Belimo B330+AFRB24 CCV 1.25 inch 3-Way Ball Valve Instruction Manual

1. ആമുഖം

This manual provides essential information for the proper installation, operation, and maintenance of the Belimo B330+AFRB24 Characterized Control Valve (CCV). This 1.25-inch, 3-way ball valve features a 19 Cv flow coefficient and is equipped with a 24V On/Off spring return actuator. Adherence to these instructions ensures optimal performance and longevity of the device.

This image displays the Belimo B330+AFRB24 1.25 inch 3-Way Ball Valve, featuring a silver-colored valve body with a 1.25-inch connection and an orange and gray spring return actuator mounted on top. The actuator includes electrical connections and a manual override lever.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the reliable operation of the Belimo B330+AFRB24 valve. Consult local codes and regulations before beginning installation.

2.1 സുരക്ഷാ മുൻകരുതലുകൾ

• Ensure all power to the system is disconnected before installation or servicing.
• ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ ഇൻസ്റ്റാളേഷൻ നടത്തണം.

2.2 മെക്കാനിക്കൽ ഇൻസ്റ്റലേഷൻ

1. Mount the valve in an accessible location, ensuring sufficient space for maintenance and wiring.
2. Ensure the valve body is properly supported and aligned with the piping.
3. Connect the 1.25-inch pipe fittings to the valve ports. Ensure connections are leak-tight.
4. Observe flow direction indicators on the valve body, if present, to ensure correct installation within the system.

2.3 ഇലക്ട്രിക്കൽ വയറിംഗ്

The B330+AFRB24 actuator operates on 24V power and uses an On/Off control signal.

• Connect the 24V power supply to the designated terminals on the actuator. Refer to the wiring diagram provided with the actuator for specific terminal assignments.
• Connect the On/Off control signal wires according to the system's control logic.
• ഷോർട്ട് സർക്യൂട്ടുകൾ തടയാൻ എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• വൈദ്യുതി വിതരണം വോളിയം പരിശോധിക്കുകtage matches the actuator's requirements (24V).

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Belimo B330+AFRB24 valve is designed for On/Off control applications with a spring return safety function.

3.1 ഓൺ/ഓഫ് നിയന്ത്രണം

• When power is applied to the actuator, the valve will drive to its open or closed position, depending on the wiring configuration.
• When power is removed, the spring return mechanism will automatically drive the valve to its pre-set fail-safe position (typically fully open or fully closed).

3.2 മാനുവൽ അസാധുവാക്കൽ

The actuator may include a manual override lever or button. Consult the specific actuator documentation for instructions on how to manually position the valve in case of power failure or for testing purposes. Always ensure power is disconnected before attempting manual override.

4. പരിപാലനം

The Belimo B330+AFRB24 valve and actuator are designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.

• Periodically inspect the valve and actuator for any signs of leakage, corrosion, or physical damage.
• Check electrical connections for tightness and integrity.
• Ensure the valve operates smoothly through its full range of motion.
• Clean any accumulated dust or debris from the actuator housing to prevent overheating.

No lubrication or internal adjustments are typically required for the valve or actuator.

5. പ്രശ്‌നപരിഹാരം

പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ സാധ്യമായ പരിഹാരങ്ങളും അറിയാൻ താഴെ കൊടുത്തിരിക്കുന്ന പട്ടിക കാണുക.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, technical support, or service inquiries, please refer to the official Belimo website or contact your authorized Belimo distributor. Keep your purchase receipt for warranty claims.