ആമുഖം
The Alpena 77259 Dash Litz Blue LED lighting kit provides custom accent lighting for your vehicle's interior. This kit includes four micro LEDs designed for easy installation and operation, enhancing the aesthetic appeal of your vehicle's dashboard or footwell areas.
സുരക്ഷാ വിവരങ്ങൾ
- Ensure your vehicle's engine is off and the ignition is in the "OFF" position before installation.
- Do not obstruct driver's view or interfere with vehicle controls, airbags, or safety features.
- Avoid installing in areas exposed to extreme heat or moisture.
- Use only with a 12-volt DC power source.
- If you are unsure about any installation step, consult a qualified automotive technician.
പാക്കേജ് ഉള്ളടക്കം
Verify that all components are present in your Alpena 77259 Dash Litz kit:
- 4 x Micro Blue LEDs with wiring
- 1 x 12-Volt Power Plug (cigarette lighter adapter) with ON/OFF switch
- Self-adhesive 3M™ foam tape (pre-applied or included for attachment)
Image: Alpena 77259 Dash Litz product packaging, showing the four micro LEDs and the 12V power plug.
Image: The four micro LEDs, their connecting wires, and the 12-volt power plug with an integrated ON/OFF switch, laid out unlit.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- പ്ലാൻ പ്ലേസ്മെൻ്റ്: Determine the desired locations for the four micro LEDs within your vehicle's interior. Common areas include under the dashboard, footwells, or along console edges. Ensure the wiring can reach the 12-volt power outlet without obstruction.
- ശുദ്ധമായ ഉപരിതലം: Thoroughly clean the chosen installation surfaces with an alcohol wipe to remove any dust, dirt, or grease. Allow the surface to dry completely. This ensures optimal adhesion of the foam tape.
- LED-കൾ ഘടിപ്പിക്കുക: Peel the backing from the self-adhesive 3M™ foam tape on each micro LED. Carefully press each LED firmly onto the cleaned surface for at least 30 seconds to secure it.
- റൂട്ട് വയറിംഗ്: Neatly route the wiring from each LED to the central 12-volt power plug. Use cable ties or clips (not included) to secure the wires and prevent them from interfering with vehicle operation or being damaged.
- പവർ ബന്ധിപ്പിക്കുക: Insert the 12-volt power plug into your vehicle's cigarette lighter or auxiliary power outlet.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- പവർ ഓൺ: Once the 12-volt power plug is inserted into the vehicle's outlet, locate the ON/OFF switch on the power plug. Slide the switch to the "ON" position. The micro LEDs will illuminate with a blue light.
- പവർ ഓഫ്: To turn off the LEDs, slide the switch on the 12-volt power plug to the "OFF" position.
Image: The four micro LEDs illuminated with a blue light, connected to their wiring and the 12-volt power plug.
Image: The Alpena Dash Litz LEDs installed in a vehicle, casting a blue glow on the dashboard gauges and surrounding area.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: To clean the LED units, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- അഡീഷൻ: If an LED unit becomes loose, re-secure it using new automotive-grade double-sided adhesive tape. Ensure the surface is clean and dry before re-application.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| LED- കൾ പ്രകാശിക്കുന്നില്ല. |
|
|
| One or more LEDs flicker or are dim. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: Alpena 77259 Dash Litz
- ഇൻപുട്ട് വോളിയംtage: 12 വോൾട്ട് ഡിസി
- ബൾബ് തരം: LED (Micro LEDs)
- നിറം: നീല
- Dimensions (packaging): ഏകദേശം 5.1 x 4 x 1.3 ഇഞ്ച്
- Weight (total package): ഏകദേശം 4 ഔൺസ്
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support regarding your Alpena 77259 Dash Litz Blue LED lighting kit, please refer to the contact information provided on the product packaging or visit the official Alpena webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
You can visit the Alpena Store for more information: Alpena Official Store
