1. ആമുഖം
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of the Securitron BPS-24-1 Power Supply. The BPS-24-1 is a regulated and filtered power supply designed to convert 120VAC input to a stable 24VDC, 1 Amp output. Please read this manual thoroughly before attempting any installation or operation.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്:
WHEN LIGHT IS ON – HIGH VOLTAGE AND HIGH ENERGY DANGER IS PRESENT WITHIN. MAY ONLY BE OPENED BY TRAINED SERVICE PERSONNEL.
Always adhere to local electrical codes and regulations during installation and servicing. Disconnect all power sources before performing any work on the unit. Only qualified and trained service personnel should attempt to open the enclosure or perform internal maintenance. Failure to comply with these safety warnings may result in serious injury or death.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Securitron BPS-24-1 Power Supply is housed in a robust, off-white metal enclosure designed for durability and protection of internal components. The front panel includes a red indicator light that illuminates when the unit is powered on, signaling the presence of high voltage within. The enclosure also features knockouts for conduit connections.
Figure 1: Securitron BPS-24-1 Power Supply. This image shows the front and top of the power supply unit, highlighting the warning label and indicator light.
4 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ഇൻപുട്ട് വോളിയംtage | 120VAC |
| Putട്ട്പുട്ട് വോളിയംtage | 24VDC |
| ഔട്ട്പുട്ട് കറൻ്റ് | 1 Amp |
| ഔട്ട്പുട്ട് വാട്ട്tage | 24 വാട്ട്സ് |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 9.3 x 4.1 x 9.3 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 8 പൗണ്ട് |
| തണുപ്പിക്കൽ രീതി | വായു |
| ഫോം ഫാക്ടർ | ATX (Enclosed Box) |
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- സൈറ്റ് തിരഞ്ഞെടുക്കൽ: Choose a dry, well-ventilated location for mounting the power supply, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate space for ventilation and access.
- മൗണ്ടിംഗ്: Securely mount the power supply enclosure to a stable surface using appropriate fasteners. Ensure the unit is level.
- Wiring (Input): Connect the 120VAC input power to the designated terminals inside the enclosure. All wiring must comply with national and local electrical codes. Use appropriate gauge wiring for the current draw. Ensure power is disconnected at the circuit breaker before making any connections.
- Wiring (Output): Connect your 24VDC devices to the output terminals. Observe correct polarity (+ and -). The BPS-24-1 provides a 1 Amp output. Do not exceed this rating.
- ഗ്രൗണ്ടിംഗ്: Ensure the power supply enclosure is properly grounded according to electrical codes.
- അന്തിമ പരിശോധന: Before applying power, double-check all connections for tightness and correct wiring. Ensure no loose strands or short circuits are present.
Installation should only be performed by trained and qualified personnel due to the presence of high voltage.
6. ഓപ്പറേഷൻ
Once the Securitron BPS-24-1 Power Supply is correctly installed and wired, operation is straightforward:
- പവർ ഓൺ: Apply 120VAC power to the unit by turning on the associated circuit breaker.
- ഇൻഡിക്കേറ്റർ ലൈറ്റ്: The red indicator light on the front panel will illuminate, signifying that the unit is receiving input power and providing 24VDC output.
- പവർ ഓഫ്: To power off the unit, disconnect the 120VAC input power at the circuit breaker. The indicator light will extinguish.
7. പരിപാലനം
The Securitron BPS-24-1 Power Supply is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure longevity and performance:
- വിഷ്വൽ പരിശോധന: Periodically inspect the exterior of the enclosure for any signs of damage, corrosion, or overheating.
- കണക്ഷൻ പരിശോധന: With power disconnected, verify that all input and output wiring connections remain secure and free from corrosion.
- വൃത്തിയാക്കൽ: Keep the exterior of the unit clean and free of dust and debris. Do not use liquid cleaners directly on the unit.
Internal maintenance or opening of the enclosure should only be performed by trained service personnel due to the risk of high voltage.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your Securitron BPS-24-1 Power Supply, refer to the following basic troubleshooting steps:
- പവർ/ഇൻഡിക്കേറ്റർ ലൈറ്റ് ഓഫല്ല:
- Check the 120VAC input power source and circuit breaker.
- Verify that the input wiring connections are secure.
- ഔട്ട്പുട്ട് വോളിയം ഇല്ലtage:
- Ensure the unit is receiving input power (indicator light is on).
- Check the output wiring connections for proper polarity and tightness.
- Verify that the connected load does not exceed the 1 Amp output rating. Overloading can cause the unit to shut down or damage it.
- അസാധാരണമായ ശബ്ദങ്ങൾ അല്ലെങ്കിൽ ദുർഗന്ധം:
- Immediately disconnect power to the unit.
- Do not attempt to open or repair the unit. Contact qualified service personnel.
For issues not resolved by these steps, or for any internal component failures, contact a qualified electrician or Securitron technical support.
9. വാറൻ്റിയും പിന്തുണയും
For information regarding the warranty coverage for your Securitron BPS-24-1 Power Supply, please refer to the warranty documentation provided at the time of purchase or visit the official Securitron website. For technical support, product inquiries, or service, please contact Securitron customer service through their official channels.
