Brodit ProClip 854788 Angled Mount User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation and use of the Brodit ProClip 854788 Angled Mount. This custom-made, vehicle-specific mount is designed to provide a secure and stable platform for your device holder in Freightliner Class M2 – 12 vehicles. The ProClip is engineered for easy, non-invasive installation, clipping tightly into dashboard seams without requiring drilling or dismantling of vehicle components.

2. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1x Brodit ProClip 854788 Angled Mount
• ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

കുറിപ്പ്: A device holder is NOT included and must be purchased separately. The ProClip features a pre-drilled hole pattern for easy attachment of a compatible device holder.

ചിത്രം 1: The Brodit ProClip 854788 Angled Mount. This image shows the black plastic mount with a yellow stripe on one side and a label indicating "Item no. 854788 Brodit". This is the main component included in the package.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Brodit ProClip is designed for quick and secure installation without damaging your vehicle's interior. Follow these steps carefully:

1. ഉപരിതലം തയ്യാറാക്കുക: Clean the area of the dashboard where the ProClip will be installed to ensure a secure grip.
2. ഇൻസ്റ്റലേഷൻ പോയിന്റ് തിരിച്ചറിയുക: The ProClip 854788 is designed for the angled section of the dashboard to the right of the steering wheel in Freightliner Class M2 – 12 vehicles. Refer to Figure 2 for the exact placement.
3. Position the ProClip: Locate the upper edge of the ProClip (marked '1' in Figure 2). Insert this edge into the seam between the dashboard and the pillar on the right side.
4. Secure the Lower Edge: Gently press the lower part of the ProClip (marked '2' in Figure 2) into the gap between the dashboard and the center console/panel. Apply firm, even pressure until the ProClip snaps securely into place.
5. സ്ഥിരത പരിശോധിക്കുക: Once installed, gently tug on the ProClip to ensure it is firmly seated and does not wobble.

ചിത്രം 2: Installation diagram showing the placement of the Brodit ProClip 854788 in a Freightliner Class M2 – 12 dashboard. Point '1' indicates where the upper edge of the ProClip should be inserted into the dashboard seam. Point '2' indicates where the lower edge should be pressed into the dashboard gap, securing the mount to the right of the steering wheel and instrument panel.

പ്രധാനപ്പെട്ടത്: No drilling or special tools are required for installation. Ensure the ProClip is correctly aligned with the dashboard seams for optimal stability.

4. പ്രവർത്തനവും ഉപയോഗവും

Once the ProClip is securely installed, you can attach your compatible device holder. The ProClip features a pre-drilled hole pattern, allowing for easy and secure attachment of most Brodit device holders. Position your device holder to ensure it does not obstruct your view, interfere with airbags, or impede access to vehicle controls.

• Attaching Device Holder: Align the screw holes of your device holder with the pre-drilled holes on the ProClip face plate and secure it using the provided screws from your device holder kit.
• ഉപകരണം സ്ഥാപിക്കൽ: Consider the size and orientation of your device. Ensure it is placed in a position that is easily accessible but does not compromise driving safety.

5. പരിപാലനം

The Brodit ProClip requires minimal maintenance. To keep it clean, simply wipe it with a soft, damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ അബ്രസീവ് ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക, കാരണം ഇവ മെറ്റീരിയലിന് കേടുവരുത്തും.

6. പ്രശ്‌നപരിഹാരം

• Mount is not stable: Ensure the ProClip is fully inserted into both dashboard seams. Verify that the correct ProClip model (854788) is being used for your specific Freightliner Class M2 – 12 vehicle.
• Difficulty inserting: Do not force the ProClip. Re-check the alignment with the dashboard seams. A small, non-marring plastic tool can be used to gently widen the seam if necessary, but typically firm hand pressure is sufficient.
• Device holder does not fit: Ensure your device holder is compatible with Brodit ProClips and uses a standard mounting pattern.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage or technical support, please refer to the official Brodit webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ബ്രോഡിറ്റ് ഡീലറെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.