Viper 7856V 2-Way LED Replacement Remote Control Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the proper use and maintenance of your Viper 7856V 2-Way LED Replacement Remote Control. This remote is designed to replace or upgrade your existing Viper system remote, offering enhanced functionality and convenience.

ചിത്രം 1: ഫ്രണ്ട് view of the Viper 7856V 2-Way LED Replacement Remote Control, showing the Viper logo and five control buttons.

2 പ്രധാന സവിശേഷതകൾ

• 2-Way LED Communication: Provides visual and audible confirmation of commands sent to your vehicle.
• വിപുലീകരിച്ച ശ്രേണി: Operates effectively up to 1 mile, allowing control from a significant distance.
• 5-Button Transmitter: Dedicated buttons for common functions such as lock, unlock, remote start, and auxiliary controls.
• അനുയോജ്യത: Designed to work with Viper models 3606V, 3806V, 4606V, 4806V, 5606V, and 5806V.
• റീചാർജ് ചെയ്യാവുന്ന ഡിസൈൻ: Features a micro-USB charging port for convenient recharging, eliminating the need for frequent battery replacements.

3. സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

The Viper 7856V remote control requires programming to your vehicle's Viper system. This process typically involves placing your vehicle's system into programming mode and then synchronizing the new remote. Refer to your vehicle's Viper system installation manual for specific programming steps, as procedures may vary by system model.

General Programming Tips:

• Ensure your vehicle's battery is fully charged before attempting programming.
• Locate the control button or switch for programming, usually found near the vehicle's fuse box or under the dashboard.
• Some systems may require the "Transmitter programming" feature to be set to "Unlocked" before new devices can be added. Consult your system's advanced settings if programming fails.
• If you encounter difficulties, professional installation or assistance from a certified Viper dealer is recommended.

ചിത്രം 2: വശം view of the Viper 7856V remote, showing the 'f' button which is often used in programming sequences.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Viper 7856V remote provides intuitive control over your vehicle's security and remote start system. The LED indicators and audible feedback confirm successful command execution.

ബട്ടൺ പ്രവർത്തനങ്ങൾ:

The 2-way communication feature provides visual feedback on the remote's LED indicators, confirming whether your command was received and executed by the vehicle.

5. പരിപാലനം

റിമോട്ട് ചാർജ് ചെയ്യുന്നു:

The Viper 7856V remote control features a built-in rechargeable battery. To charge, connect a standard micro-USB cable to the charging port located on the side of the remote. The LED indicators will show charging status. A full charge typically lasts for an extended period, but regular charging is recommended to ensure optimal performance.

ചിത്രം 3: വശം view of the Viper 7856V remote, highlighting the micro-USB charging port.

Battery Replacement (if applicable for older models):

While the 7856V is rechargeable, some older Viper remotes may use replaceable coin cell batteries (e.g., CR2016). If you have an older model requiring battery replacement, carefully open the remote casing, replace the old battery with a new one of the same type, and reassemble. Ensure proper polarity. For the 7856V, focus on recharging.

പൊതു പരിചരണം:

• Keep the remote dry and away from extreme temperatures.
• റിമോട്ട് താഴെയിടുന്നത് ഒഴിവാക്കുക അല്ലെങ്കിൽ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുക.
• Clean the remote with a soft, dry cloth. Do not use harsh chemicals.

6 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 4: തിരികെ view of the Viper 7856V remote control.

7. പ്രശ്‌നപരിഹാരം

• റിമോട്ട് പ്രതികരിക്കുന്നില്ല:
  • Ensure the remote's battery is charged.
  • Verify the remote is within the operating range of your vehicle.
  • Check if the vehicle's security system is armed or disarmed as expected.
• പ്രോഗ്രാമിംഗ് പ്രശ്നങ്ങൾ:
  • Double-check the programming steps in your Viper system's manual.
  • Confirm that the vehicle's system is in programming mode.
  • Ensure the "Transmitter programming" setting is unlocked if applicable.
• ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം:
  • Environmental factors or radio interference can affect range. Try operating from a different location.
  • Ensure no physical obstructions are blocking the signal path.

If problems persist after attempting these troubleshooting steps, contact customer support or a certified Viper technician.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical assistance, or further support regarding your Viper 7856V 2-Way LED Replacement Remote Control, please contact the seller or visit the official Viper webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.