YSI 251401Y

YSI 251401Y DPD Free Chlorine Reagent Powder User Manual

For pHotoFlex and 900 Chlorine Colorimeter

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. സജ്ജീകരണവും തയ്യാറെടുപ്പും

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 Required Materials (Not Included)

3.2 റീജൻ്റ് തയ്യാറാക്കൽ

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sampലെ വോളിയം.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. എസ് തയ്യാറാക്കുകampലെ സെൽ: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sample പരീക്ഷിക്കണം.
  2. ഫിൽ എസ്ampലെ സെൽ: എസ് പൂരിപ്പിക്കുകample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. റീജന്റ് ചേർക്കുക: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sampസെല്ലിൽ le.
  4. മിക്സ്: ക്യാപ് ദി എസ്ample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. പ്രതികരണ സമയം: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. അളക്കുക: Insert the prepared sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. റെക്കോർഡ് ഫലങ്ങൾ: Record the measurement results immediately.
  8. ക്ലീനപ്പ്: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

കുറിപ്പ്: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. പരിപാലനവും സംഭരണവും

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sample.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • പരിശോധിക്കുകample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Inconsistent or erratic readings.
  • അനുചിതമായ എസ്ampലെ വോളിയം.
  • മലിനമായ എസ്ampലെ സെല്ലുകൾ.
  • സെക്കന്റുകളിലെ വായു കുമിളകൾampലെ സെൽ.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sampലെ വോളിയം.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

അനുബന്ധ രേഖകൾ - 251401Y

പ്രീview YSI മോഡൽ 32 കണ്ടക്റ്റൻസ് മീറ്റർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
YSI മോഡൽ 32 കണ്ടക്‌ടൻസ് മീറ്ററിനായുള്ള നിർദ്ദേശ മാനുവൽ, അതിന്റെ പൊതുവായ വിവരണം, സവിശേഷതകൾ, പ്രവർത്തന നടപടിക്രമങ്ങൾ, അറ്റകുറ്റപ്പണികൾ, കാലിബ്രേഷൻ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview YSI Pro20/Pro20i Quick Start Guide: Calibration and Operation
Concise guide for calibrating and operating the YSI Pro20/Pro20i dissolved oxygen meters, covering membrane installation, sensor setup, barometer and DO calibration, salinity compensation, and measurement taking. Includes essential operational steps and contact information.
പ്രീview YSI 3821 ബഫർ സൊല്യൂഷൻ pH 4.00 സുരക്ഷാ ഡാറ്റ ഷീറ്റ് (SDS)
YSI 3821 ബഫർ സൊല്യൂഷൻ pH 4.00-നുള്ള സമഗ്ര സുരക്ഷാ ഡാറ്റ ഷീറ്റ് (SDS), ഉൽപ്പന്ന തിരിച്ചറിയൽ, അപകടങ്ങൾ, ഘടന, പ്രഥമശുശ്രൂഷ, കൈകാര്യം ചെയ്യൽ, സംഭരണം, നിയന്ത്രണ വിവരങ്ങൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview YSI EcoSense DO200A/DO200M Dissolved Oxygen and Temperature Instruments User Manual
This user manual provides comprehensive instructions for operating, installing, maintaining, and troubleshooting the YSI EcoSense DO200A and DO200M dissolved oxygen and temperature instruments. It includes details on specifications, accessories, and warranty information.
പ്രീview YSIT-1 Satellite Transmitter Operation and Maintenance Manual
Comprehensive user manual for the YSI Model YSIT-1 Satellite Transmitter, covering its operation, maintenance, hardware setup, and serial command reference. Details include time management, data storage, GOES data formatting, RF transmitter control, and GPS synchronization.
പ്രീview YSI IQ Sensor Net MIQ/CHV PLUS Operating Manual
This operating manual provides detailed instructions for the YSI IQ Sensor Net MIQ/CHV PLUS valve module, covering installation, settings, maintenance, and safety guidelines for compressed air-operated sensor cleaning heads.