1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Toro Pressure Compensated Precision Spray 10-H Sprinkler Nozzle. This nozzle is designed to deliver efficient and precise water distribution for your irrigation system.
Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Toro Precision Spray 10-H Nozzle is engineered for water efficiency and uniform coverage. Key features include:
- Pressure Compensation: Maintains consistent flow and spray pattern across varying system pressures.
- Precision Spray: Delivers a uniform 1 inch per hour (25mm/hr) precipitation rate, matching soil infiltration.
- ഇന്റഗ്രേറ്റഡ് സ്ക്രീൻ: Helps prevent clogging from debris.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made for long-lasting performance in outdoor environments.
Image 1: The Toro Pressure Compensated Precision Spray 10-H Sprinkler Nozzle. This image shows the compact design of the nozzle, highlighting its integrated screen and the precision spray head.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- തയ്യാറാക്കൽ: Ensure the irrigation system is turned off and depressurized before beginning installation.
- പഴയ നോസൽ നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): Carefully unscrew the existing sprinkler nozzle from the riser.
- Clean Riser: Inspect the sprinkler riser for any debris or dirt. Clean thoroughly to ensure a proper seal.
- പുതിയ നോസൽ ഇൻസ്റ്റാൾ ചെയ്യുക: Screw the Toro Precision Spray 10-H Nozzle onto the sprinkler riser by hand. Do not overtighten, as this can damage the nozzle or riser threads. Tighten until snug.
- സ്പ്രേ പാറ്റേൺ ക്രമീകരിക്കുക: Once installed, turn on the irrigation system briefly to check the spray pattern. The 10-H nozzle typically provides a half-circle (180-degree) spray pattern. Adjust the arc and radius as needed by rotating the nozzle collar or top, if adjustable. Refer to your sprinkler body's instructions for specific adjustment methods.
- ചോർച്ച പരിശോധിക്കുക: Observe for any leaks around the nozzle connection. If leaks occur, turn off the system, unscrew the nozzle, re-clean threads, and re-install, ensuring a snug fit.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Toro Precision Spray 10-H Nozzle operates automatically as part of your irrigation system. Once installed and adjusted, it will deliver water according to your system's programmed schedule.
- നനവ് ഷെഡ്യൂൾ: Set your irrigation controller to a schedule appropriate for your landscape's needs, considering soil type, plant requirements, and local climate.
- നിരീക്ഷണം: Periodically observe the nozzle during operation to ensure the spray pattern remains consistent and there are no obstructions.
5. പരിപാലനം
Regular maintenance helps ensure the longevity and efficiency of your sprinkler nozzle.
- സ്ക്രീൻ ക്ലീനിംഗ്: The integrated screen can accumulate debris over time. If you notice reduced flow or an irregular spray pattern, turn off the system, unscrew the nozzle, and carefully remove and clean the screen under running water. Reinstall the screen and nozzle.
- ശീതകാലം: In regions subject to freezing temperatures, ensure your irrigation system, including nozzles, is properly winterized according to your system manufacturer's guidelines to prevent freeze damage.
- ശാരീരിക പരിശോധന: Periodically check nozzles for any physical damage, cracks, or wear. Replace damaged nozzles promptly to maintain system efficiency.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Reduced water flow or irregular spray. | Clogged nozzle screen or orifice. | Turn off water, remove nozzle, clean screen and orifice. |
| Water leaking from base of nozzle. | Nozzle not tightened properly or damaged threads. | Turn off water, unscrew, inspect threads, re-tighten snugly. Replace if threads are damaged. |
| നോസിലിൽ നിന്ന് വെള്ളമില്ല. | System pressure too low, or complete blockage. | Check system pressure. Inspect for major blockages in the riser or supply line. |
7 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ | O-T-10-HP |
| ബ്രാൻഡ് | ടോറോ |
| മഴയുടെ നിരക്ക് | 1 inch/hour (25mm/hr) |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 1 x 1 x 1 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 1.28 ഔൺസ് |
| യു.പി.സി | 090258054894 |
8. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the official Toro website or contact Toro customer service directly. Keep your purchase receipt as proof of purchase.
നിർമ്മാതാവ്: ടോറോ
