BWT CR10 NA 10" കാർബൺ & റെസിൻ കാട്രിഡ്ജ് ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This manual provides essential instructions for the installation, operation, and maintenance of your BWT CR10 NA 10" Carbon & Resin Cartridge. Please read this manual thoroughly before installation and retain it for future reference.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The BWT CR10 is a specialized carbon and resin cartridge designed for water filtration systems. It is engineered to fit standard BWT NDL2 filter housings. This cartridge effectively reduces chlorine, organic chemicals, and helps in minimizing scale and scum formation in water.

പ്രധാന സവിശേഷതകൾ:

• ക്ലോറിൻ കുറയ്ക്കൽ: Significantly reduces chlorine content in water.
• Organic Chemical Removal: Filters out various organic chemicals for improved water quality.
• Scale and Scum Control: Aids in reducing the buildup of scale and scum.
• സ്റ്റാൻഡേർഡ് ഫിറ്റ്: Designed to fit BWT NDL2 filter housings.

സ്പെസിഫിക്കേഷനുകൾ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

പ്രധാനപ്പെട്ടത്: Installation should be performed by a qualified professional or someone with adequate plumbing experience. Always shut off the main water supply before beginning installation.

1. സിസ്റ്റം തയ്യാറാക്കുക: Turn off the main water supply to the area where the filter housing is located. Open a nearby faucet to relieve pressure in the lines.
2. ആക്‌സസ് ഫിൽറ്റർ ഹൗസിംഗ്: Locate your BWT NDL2 filter housing. Depending on your setup, you may need a filter wrench to open the housing.
3. പഴയ കാട്രിഡ്ജ് നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): Carefully unscrew the filter housing sump. Remove the old cartridge and dispose of it properly.
4. വൃത്തിയുള്ള ഭവനം: Clean the inside of the filter housing sump with warm, soapy water and rinse thoroughly. Inspect the O-ring for any damage; replace if necessary. Lubricate the O-ring with a food-grade silicone grease if recommended by the housing manufacturer.
5. പുതിയ കാട്രിഡ്ജ് ഇടുക: Unwrap the new BWT CR10 cartridge. Insert the cartridge into the filter housing, ensuring it is seated correctly in the center standpipe.
6. ഭവനം വീണ്ടും കൂട്ടിച്ചേർക്കുക: Carefully screw the filter housing sump back onto the cap. Hand-tighten first, then use a filter wrench for a snug fit. അമിതമായി മുറുക്കരുത്.
7. ജലവിതരണം പുനഃസ്ഥാപിക്കുക: Slowly turn on the main water supply. Check for leaks around the filter housing.
8. ഫ്ലഷ് സിസ്റ്റം: Open a nearby cold water faucet and allow water to run for several minutes (e.g., 5-10 minutes) to flush out any air and fine carbon particles from the new cartridge. The water may appear cloudy initially; this is normal and will clear.

ചിത്രം 1: ഫ്രണ്ട് view of the BWT CR10 filter cartridge, showing its cylindrical shape and blue color.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and flushed, the BWT CR10 cartridge operates automatically as water flows through your filtration system. No further user interaction is required for its daily function.

• Ensure the water pressure remains within the specified limits (Maximum Pressure: 5 Bars).
• The cartridge is designed for cold water applications; do not exceed the maximum water temperature of 45 degrees C.

ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the BWT CR10 filter cartridge, highlighting its overall form factor.

മെയിൻ്റനൻസ്

Regular replacement of the BWT CR10 cartridge is crucial to maintain optimal water quality and system performance.

• മാറ്റിസ്ഥാപിക്കൽ ആവൃത്തി: It is recommended that cartridges be changed at least every 3 മുതൽ 6 മാസം വരെ, or after approximately 1500 ലിറ്റർ of filtered water, whichever comes first. This frequency may vary depending on local water quality and usage.
• Signs of Depletion: A noticeable decrease in water flow, a return of unpleasant tastes or odors, or a change in water clarity can indicate that the cartridge needs replacement.
• മാറ്റിസ്ഥാപിക്കൽ നടപടിക്രമം: Follow the "Setup and Installation" steps (1-7) for replacing the cartridge.

ചിത്രം 3: താഴെ view of the BWT CR10 filter cartridge, showing the inlet/outlet structure.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your BWT CR10 cartridge.

• കുറഞ്ഞ ജലപ്രവാഹം:
  • കാരണം: അടഞ്ഞുപോയ ഫിൽട്ടർ കാട്രിഡ്ജ്.
  • പരിഹാരം: Replace the cartridge. Ensure proper installation and flushing.
• Unpleasant Taste or Odor Returns:
  • കാരണം: Cartridge has reached its capacity.
  • പരിഹാരം: കാട്രിഡ്ജ് മാറ്റിസ്ഥാപിക്കുക.
• Leaks Around Filter Housing:
  • കാരണം: Improperly seated O-ring, damaged O-ring, or housing not tightened correctly.
  • പരിഹാരം: Shut off water, open housing, inspect and reseat/replace O-ring, then re-tighten housing.
• Cloudy Water After Cartridge Replacement:
  • കാരണം: Air or fine carbon particles from the new cartridge.
  • പരിഹാരം: Flush the system by running cold water for 5-10 minutes until clear. This is normal.

ചിത്രം 4: മുകളിൽ view of the BWT CR10 filter cartridge, showing the internal structure and sealing surface.

വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the BWT CR10 NA 10" Carbon & Resin Cartridge is not provided in this manual. For warranty details, technical support, or further assistance, please contact BWT customer service or refer to the official BWT webസൈറ്റ്.

നിർമ്മാതാവ്: BWT

ഭാഗം നമ്പർ: CR10