YSI 251398Y

YSI 251398Y DPD Free Chlorine Reagent Powder User Manual

മോഡൽ: 251398Y

ഉൽപ്പന്നം കഴിഞ്ഞുview

The YSI 251398Y DPD Free Chlorine Reagent Powder is designed for accurate measurement of free chlorine in water samples using a compatible colorimeter. Each pack contains 100 individual powder packs, with each pack formulated for a 5ml sample volume and capable of measuring free chlorine in the range of 0 to 3.5 mg/L.

This reagent utilizes the DPD (N,N-Diethyl-p-phenylenediamine) method, which reacts with free chlorine to produce a magenta color, the intensity of which is proportional to the chlorine concentration and measured by a colorimeter.

സുരക്ഷാ വിവരങ്ങൾ

Always handle chemical reagents with care. Read the Safety Data Sheet (SDS) for this product before use. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling the reagent powder. Avoid ingestion and contact with skin or eyes. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.

സജ്ജീകരണവും തയ്യാറെടുപ്പും

Before beginning any measurements, ensure you have the following:

  • YSI 251398Y DPD Free Chlorine Reagent Powder pack
  • Compatible colorimeter or spectrophotometer
  • ക്ലീൻ എസ്ample cells/vials
  • Deionized or distilled water for blanks and dilutions (if necessary)
  • വെള്ളം എസ്ample to be tested
  • ടൈമർ

തയ്യാറെടുപ്പ് ഘട്ടങ്ങൾ:

  1. Ensure all glassware and sample cells are clean and free from contamination. Rinse with deionized water before use.
  2. Calibrate your colorimeter according to its specific instruction manual before use.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps to accurately measure free chlorine using the YSI 251398Y DPD Free Chlorine Reagent Powder:

  1. Sampശേഖരം: ഒരു ശുദ്ധജലം ശേഖരിക്കുകample in a clean sample cell. The required volume is 5ml. Ensure the sample is representative of the water being tested.
  2. റീജന്റ് ചേർക്കുക: Carefully tear open one YSI 251398Y DPD Free Chlorine Reagent Powder pack. Add the entire contents of the powder pack to the 5ml water samps ലെ leampലെ സെൽ.
  3. മിക്സ്: ക്യാപ് ദി എസ്ample cell and invert several times to thoroughly mix the reagent with the sample. Ensure all powder dissolves completely. A magenta color will develop if free chlorine is present.
  4. പ്രതികരണ സമയം: Allow a reaction time of 1 minute for the color to fully develop. Do not exceed 6 minutes, as color fading may occur, leading to inaccurate results.
  5. അളവ്: Insert the prepared sample cell into your calibrated colorimeter. Follow your colorimeter's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  6. റെക്കോർഡ് ഫലങ്ങൾ: Record the measured free chlorine concentration.
Close-up of a silver foil reagent powder packet with 'VARIO.LIT Chlorine FREE-DPD' printed on it.

Image: A single YSI DPD Free Chlorine Reagent Powder packet. This silver foil packet contains the pre-measured reagent powder for a single test. The text "VARIO.LIT Chlorine FREE-DPD" is visible on the packet, indicating its contents and purpose.

പരിപാലനവും സംഭരണവും

Proper storage and handling are crucial for maintaining the integrity and effectiveness of the reagent powder:

  • സംഭരണം: Store the reagent powder packs in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store near strong acids or bases.
  • ഷെൽഫ് ലൈഫ്: Refer to the expiration date printed on the packaging. Do not use expired reagents, as they may yield inaccurate results.
  • നീക്കം ചെയ്യൽ: Dispose of used reagent and sample solutions according to local environmental regulations. Consult your local authorities for proper chemical waste disposal procedures.
  • ശുചിത്വം: Always ensure sample cells and equipment are thoroughly cleaned after each use to prevent cross-contamination.

ട്രബിൾഷൂട്ടിംഗ്

പരിശോധനയ്ക്കിടെ നിങ്ങൾക്ക് പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിഗണിക്കുക:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No color developmentNo free chlorine present; Expired reagent; Incorrect sampലെ വോളിയം.പരിശോധിക്കുകample contains chlorine; Check reagent expiration date; Ensure 5ml sampലെ വോളിയം.
Fading color or inaccurate readingReaction time exceeded; Contaminated sample cell; Turbidity in sample.Adhere strictly to 1-minute reaction time; Clean sample cells thoroughly; Filter turbid sampആവശ്യമെങ്കിൽ les.
പൊരുത്തമില്ലാത്ത ഫലങ്ങൾImproper mixing; Temperature variations; Colorimeter not calibrated.Ensure complete dissolution of powder; Perform tests at consistent temperatures; Recalibrate colorimeter.

സ്പെസിഫിക്കേഷനുകൾ

  • ഉൽപ്പന്നത്തിൻ്റെ പേര്: YSI DPD Free Chlorine Reagent Powder
  • മോഡൽ നമ്പർ: 251398Y
  • Reagent Type: DPD (N,N-Diethyl-p-phenylenediamine)
  • Analyte: ഫ്രീ ക്ലോറിൻ (Cl2)
  • Sampലെ വോളിയം: 5 മില്ലി
  • അളക്കൽ ശ്രേണി: 0 മുതൽ 3.5 മില്ലിഗ്രാം/ലിറ്റർ (പിപിഎം) വരെ
  • പാക്കേജിംഗ്: Powder packs, 100 per pack
  • നിർമ്മാതാവ്: YSI
  • ASIN: B00CMX0PDK
  • പാക്കേജ് അളവുകൾ: 8.1 x 6.9 x 1.2 ഇഞ്ച്
  • ഇനത്തിൻ്റെ ഭാരം: 3.2 ഔൺസ്

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, technical support, or to purchase additional reagents, please contact YSI customer service or visit the official YSI website. Refer to your purchase documentation for specific warranty terms and conditions.

YSI Contact Information:

  • Webസൈറ്റ്: www.ysi.com (Please note: This is a placeholder link, refer to official YSI documentation for exact contact details.)

അനുബന്ധ രേഖകൾ - 251398Y

പ്രീview YSI മോഡൽ 32 കണ്ടക്റ്റൻസ് മീറ്റർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
YSI മോഡൽ 32 കണ്ടക്‌ടൻസ് മീറ്ററിനായുള്ള നിർദ്ദേശ മാനുവൽ, അതിന്റെ പൊതുവായ വിവരണം, സവിശേഷതകൾ, പ്രവർത്തന നടപടിക്രമങ്ങൾ, അറ്റകുറ്റപ്പണികൾ, കാലിബ്രേഷൻ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview YSI Pro20/Pro20i Quick Start Guide: Calibration and Operation
Concise guide for calibrating and operating the YSI Pro20/Pro20i dissolved oxygen meters, covering membrane installation, sensor setup, barometer and DO calibration, salinity compensation, and measurement taking. Includes essential operational steps and contact information.
പ്രീview YSI 3821 ബഫർ സൊല്യൂഷൻ pH 4.00 സുരക്ഷാ ഡാറ്റ ഷീറ്റ് (SDS)
YSI 3821 ബഫർ സൊല്യൂഷൻ pH 4.00-നുള്ള സമഗ്ര സുരക്ഷാ ഡാറ്റ ഷീറ്റ് (SDS), ഉൽപ്പന്ന തിരിച്ചറിയൽ, അപകടങ്ങൾ, ഘടന, പ്രഥമശുശ്രൂഷ, കൈകാര്യം ചെയ്യൽ, സംഭരണം, നിയന്ത്രണ വിവരങ്ങൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview YSI EcoSense DO200A/DO200M Dissolved Oxygen and Temperature Instruments User Manual
This user manual provides comprehensive instructions for operating, installing, maintaining, and troubleshooting the YSI EcoSense DO200A and DO200M dissolved oxygen and temperature instruments. It includes details on specifications, accessories, and warranty information.
പ്രീview YSIT-1 Satellite Transmitter Operation and Maintenance Manual
Comprehensive user manual for the YSI Model YSIT-1 Satellite Transmitter, covering its operation, maintenance, hardware setup, and serial command reference. Details include time management, data storage, GOES data formatting, RF transmitter control, and GPS synchronization.
പ്രീview YSI IQ Sensor Net MIQ/CHV PLUS Operating Manual
This operating manual provides detailed instructions for the YSI IQ Sensor Net MIQ/CHV PLUS valve module, covering installation, settings, maintenance, and safety guidelines for compressed air-operated sensor cleaning heads.