1. ആമുഖം
The TAKSTAR SGC-598 is a high-sensitivity condenser microphone designed for enhancing audio recording quality with DSLR cameras and DV camcorders. Its cardioid polar pattern effectively reduces ambient noise, making it suitable for interviews, photography, and various other recording occasions. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your microphone.
പാക്കേജ് ഉള്ളടക്കം
- 1 x TAKSTAR SGC-598 Microphone
- 1 x വിൻഡ്സ്ക്രീൻ
- 1 x ഇംഗ്ലീഷ് ഉപയോക്തൃ മാനുവൽ
- Note: 1.5V AA battery is required but not included.

Figure 1.1: The TAKSTAR SGC-598 microphone attached to a DSLR camera, ready for use.
2 സുരക്ഷാ വിവരങ്ങൾ
- Do not expose the microphone to extreme temperatures, humidity, or corrosive environments.
- മൈക്രോഫോൺ താഴെയിടുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യുന്നത് ഒഴിവാക്കുക.
- മൈക്രോഫോൺ വെള്ളത്തിൽ നിന്നും മറ്റ് ദ്രാവകങ്ങളിൽ നിന്നും അകറ്റി നിർത്തുക.
- മൈക്രോഫോൺ വേർപെടുത്താനോ പരിഷ്ക്കരിക്കാനോ ശ്രമിക്കരുത്. ഇത് വാറന്റി അസാധുവാക്കും.
- ഉപയോഗിച്ച ബാറ്ററികൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് ഉത്തരവാദിത്തത്തോടെ നീക്കം ചെയ്യുക.
- Ensure proper battery polarity when installing.
3. സജ്ജീകരണം
3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- Locate the battery compartment on the side of the microphone unit.
- സ്ലൈഡ് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
- Insert one 1.5V AA alkaline battery, ensuring correct polarity (+/-).
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
3.2 മൈക്രോഫോൺ മൌണ്ട് ചെയ്യുന്നു
The SGC-598 features a standard universal connector for easy attachment to your camera's hot shoe or a compatible mounting bracket.
- Slide the microphone's mounting foot into your camera's hot shoe or mounting bracket.
- Tighten the locking wheel on the microphone's base to secure it in place.
3.3 Connecting to Camera/Camcorder
Connect the microphone's 3.5mm audio output cable to the microphone input jack on your camera or camcorder.

ചിത്രം 3.1: വിശദമായി view showing the mounting interface, battery compartment, and shockproof design.

Figure 3.2: The SGC-598 microphone securely mounted on a camera, illustrating its compact integration.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 പവർ ഓൺ/ഓഫ്
Locate the ON/OFF switch on the microphone unit. Slide the switch to 'ON' to power on the microphone. Slide to 'OFF' when not in use to conserve battery life.
4.2 Sensitivity Enhancement (+10dB)
The microphone features a +10dB sensitivity enhancement switch. This can be used to boost the audio signal, which is useful in quieter environments or when recording from a distance. Switch to '+10dB' for enhanced sensitivity or '0' for standard sensitivity.
4.3 Low-Frequency Attenuation (200Hz)
The SGC-598 includes a low-frequency attenuation feature at 200Hz. This helps to reduce unwanted low-frequency noise such as wind noise, rumble, or air conditioning hum. Engage this feature when recording in noisy environments to improve clarity.
4.4 ലോ പവർ ഇൻഡിക്കേറ്റർ
The microphone is equipped with a low power indicator. When the battery level is low, this indicator will illuminate, signaling that the battery needs to be replaced soon to ensure continuous operation.

Figure 4.1: Control panel of the SGC-598, highlighting the sensitivity and power switches.
5. പരിപാലനം
5.1 വൃത്തിയാക്കൽ
- Use a soft, dry cloth to clean the microphone body.
- ലിക്വിഡ് ക്ലീനറുകൾ, ലായകങ്ങൾ, അല്ലെങ്കിൽ ഉരച്ചിലുകൾ ഉള്ള വസ്തുക്കൾ എന്നിവ ഉപയോഗിക്കരുത്.
- Gently clean the windscreen with a soft brush if it accumulates dust or debris.
5.2 സംഭരണം
- When not in use for extended periods, remove the battery to prevent leakage.
- നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും ഉയർന്ന താപനിലയിൽ നിന്നും അകന്ന് തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് മൈക്രോഫോൺ സൂക്ഷിക്കുക.
- Use the provided carrying pouch (if applicable) to protect the microphone from dust and scratches.
6. പ്രശ്നപരിഹാരം
6.1 ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല
- ബാറ്ററി പരിശോധിക്കുക: Ensure a fresh 1.5V AA battery is correctly installed and the low power indicator is not active.
- വൈദ്യുതി സ്വിച്ച്: Verify the microphone's ON/OFF switch is in the 'ON' position.
- കേബിൾ കണക്ഷൻ: Confirm the 3.5mm audio cable is securely connected to both the microphone and the camera's microphone input.
- ക്യാമറ ക്രമീകരണങ്ങൾ: Check your camera's audio input settings to ensure the external microphone is selected and input levels are appropriately set.
6.2 Poor Sound Quality (Hissing, Low Volume)
- ബാറ്ററി നില: A low battery can affect sound quality. Replace with a fresh battery.
- സംവേദനക്ഷമത ക്രമീകരണം: If audio is too low, try switching the +10dB enhancement to 'ON'. If there is excessive hiss, switch it to '0'.
- Low-Frequency Attenuation: Engage the 200Hz low-frequency attenuation if experiencing excessive rumble or wind noise.
- സാമീപ്യം: Ensure the microphone is positioned close enough to the sound source.
- Camera Input Level: Adjust your camera's audio input gain. Avoid setting it too high, which can introduce hiss, or too low, which results in weak audio.
- പാരിസ്ഥിതിക ശബ്ദം: The SGC-598 is designed to reduce ambient noise, but extreme noise levels may still affect recording quality. Try to record in quieter environments.
6.3 Microphone Not Mounting Securely
- Locking Wheel: Ensure the locking wheel on the microphone's base is fully tightened after sliding it into the hot shoe.
- അനുയോജ്യത: Verify your camera's hot shoe is a standard size compatible with the microphone's mounting foot.
7 സ്പെസിഫിക്കേഷനുകൾ
| മോണോമർ | പിന്നിലെ ഇലക്ട്രേറ്റ് |
| പോളാർ പാറ്റേൺ | കാർഡിയോയിഡ് (യൂണിഡയറക്ഷണൽ) |
| ഫ്രീക്വൻസി പ്രതികരണം | 50Hz-16kHz |
| സംവേദനക്ഷമത | -32dB ± 3dB (0kHz-ൽ 1dB = 1V/Pa) |
| മെച്ചപ്പെടുത്തിയ സംവേദനക്ഷമത | +10dB |
| ലോ-ഫ്രീക്വൻസി അറ്റൻവേഷൻ | 60Hz 10dB/octave |
| ഔട്ട്പുട്ട് ഇംപെഡൻസ് | 2000Ω ± 30% |
| പവർ ഉറവിടം | 1.5V AA Battery (not included) |
| ബാറ്ററി ലൈഫ് | Up to 100 hours (with AA alkaline battery) |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| അളവുകൾ (L x W x H) | ഏകദേശം 11.3 x 7.7 x 2.7 ഇഞ്ച് (28.7 x 19.6 x 6.9 സെ.മീ) |
| ഇനത്തിൻ്റെ ഭാരം | ഏകദേശം 5.9 ഔൺസ് (0.17 കിലോഗ്രാം) |
| കണക്റ്റർ തരം | 3.5 mm ജാക്ക് |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Camcorder, Camera (Nikon, Canon, etc.) |

ചിത്രം 7.1: ഡൈമൻഷണൽ ഓവർview of the SGC-598 microphone.
8. വാറൻ്റിയും പിന്തുണയും
8.1 വാറൻ്റി വിവരങ്ങൾ
TAKSTAR products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official TAKSTAR webസൈറ്റ്. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ വാറന്റി സാധാരണയായി ഉൾക്കൊള്ളുന്നു.
8.2 ഉപഭോക്തൃ പിന്തുണ
If you encounter any issues or have questions regarding your TAKSTAR SGC-598 microphone, please contact TAKSTAR customer support. Contact information can usually be found on the official TAKSTAR webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.





