1. ആമുഖവും അവസാനവുംview
This manual provides essential instructions for the safe and effective use of the Hilti TE-YX Hammer Drill Bit, model 00293026. This carbide drill bit is designed for high-performance drilling in various base materials, including concrete, reinforced concrete, masonry, and sand-lime brick. Its robust construction features a rebar-resistant carbide tip, an optimized SDS-Max connection end, and a heat-treated flute for enhanced durability and efficient dust removal.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- TE-Y (SDS max) connection end for secure fitting.
- Suitable for concrete, reinforced concrete, masonry, and sand-lime brick.
- 17-5/8-inch working length for deep drilling applications.
- Stronger, rebar-resistant carbide tip attachment.
- Heat-treated flute for reduced wear and efficient dust removal.
Image 1: Close-up of the Hilti TE-YX Hammer Drill Bit, highlighting its robust carbide tip and spiral flute for efficient material removal.
2. സജ്ജീകരണം
Before beginning any drilling operation, ensure you have read and understood all safety instructions provided with your hammer drill and this drill bit.
2.1 സുരക്ഷാ മുൻകരുതലുകൾ
- സുരക്ഷാ ഗ്ലാസുകൾ, കേൾവി സംരക്ഷണം, കയ്യുറകൾ എന്നിവയുൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) എപ്പോഴും ധരിക്കുക.
- Ensure the hammer drill is unplugged or its battery removed before attaching or detaching the drill bit.
- Inspect the drill bit for any damage or excessive wear before each use. Do not use damaged bits.
- ജോലിസ്ഥലം തടസ്സങ്ങളില്ലാതെയും നല്ല വെളിച്ചമുള്ളതാണെന്നും ഉറപ്പാക്കുക.
2.2 ഡ്രിൽ ബിറ്റ് ഘടിപ്പിക്കൽ
- Clean the shank of the Hilti TE-YX drill bit to remove any dust or debris.
- Apply a thin layer of Hilti chuck grease (or equivalent) to the SDS-Max shank of the drill bit. This helps reduce wear and ensures smooth operation.
- Insert the drill bit into the SDS-Max chuck of your hammer drill. Push and twist the bit until it clicks into place.
- Pull on the drill bit to ensure it is securely locked. There should be a small amount of axial play, which is normal for SDS-Max systems.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Hilti TE-YX Hammer Drill Bit is designed for use with SDS-Max rotary hammer drills. Always follow the operating instructions for your specific hammer drill model.
3.1 ഡ്രില്ലിംഗ് നടപടിക്രമം
- Mark the drilling location accurately on the workpiece.
- Ensure the hammer drill is set to the "hammer drilling" mode.
- Hold the hammer drill firmly with both hands. Position the drill bit perpendicular to the surface.
- Start the drill at a low speed to create a pilot indentation, then increase to full speed once the bit has engaged the material.
- Apply steady, consistent pressure. Avoid excessive force, as the hammer action of the drill is designed to do the work.
- Periodically withdraw the drill bit slightly to allow dust to clear from the hole, especially for deeper holes. This improves drilling efficiency and bit life.
- Once the desired depth is reached, withdraw the drill bit from the hole while the drill is still running to prevent it from getting stuck.
Image 2: Hilti TE-YX Hammer Drill Bit in use with a Hilti TE 70 hammer drill, demonstrating proper drilling technique into a concrete surface.
3.2 Material Specifics
- Concrete and Reinforced Concrete: The TE-YX bit is specifically designed to handle rebar encounters. Maintain steady pressure.
- Masonry and Sand-Lime Brick: These materials may require slightly less pressure. Ensure the hammer function is engaged for optimal performance.
4. പരിപാലനം
Proper maintenance extends the life of your Hilti TE-YX Hammer Drill Bit and ensures consistent performance.
4.1 വൃത്തിയാക്കൽ
- After each use, clean the drill bit thoroughly to remove all dust and debris, especially from the flutes and the SDS-Max shank. A stiff brush or compressed air can be used.
- Reapply a thin layer of chuck grease (or equivalent) to the SDS-Max shank before storage to prevent corrosion and ensure smooth insertion for future use.
4.2 പരിശോധന
- Regularly inspect the carbide tip for chips, cracks, or excessive wear. A worn tip will reduce drilling efficiency.
- Check the flutes for signs of clogging or damage.
- Examine the SDS-Max shank for wear or deformation. Significant wear on the shank can lead to poor connection and reduced power transfer.
- Replace the drill bit if any significant damage or wear is observed.
4.3 സംഭരണം
Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips from damage.
5. പ്രശ്നപരിഹാരം
If you encounter issues while using your Hilti TE-YX Hammer Drill Bit, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മന്ദഗതിയിലുള്ള ഡ്രില്ലിംഗ് പുരോഗതി | Worn or damaged carbide tip; insufficient pressure; drill not in hammer mode; excessive dust in hole. | Inspect and replace bit if worn; apply steady pressure; ensure hammer mode is active; clear dust from hole frequently. |
| ഡ്രിൽ ബിറ്റ് കുടുങ്ങി | Insufficient dust removal; hitting rebar (less likely with TE-YX but possible); bit overheating. | Withdraw bit periodically to clear dust; ensure proper cooling; if hitting rebar, adjust drilling location if possible. |
| അമിതമായ വൈബ്രേഷൻ അല്ലെങ്കിൽ ആടിയുലയൽ | Damaged SDS-Max shank; improper bit insertion; worn hammer drill chuck. | Inspect bit shank for damage; ensure bit is fully seated and locked; inspect hammer drill chuck for wear. |
| അൽപ്പം അമിതമായി ചൂടാകൽ | Lack of dust removal; continuous drilling without breaks; drilling very hard material. | Clear dust frequently; allow bit to cool; reduce drilling speed or pressure if necessary. |
6 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Hilti TE-YX Hammer Drill Bit 00293026:
- മോഡൽ നമ്പർ: 00293026
- ബ്രാൻഡ്: ഹിൽറ്റി
- മെറ്റീരിയൽ: കാർബൈഡ്
- ഷാങ്ക് തരം: SDS-Max (TE-Y)
- വ്യാസം: 1-1/4 ഇഞ്ച്
- മൊത്തത്തിലുള്ള ദൈർഘ്യം: 23 ഇഞ്ച്
- പ്രവർത്തന ദൈർഘ്യം: 17-5/8 ഇഞ്ച്
- ഇനത്തിന്റെ അളവുകൾ (L x W x H): 23 x 1.25 x 1.25 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 2.95 പൗണ്ട്
- Tool Flute Type: സർപ്പിളം
- ഉപരിതല ശുപാർശ: Ductile (for optimal performance in concrete, reinforced concrete, masonry, sand-lime brick)
- UPC: 743153793060
7. വാറൻ്റിയും പിന്തുണയും
For information regarding warranty coverage, product support, or service for your Hilti TE-YX Hammer Drill Bit, please refer to the official Hilti website or contact Hilti customer service directly. Keep your purchase receipt and product details handy when contacting support.
