Intermec 1-040084-900 OEM Factory Original Replacement Printhead User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This manual provides essential information for the installation, operation, and maintenance of the Intermec 1-040084-900 OEM Factory Original Replacement Printhead. This printhead is designed as a direct replacement for the PX6i Thermal 2 03dpi printer models, ensuring optimal printing performance and longevity.

Figure 1: Packaging of the Intermec 1-040084-900 Replacement Printhead. The image shows a plain white cardboard box with "Intermec" and "1-040084-900" printed in black text on one side, indicating the brand and model number of the enclosed printhead.

2 സുരക്ഷാ വിവരങ്ങൾ

Always observe the following safety precautions when handling or installing the printhead:

• Ensure the printer is powered off and unplugged before beginning any installation or maintenance.
• Allow the printhead to cool down completely if the printer has been recently in use, as it can reach high temperatures.
• Handle the printhead by its edges to avoid touching the sensitive print elements.
• Wear anti-static gloves to prevent damage from electrostatic discharge.
• Keep the printhead away from liquids and corrosive materials.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section outlines the steps for replacing an existing printhead with the Intermec 1-040084-900.

3.1. തയ്യാറാക്കൽ

1. Power off the printer and disconnect it from the power source.
2. Open the printer's cover to access the printhead assembly.
3. Remove any media (labels, ribbon) that might obstruct access to the printhead.

3.2. Printhead Replacement

1. Carefully unlatch or unscrew the old printhead from its mounting bracket. Refer to your specific printer model's service manual for exact instructions.
2. Disconnect any cables or connectors attached to the old printhead. Note their orientation for re-connection.
3. Gently remove the old printhead.
4. Unpack the new Intermec 1-040084-900 printhead, handling it by its non-sensitive parts.
5. Connect the cables and connectors to the new printhead, ensuring they are securely fastened.
6. Mount the new printhead into the printer's assembly, securing it with latches or screws.
7. Ensure the printhead is properly seated and aligned according to your printer's specifications.

3.3. പോസ്റ്റ്-ഇൻസ്റ്റലേഷൻ

1. പ്രിൻ്റർ കവർ അടയ്ക്കുക.
2. Reconnect the power cable and turn on the printer.
3. Perform a test print to verify proper installation and print quality. Adjust printhead pressure or settings if necessary, as per your printer's user guide.

4. പ്രവർത്തന പരിഗണനകൾ

While the printhead itself does not have operational controls, its performance is directly tied to the printer's operation. Adhere to the following guidelines for optimal printhead life and print quality:

• Use only high-quality, compatible thermal transfer ribbons and labels.
• Avoid excessive print darkness settings, which can reduce printhead lifespan.
• Ensure proper printhead pressure settings to prevent premature wear or poor print quality.
• Operate the printer within its recommended environmental conditions (temperature, humidity).

5. പരിപാലനം

Regular cleaning of the printhead is crucial for maintaining print quality and extending its lifespan.

5.1 ക്ലീനിംഗ് നടപടിക്രമം

1. Power off the printer and disconnect it from the power source.
2. Allow the printhead to cool down completely.
3. Using a lint-free cloth or a specialized printhead cleaning wipe moistened with isopropyl alcohol (99% pure), gently wipe across the printhead's ceramic heating elements.
4. Do not use abrasive materials or sharp objects.
5. Allow the printhead to dry completely before closing the printer and reconnecting power.

ആവൃത്തി: Clean the printhead after every ribbon change or after printing approximately 10,000 linear inches of labels, whichever comes first, or if print quality degrades.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues related to printhead performance.

7 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the Intermec 1-040084-900 Replacement Printhead:

• മോഡൽ നമ്പർ: 1-040084-900
• ബ്രാൻഡ്: ഇന്റർമെക്
• അനുയോജ്യത: Designed for Intermec PX6i Thermal Printers (203 dpi)
• തരം: OEM Factory Original Replacement Printhead
• UPC: 689749565812
• ASIN: B00BL1YXFA

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your Intermec printer or visit the official Intermec website. As an OEM replacement part, the warranty may be covered under the original printer's warranty or a separate limited warranty provided by Intermec for replacement parts.

For further assistance, contact Intermec customer service or an authorized service provider.