Molex 50-57-9402 Housing Receptacle Connector User Manual

1. ആമുഖം

This manual provides essential information for the proper installation, usage, and maintenance of the Molex 50-57-9402 Housing Receptacle Connector. Please read this manual thoroughly before attempting to use the product to ensure safe and effective operation.

2 സുരക്ഷാ വിവരങ്ങൾ

ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും നിരീക്ഷിക്കുക:

• Ensure power is disconnected from any circuit before installing or removing connectors.
• Handle small components with care to prevent damage or loss.
• Do not force connections; ensure proper alignment before insertion.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Molex 50-57-9402 is a 2-position housing receptacle connector designed for various electrical applications. It features a 2.54 mm pitch and is constructed from durable plastic with a black finish. This connector is typically used in free-hanging configurations.

Figure 3.1: Molex 50-57-9402 Housing Receptacle Connector. This image displays the black plastic housing with its two internal pin receptacles visible at one end, and the locking mechanism on the top surface.

പ്രധാന സവിശേഷതകൾ:

• ഭവന നിറം: കറുപ്പ്
• സ്ഥാനങ്ങളുടെ എണ്ണം: 2
• പിച്ച്: 2.54 മിമി
• Dimensions: 5.05 mm (L) x 6.58 mm (H) x 15.24 mm (D)
• Mounting Type: Free hanging

4. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും

The Molex 50-57-9402 connector is designed for straightforward assembly. Please note that this housing typically requires separate crimp terminals (pins) to be inserted into the housing for a complete connection. These pins are generally not included with the housing and must be acquired separately.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. വയറുകൾ തയ്യാറാക്കുക: Strip the insulation from the ends of the wires that will be connected to the terminals.
2. Crimp Terminals: Crimp the appropriate Molex terminals (pins) onto the stripped wire ends using a suitable crimping tool. Ensure a secure and proper crimp for reliable electrical contact.
3. Insert Terminals into Housing: Carefully insert the crimped terminals into the designated cavities of the 50-57-9402 housing. Ensure the terminals are oriented correctly and click into place, indicating they are fully seated and locked.
4. ബന്ധിപ്പിക്കുക: Once both terminals are securely in the housing, the receptacle connector is ready to be mated with a compatible male header or plug connector. Align the connectors and push them together until they fully engage.

Note: Refer to the specific datasheet for the terminals you are using for detailed crimping instructions.

5. ഉപയോഗം

Once installed and connected, the Molex 50-57-9402 connector provides a reliable electrical connection for two circuits. Its design ensures a secure fit, preventing accidental disconnections under normal operating conditions. This connector is suitable for low-power signal and power applications within its specified voltagഇ, നിലവിലെ റേറ്റിംഗുകൾ.

6. പരിപാലനം

The Molex 50-57-9402 connector is designed for long-term reliability and requires minimal maintenance.

• വൃത്തിയാക്കൽ: If necessary, gently clean the exterior of the connector with a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
• പരിശോധന: Periodically inspect connections for any signs of wear, corrosion, or damage. Ensure the connector remains securely mated.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Molex 50-57-9402 connector, consider the following:

• No Electrical Connection:
  • Verify that the correct terminals (pins) have been crimped onto the wires and are fully inserted into the housing. This housing does not come with pins, which are essential for electrical contact.
  • Ensure the connector is fully mated with its counterpart.
  • Check for any bent or damaged terminals within the housing or on the mating connector.
• അയഞ്ഞ കണക്ഷൻ:
  • Confirm that the terminals are properly locked into the housing. A slight tug on the wire should not pull the terminal out.
  • Ensure the mating connectors are fully engaged and the locking mechanism (if present on the mating part) is secure.
• Difficulty Mating:
  • Check for proper alignment of the connector with its mating part.
  • Inspect for any debris or foreign objects obstructing the connection.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For specific warranty information regarding the Molex 50-57-9402 Housing Receptacle Connector, please refer to the official Molex website or contact Molex customer support directly. General return policies may apply as per the retailer's terms of sale.

സാങ്കേതിക സഹായത്തിനോ കൂടുതൽ അന്വേഷണങ്ങൾക്കോ, ദയവായി സന്ദർശിക്കുക Molex official webസൈറ്റ് or consult their product documentation.