ആമുഖം
This manual provides essential information for the proper use and installation of the Estes Launch Lug Pack. These components are designed to ensure vertical stability for model rockets during liftoff when used with compatible launch pad rods.
സുരക്ഷാ വിവരങ്ങൾ
WARNING: This product is not a toy. Recommended for ages 14 and older.
Always follow all safety guidelines provided with your model rocket kit and launch system. Ensure proper adult supervision for users under 18 years of age.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Estes Launch Lug Pack (Model 302320) contains a variety of launch lugs designed for different model rocket sizes. These lugs are small, hollow tubes that slide over a launch rod, guiding the rocket during the initial phase of flight.
Figure 1: Contents of the Estes Launch Lug Pack. The image displays multiple white plastic tubes of different diameters, which are the launch lugs.
പായ്ക്ക് ഉൾപ്പെടുന്നു:
- Eight (8) launch lugs with 1/8-inch diameter.
- Four (4) launch lugs with 3/16-inch diameter.
- Two (2) launch lugs with 1/4-inch diameter.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- Select Appropriate Lug Size: Choose a launch lug that matches the diameter of your launch rod. The lug should slide freely over the rod without excessive play.
- സ്ഥാനം നിർണ്ണയിക്കുക: Launch lugs are typically attached to the rocket body tube. Most rocket kits provide specific locations for lug placement. Generally, two lugs are used: one near the top of the rocket and one near the bottom, ensuring stable guidance.
- അറ്റാച്ച്മെന്റ് രീതി:
- പശ: Apply a suitable model rocket adhesive (e.g., plastic cement, white glue, or epoxy) to the contact surface of the lug and the rocket body. Ensure a strong bond.
- Tape (Temporary/Light Models): For very light models or temporary setups, strong adhesive tape can be used to secure the lugs. However, adhesive is generally recommended for permanent attachment.
- ക്യൂറിംഗ് സമയം: Allow sufficient time for the adhesive to cure completely before handling or launching the rocket. Refer to the adhesive manufacturer's instructions for specific curing times.
- ടെസ്റ്റ് ഫിറ്റ്: Before final assembly, slide the chosen launch lug onto your launch rod to confirm a smooth fit.
പ്രവർത്തന തത്വങ്ങൾ
During a model rocket launch, the launch lugs serve as guides. The launch rod passes through the lugs, keeping the rocket aligned vertically until it achieves sufficient speed for its fins to provide aerodynamic stability. This prevents the rocket from veering off course immediately after ignition.
Ensure the launch rod is clean and free of obstructions to allow the lugs to slide smoothly during liftoff.
മെയിൻ്റനൻസ്
- പരിശോധന: Before each launch, inspect the launch lugs for any signs of damage, cracks, or loose attachment. Replace damaged lugs immediately.
- വൃത്തിയാക്കൽ: Keep the lugs clean and free of debris, dirt, or adhesive residue that could impede smooth movement on the launch rod.
- സംഭരണം: Store unused launch lugs in a cool, dry place away from direct sunlight to prevent material degradation.
ട്രബിൾഷൂട്ടിംഗ്
- Lug does not slide smoothly on launch rod:
- Ensure the correct lug diameter is selected for the launch rod.
- Check for debris or adhesive residue inside the lug or on the rod. Clean as necessary.
- Inspect the lug for deformities. Replace if damaged.
- Lug detaches during launch:
- Verify that a strong, appropriate adhesive was used for attachment.
- Ensure sufficient curing time was allowed for the adhesive.
- Re-attach with fresh adhesive, ensuring proper surface preparation.
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | 302320 |
| ബ്രാൻഡ് | എസ്റ്റസ് |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 16 Launch Lugs (8x 1/8", 4x 3/16", 2x 1/4") |
| പാക്കേജ് അളവുകൾ (L x W x H) | 6.5 x 3.4 x 0.4 ഇഞ്ച് (16.51 x 8.64 x 1.02 സെ.മീ) |
| ഇനത്തിൻ്റെ ഭാരം | 0.01 ഔൺസ് (0.28 ഗ്രാം) |
| ശുപാർശ ചെയ്യുന്ന പ്രായം | 14+ (as per safety information) |
| യു.പി.സി | 047776023208, 047776099487 |
വാറൻ്റി വിവരങ്ങൾ
Estes products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your original model rocket kit or visit the official Estes website. Generally, components like launch lugs are considered consumables or replacement parts and may not carry an extended warranty.
ഉപഭോക്തൃ പിന്തുണ
For further assistance, technical support, or inquiries regarding Estes products, please visit the official Estes webസൈറ്റിൽ നൽകുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. കോൺടാക്റ്റ് വിവരങ്ങൾ സാധാരണയായി ഉൽപ്പന്ന പാക്കേജിംഗിലോ നിർമ്മാതാവിന്റെയോ webസൈറ്റ്.
നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും Estes Store on Amazon കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്ക്.
