1. ആമുഖം
The Kanlux JVT3-16D is a versatile programmable digital timer designed for various electrical control applications. This device allows for precise scheduling of electrical circuits, offering convenience and energy efficiency. It supports up to 18 distinct programs for daily or weekly operation.
പ്രധാന സവിശേഷതകൾ:
- Programmable digital timer.
- Minimum time setting: 1 minute.
- Display precision: 1 second.
- Accuracy: +/- 2 seconds per 24 hours.
- Up to 18 programmable events (ON/OFF cycles).
- Daily or weekly programming options.
- Designed for distributor installation (DIN rail compatible).
- Occupies 2 division units on a DIN rail.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- എല്ലാ പ്രാദേശിക, ദേശീയ ഇലക്ട്രിക്കൽ കോഡുകൾക്കും അനുസൃതമായി യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനാണ് ഇൻസ്റ്റാളേഷൻ നടത്തേണ്ടത്.
- Ensure the main power supply is disconnected before installing, wiring, or servicing the timer.
- Do not exceed the maximum load rating of the timer.
- ഉപകരണത്തെ ഈർപ്പം, വെള്ളം അല്ലെങ്കിൽ തീവ്രമായ താപനില എന്നിവയ്ക്ക് വിധേയമാക്കരുത്.
- ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Kanlux JVT3-16D digital timer features a compact design suitable for DIN rail mounting. It includes a digital display for time and program settings, along with control buttons for programming and manual override.
ചിത്രം 1: ഫ്രണ്ട് view of the Kanlux JVT3-16D Digital Timer. This image shows the compact white housing, the digital display panel, and the Kanlux JVT3-16D branding. Terminal connections are visible at the top and bottom for electrical wiring.
ഘടകങ്ങൾ:
- ഡിജിറ്റൽ ഡിസ്പ്ലേ: Shows current time, day, and programming parameters.
- നിയന്ത്രണ ബട്ടണുകൾ: Used for setting time, programming events, and manual control.
- ടെർമിനലുകൾ: Input and output connections for electrical wiring.
- DIN റെയിൽ ക്ലിപ്പ്: ഒരു സ്റ്റാൻഡേർഡ് DIN റെയിലിൽ സുരക്ഷിതമായി മൗണ്ടുചെയ്യുന്നതിന്.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The JVT3-16D timer is designed for installation within an electrical distribution board, typically mounted on a DIN rail.
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Ensure the main power supply to the distribution board is completely switched off before commencing installation. Verify with a voltagഇ ടെസ്റ്റർ.
- മൗണ്ടിംഗ്: Clip the timer onto a standard 35mm DIN rail. The device occupies two standard division units.
- വയറിംഗ്: Connect the input power supply and the load to be controlled to the appropriate terminals as indicated on the device. Refer to the wiring diagram printed on the timer or in the full product documentation. Ensure all connections are secure.
- വൈദ്യുതി പുനഃസ്ഥാപിക്കൽ: Once installation and wiring are complete and verified, restore power to the distribution board.
- പ്രാരംഭ പവർ-അപ്പ്: Upon first power-up, the display may be blank or show default settings. The internal battery will maintain settings during power outages once charged.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
This section outlines how to set the current time and program ON/OFF events for the Kanlux JVT3-16D timer. Specific button names are generalized as they are not provided in the product data.
5.1. നിലവിലെ സമയവും ദിവസവും ക്രമീകരിക്കുന്നു
- അമർത്തുക "CLOCK" button (or equivalent time-setting button). The hour display will start flashing.
- ഉപയോഗിക്കുക "HOUR" ഒപ്പം "MINUTE" buttons to adjust the current hour and minute.
- അമർത്തുക "DAY" button to select the current day of the week.
- അമർത്തുക "CLOCK" വീണ്ടും സ്ഥിരീകരിച്ച് സമയ ക്രമീകരണ മോഡിൽ നിന്ന് പുറത്തുകടക്കുക.
5.2. ഓൺ/ഓഫ് ഇവന്റുകൾ പ്രോഗ്രാമിംഗ് ചെയ്യുക
The timer supports up to 18 ON/OFF programs. Each program consists of an ON time and an OFF time.
- അമർത്തുക "PROG" button (or equivalent program button). The display will show "1 ON" (for program 1 ON time).
- ഉപയോഗിക്കുക "HOUR" ഒപ്പം "MINUTE" buttons to set the desired ON time for program 1.
- അമർത്തുക "DAY" button to select the days of the week for this program. Options typically include: every day, weekdays, weekends, specific days (e.g., Mon-Wed-Fri), or individual days.
- അമർത്തുക "PROG" again. The display will show "1 OFF" (for program 1 OFF time).
- Set the desired OFF time and days using the "HOUR", "MINUTE", ഒപ്പം "DAY" ബട്ടണുകൾ.
- Repeat steps 1-5 for additional programs (2 ON/OFF, 3 ON/OFF, up to 18 ON/OFF).
- ആവശ്യമുള്ള എല്ലാ പ്രോഗ്രാമുകളും സജ്ജീകരിച്ച ശേഷം, അമർത്തുക "CLOCK" button to exit programming mode and return to normal operation.
5.3. മാനുവൽ അസാധുവാക്കൽ
The timer usually includes a manual override function to temporarily switch the output ON or OFF, independent of the programmed schedule.
- അമർത്തുക "MANUAL" or "ON/AUTO/OFF" button (or equivalent) to cycle through modes: ON, AUTO, OFF.
- ഓൺ: Output is continuously ON.
- ഓഫാണ്: Output is continuously OFF.
- സ്വയമേവ: The timer operates according to the programmed schedule.
5.4. Resetting the Timer
To clear all settings and return the timer to its factory default state, locate the small reset button (often recessed) and press it using a pointed object (e.g., a pen tip). This will erase all programmed events and reset the current time.
6. പരിപാലനം
The Kanlux JVT3-16D digital timer requires minimal maintenance.
- വൃത്തിയാക്കൽ: Wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners, solvents, or allow moisture to enter the device.
- ബാറ്ററി: The timer contains an internal rechargeable battery to maintain settings during power outages. This battery is typically maintenance-free and has a long lifespan. If the display is consistently blank after a power outage, the battery may need replacement by a qualified technician.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ടൈമർ ഡിസ്പ്ലേ ശൂന്യമാണ്. | No power supply. Internal battery discharged. | Check power connections. Allow time for internal battery to charge (typically 24 hours after initial power-up). If problem persists, consult a technician. |
| Programs are not executing. | Timer is in manual ON/OFF mode. Incorrect time/day setting. Programs not correctly set. | Ensure the timer is in "AUTO" mode. Verify current time and day settings. Re-check programmed ON/OFF times and days. |
| Load does not switch ON/OFF. | Incorrect wiring. Faulty load. Timer malfunction. | Verify wiring connections (ensure power is off). Test the load directly. If wiring and load are correct, the timer may be faulty; seek professional assistance. |
| Time drifts significantly. | Normal accuracy variation. | The timer has an accuracy of +/- 2 seconds per 24 hours. Minor adjustments may be needed periodically. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ്: | കാൻലക്സ് |
| മോഡൽ നമ്പർ: | JVT3-16D (Manufacturer Reference: 18720) |
| പ്രോഗ്രാമുകളുടെ എണ്ണം: | 18 |
| Minimum Time Setting: | 1 മിനിറ്റ് |
| Display Precision: | 1 സെക്കൻഡ് |
| കൃത്യത: | +/- 2 seconds / 24 hours |
| ഇൻസ്റ്റലേഷൻ തരം: | DIN Rail (2 division units) |
| ASIN: | B00HN9ALDW |
9. വാറൻ്റിയും പിന്തുണയും
Warranty information for the Kanlux JVT3-16D Digital Timer is typically provided with the product at the time of purchase. Please refer to the documentation included in the product packaging for specific warranty terms and conditions.
For technical support, service, or inquiries regarding spare parts, please contact your retailer or visit the official Kanlux website. Information regarding spare parts availability is currently unavailable through general product data.
