Wilo Yonos Pico 25/1-6 Domestic Circulator Pump User Manual

1. ആമുഖം

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of the Wilo Yonos Pico 25/1-6 domestic circulator pump. This high-efficiency pump is designed for hot water heating, air conditioning, and industrial circulation systems. Please read these instructions thoroughly before commencing any work with the pump.

Figure 1: Wilo Yonos Pico 25/1-6 Domestic Circulator Pump. The image shows the green pump housing connected to a silver-grey control unit with a digital display and a red rotary knob.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Failure to follow these safety instructions may result in personal injury or damage to the equipment. Keep this manual accessible for future reference.

• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: Installation and maintenance must only be performed by qualified and authorized personnel in accordance with local regulations and standards.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the power supply is disconnected before any installation or maintenance work. All electrical connections must comply with local electrical codes.
• Hot Surfaces/Water: The pump and connected pipes may become hot during operation. Allow the system to cool down before handling.
• പ്രവർത്തന പരിധികൾ: Do not operate the pump outside its specified operating limits (voltage, temperature, pressure).
• സംരക്ഷണം: Ensure the pump is protected from frost and direct exposure to weather elements.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Wilo Yonos Pico 25/1-6 is a high-efficiency, electronically controlled circulator pump designed for various heating and air conditioning applications. Its compact design and advanced features ensure reliable and energy-efficient operation.

പ്രധാന സവിശേഷതകൾ:

• Simple circulation pump for heating and air conditioning systems.
• High-efficiency motor with electronic control.
• Digital display for operational status and settings.
• User-friendly interface with a rotary knob for adjustments.

4. ഇൻസ്റ്റലേഷൻ

Proper installation is crucial for the pump's performance and longevity. Always ensure the system is depressurized and drained before installation.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. മൗണ്ടിംഗ് സ്ഥാനം: Install the pump in a horizontal position with the motor shaft horizontal. Ensure sufficient space for ventilation and maintenance.
2. പൈപ്പ് കണക്ഷൻ: Connect the pump to the piping system using appropriate fittings. Ensure all connections are watertight. Avoid mechanical stress on the pump from the piping.
3. ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the pump to the electrical supply according to the wiring diagram provided with the product and local electrical regulations. Ensure proper grounding. The pump operates on 230 Volts (AC).
4. Filling and Venting: After installation, fill the system with the appropriate fluid and vent the pump thoroughly to remove any trapped air.

5. പ്രാരംഭ സജ്ജീകരണം

Once installed and electrically connected, the pump requires initial setup.

1. പവർ ഓൺ: Restore power to the pump. The digital display will illuminate.
2. ഓപ്പറേറ്റിംഗ് മോഡ് തിരഞ്ഞെടുക്കൽ: Use the rotary knob on the control unit to select the desired operating mode (e.g., constant differential pressure, variable differential pressure, fixed speed). Refer to the pump's specific display icons for mode identification.
3. ക്രമീകരണം ക്രമീകരിക്കുക: Adjust the required head or speed setting using the rotary knob. The display will show the current setting or power consumption.

6. ഓപ്പറേഷൻ

The Wilo Yonos Pico 25/1-6 is designed for continuous operation. Once set up, it will automatically adjust its performance based on the selected operating mode and system requirements.

• നിരീക്ഷണം: Periodically check the digital display for current operating status and any error codes.
• ക്രമീകരണങ്ങൾ: If system requirements change, you can re-adjust the operating mode or settings using the rotary knob.
• ഷട്ട് ഡൗൺ: To temporarily stop the pump, disconnect its power supply. For extended periods of non-use, follow maintenance guidelines for storage.

7. പരിപാലനം

The Wilo Yonos Pico 25/1-6 is largely maintenance-free. However, periodic checks can help ensure optimal performance and extend its lifespan.

• വിഷ്വൽ പരിശോധന: Regularly inspect the pump for any signs of leaks, corrosion, or unusual wear.
• സിസ്റ്റം മർദ്ദം: Ensure the system pressure is within the recommended range for the pump.
• വൃത്തിയാക്കൽ: Keep the exterior of the pump and the control unit clean and free from dust and debris to ensure proper ventilation.
• ശീതകാലം: If the pump is installed in an area prone to freezing temperatures and the system is shut down, ensure the pump and pipes are drained to prevent frost damage.

8. പ്രശ്‌നപരിഹാരം

സാങ്കേതിക പിന്തുണയുമായി ബന്ധപ്പെടുന്നതിന് മുമ്പ്, വീണ്ടുംview താഴെ പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ സാധ്യമായ പരിഹാരങ്ങളും.

9 സാങ്കേതിക സവിശേഷതകൾ

10. വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation provided with your purchase or contact your seller. For technical support or inquiries regarding spare parts, please contact Wilo customer service or an authorized Wilo service partner.

നിർമ്മാതാവ്: വിലോ

മോഡൽ: Yonos Pico 25/1-6

റഫറൻസ്: 4164026/14ഡബ്ല്യു01