ഉൽപ്പന്നം കഴിഞ്ഞുview
The StarTech.com ICUSBAUDIO2D External USB Sound Card provides a convenient solution to add S/PDIF digital audio output and standard 3.5mm analog audio/microphone connections to your system via USB. This device allows you to bypass or replace an internal sound card without needing to open your computer case. It supports high-quality audio with 96kHz / 24-bit sampling rates for both playback and recording, and includes a 3.5mm S/PDIF port with support for Dolby Digital 5.1 Surround Sound (AC3) and DTS Pass-through (Windows only). The adapter also features an integrated 3.5mm 4-position TRRS connection for headphones or combination headset/microphone, an external volume control, a hardware EQ switch for bass or treble boosting, and an LED status bar to display the current sampലിംഗ് നിരക്ക്.
ചിത്രം 1: മുൻഭാഗം view of the StarTech.com USB Sound Card (ICUSBAUDIO2D), showing the USB cable, main unit with volume knob, headphone and microphone jacks, and LED indicators.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This external USB sound card is designed for easy plug-and-play installation on most modern operating systems, including Windows and Mac OS X. Drivers are typically installed automatically upon connection.
ഉപകരണം ബന്ധിപ്പിക്കുന്നു
- കമ്പ്യൂട്ടറുമായി ബന്ധിപ്പിക്കുക: Plug the USB connector of the sound card into an available USB port on your computer (laptop or desktop PC).
- ഓഡിയോ put ട്ട്പുട്ട് കണക്റ്റുചെയ്യുക:
- For digital audio, connect an S/PDIF cable (not included) from the S/PDIF Line-Out port on the sound card to your digital audio receiver or speakers.
- For analog audio, connect your headphones or speakers to the 3.5mm headphone jack (marked with a headphone icon).
- മൈക്രോഫോൺ ബന്ധിപ്പിക്കുക (ഓപ്ഷണൽ): If using a separate microphone, connect it to the 3.5mm microphone jack (marked with a microphone icon). If using a 4-position TRRS headset (combined headphone/mic), plug it into the 3.5mm headphone jack.
- ഡ്രൈവർ ഇൻസ്റ്റാളേഷൻ: The operating system should automatically detect and install the necessary drivers. Verify installation in your system's Device Manager (Windows) or System Information (Mac).
ചിത്രം 2: ക്ലോസപ്പ് view of the USB connector, ready for connection to a computer's USB port.
ചിത്രം 3: പിൻഭാഗം view of the sound card, highlighting the S/PDIF Line-Out port and the Bass/Direct/Treble EQ switch.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Audio Playback and Recording
- വോളിയം നിയന്ത്രണം: Use the external rotary volume knob on the side of the unit to adjust the output volume for the analog headphone/speaker jack.
- ഇക്യു സ്വിച്ച്: The hardware EQ switch on the rear of the unit allows you to select between Bass Boost, Direct (flat), and Treble Boost modes. Adjust this setting to suit your audio preference.
- Sampലിംഗ് റേറ്റ് സൂചകങ്ങൾ: LEDs on the top of the unit indicate the current sampling rate (44.1 kHz, 48 kHz, or 96 kHz).
- Digital Audio Output (S/PDIF): For home-theater quality sound, the S/PDIF port supports Dolby Digital 5.1 Surround Sound (AC3) and DTS Pass-through. Note: 5.1 Surround Sound is supported in Windows only.
- സിസ്റ്റം ഓഡിയോ ക്രമീകരണങ്ങൾ: Ensure the StarTech.com USB Sound Card is selected as the default playback and recording device in your operating system's sound settings. You may need to adjust bit depth and sample rate settings here for optimal performance.
മെയിൻ്റനൻസ്
To ensure the longevity and optimal performance of your StarTech.com USB Sound Card, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or aerosols, as they may damage the components.
- സംഭരണം: When not in use, store the sound card in a cool, dry place away from direct sunlight and extreme temperatures.
- കൈകാര്യം ചെയ്യൽ: Handle the device with care. Avoid dropping it or subjecting it to strong impacts. Do not pull on the cable to disconnect the device from the USB port.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your StarTech.com USB Sound Card, refer to the following common troubleshooting steps:
| പ്രശ്നം | പരിഹാരം |
|---|---|
| ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല. |
|
| Hissing or static noise. |
|
| Bass sounds muddy or distorted. |
|
| 5.1 Surround Sound (AC3/DTS) not working. |
|
| Microphone input is too quiet. |
|
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 1.9 x 1.8 x 0.6 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 1.16 ഔൺസ് |
| മോഡൽ നമ്പർ | ICUSBAUDIO2D |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | പേഴ്സണൽ കമ്പ്യൂട്ടർ |
| ഹാർഡ്വെയർ ഇന്റർഫേസ് | USB |
| ഓഡിയോ put ട്ട്പുട്ട് മോഡ് | 2.1 (Stereo), 5.1 (via S/PDIF on Windows) |
| പിന്തുണയ്ക്കുന്ന പ്ലാറ്റ്ഫോമുകൾ | വിൻഡോസ്, മാക് ഒഎസ് എക്സ് |
| Sampലിംഗ് നിരക്കുകൾ | Up to 96kHz / 24-bit |
വാറൻ്റിയും പിന്തുണയും
The StarTech.com USB Sound Card (ICUSBAUDIO2D) is backed by a StarTech.com 2-year warranty and free lifetime technical support.
For further assistance or detailed documentation, please refer to the official user guide:
