TROTEC IDE 20 D Diesel Heater Instruction Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient operation of your TROTEC IDE 20 D diesel heater. Please read these instructions carefully before initial use and keep them for future reference. The TROTEC IDE 20 D is a direct-fired diesel heater designed for heating well-ventilated areas, offering a nominal heat output of 20 kW and an air flow of 595 m³/h.

ചിത്രം 1: പ്രധാനം view of the TROTEC IDE 20 D Diesel Heater, showing its robust design with wheels and handle for portability.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

ഉപകരണങ്ങൾക്ക് പരിക്കേൽക്കുകയോ കേടുപാടുകൾ സംഭവിക്കുകയോ ചെയ്യാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:

• Ensure adequate ventilation when operating the heater, as it is a direct-fired unit and consumes oxygen.
• Do not use the heater in enclosed spaces or residential areas without proper ventilation.
• Maintain a safe distance from combustible materials. Refer to local regulations for minimum clearances.
• Only use approved diesel fuel. Never use gasoline or other volatile fuels.
• Do not refuel the heater while it is running or hot. Allow it to cool down completely.
• Keep children and unauthorized persons away from the operating heater.
• Regularly inspect the power cord and plug for damage. Do not operate with a damaged cord.
• The heater is equipped with overheat protection. Do not bypass or modify safety features.
• Always place the heater on a stable, level, and non-combustible surface.

3. പാക്കേജ് ഉള്ളടക്കം

അൺപാക്ക് ചെയ്യുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• TROTEC IDE 20 D Diesel Heater unit
• Wheel assembly (wheels, axle, fasteners)
• അസംബ്ലി കൈകാര്യം ചെയ്യുക
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4. സജ്ജീകരണം

4.1 അസംബ്ലി

The heater requires minimal assembly before first use. Attach the wheels and handle to the main unit using the provided hardware. Ensure all connections are secure.

ചിത്രം 2: വശം view of the heater, illustrating the wheel and handle attachment points for mobility.

4.2 ഹീറ്ററിന് ഇന്ധനം നിറയ്ക്കൽ

1. Ensure the heater is turned off and unplugged.
2. Locate the fuel cap on top of the fuel tank.
3. Carefully pour clean diesel fuel into the tank. The tank capacity is 19 liters.
4. Monitor the fuel level indicator to avoid overfilling.
5. ഇന്ധന തൊപ്പി സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കുക.

Image 3: Detail of the fuel cap and integrated fuel level indicator for easy monitoring.

4.3 പ്ലേസ്മെൻ്റ്

Position the heater in a well-ventilated area, ensuring sufficient clearance from walls, ceilings, and any combustible materials. The heater should be placed on a firm, level surface.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 ഹീറ്റർ ആരംഭിക്കുന്നു

1. Ensure the heater is properly fueled and positioned.
2. അനുയോജ്യമായ ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.
3. Turn the power switch to the "ON" position. The fan will start, and the ignition sequence will begin.
4. The heater will automatically ignite the diesel fuel and begin producing heat.

Image 4: The control panel featuring the power switch and thermostat dial.

5.2 Adjusting Temperature (Thermostat)

The TROTEC IDE 20 D features an integrated thermostat. Use the thermostat dial on the control panel to set the desired temperature. The heater will cycle on and off automatically to maintain the set temperature.

ചിത്രം 5: മുൻഭാഗം view displaying the fan guard and pressure gauge, indicating operational status.

5.3 Shutting Down the Heater

To turn off the heater, switch the power button to the "OFF" position. The fuel supply will be cut off, but the fan will continue to run for approximately 90 seconds to cool down the unit before completely shutting off. This cool-down period is crucial for the longevity of the heater components.

6. പരിപാലനം

6.1 വൃത്തിയാക്കൽ

Ensure the heater is unplugged and completely cool before performing any cleaning. Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents. Periodically check the air intake and fan for dust or debris accumulation and clean as necessary to maintain optimal airflow.

6.2 ഇന്ധന ഫിൽട്ടർ

Regularly inspect and clean or replace the fuel filter to ensure a consistent fuel supply and efficient operation. Refer to the service manual for specific instructions on accessing and maintaining the fuel filter.

6.3 സംഭരണം

When storing the heater for extended periods, ensure the fuel tank is empty or filled with fresh, stabilized diesel fuel. Store the unit in a dry, clean environment, protected from dust and moisture. It is recommended to cover the heater to prevent dust buildup.

Image 6: The heater with its power cord neatly coiled, ready for storage or transport.

7. പ്രശ്‌നപരിഹാരം

ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുന്നതിന് മുമ്പ്, വീണ്ടുംview ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും:

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or spare parts, please contact TROTEC customer service. Details can typically be found on the manufacturer's official website or on your purchase documentation. Always provide the model number (IDE 20 D) and serial number (if applicable) when seeking support.

Note: Availability of spare parts information is not provided in the product data.