stores up to 120 measurements.

Laica BM2005W Blood Pressure Monitor with arm cuff and display

Figure 1: Laica BM2005W Automatic Arm Blood Pressure Monitor. This image shows the main unit with its large LCD display, control buttons, and the attached arm cuff.

ഘടകങ്ങൾ:

4. സജ്ജീകരണം

4.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. പ്രധാന യൂണിറ്റിന്റെ പിൻഭാഗത്തുള്ള ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. Insert four (4) AA alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

4.2. കഫ് അറ്റാച്ച്മെന്റ്

  1. Connect the air tube from the arm cuff to the air jack on the side of the main unit. Ensure a secure connection.
  2. The cuff should fit comfortably around your upper arm. Refer to the cuff size guide if available.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1. അളവെടുപ്പിനായി തയ്യാറെടുക്കുന്നു

5.2. ഒരു അളവ് എടുക്കൽ

  1. Press the "START/STOP" button to turn on the device. The display will show all symbols briefly, then "00".
  2. The cuff will automatically inflate. Remain still and silent during inflation and measurement.
  3. Once the measurement is complete, the cuff will deflate, and your systolic pressure, diastolic pressure, and pulse rate will be displayed on the LCD screen.
  4. Press the "START/STOP" button again to turn off the device, or it will automatically shut off after approximately one minute of inactivity.

5.3. മെമ്മറി പ്രവർത്തനം

The device stores up to 120 measurements. To view past readings:

  1. With the device off, press the "MEM" button.
  2. The most recent measurement will be displayed first.
  3. Press the "MEM" button repeatedly to scroll through older measurements.
  4. To exit memory mode, press the "START/STOP" button or wait for automatic shut-off.

6. പരിപാലനം

6.1. വൃത്തിയാക്കൽ

6.2. സംഭരണം

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഉപകരണം ഓണാക്കില്ല.ബാറ്ററികൾ തീർന്നിരിക്കുന്നു അല്ലെങ്കിൽ തെറ്റായി ചേർത്തിരിക്കുന്നു.ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക അല്ലെങ്കിൽ പോളാരിറ്റി പരിശോധിക്കുക.
Error message (e.g., "Err").Cuff not properly applied, movement during measurement, or air leakage.Re-apply cuff, remain still, check cuff connection. Try again after a few minutes.
പൊരുത്തമില്ലാത്ത വായനകൾ.Improper measurement technique, stress, or environmental factors.Ensure proper preparation and technique (refer to Section 5.1). Take multiple readings over time.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Laica website. For technical support or service inquiries, please contact Laica customer service through their official channels.

Note: Specific warranty details may vary by region and retailer. Keep your proof of purchase.