1. ആമുഖം
Welcome to the user manual for your new Gingko Design Cube Alarm Clock. This innovative and stylish alarm clock is designed to provide time, date, and temperature information in a sleek, wood-effect block with an intelligent LED display. Its unique sound-activated feature allows the display to appear with a simple click of your fingers or a gentle tap, ensuring a dark room at night while providing instant access to information when needed.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- Sound-activated LED display (time, date, temperature)
- Alarm setting with clever snooze function
- Weekday or weekend alarm setting options
- Compact and minimalist design
2. സജ്ജീകരണം
2.1 Powering Your Clock
The Gingko Cube Alarm Clock can be powered by batteries or via a constant power source using the included USB cable.
- ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: The clock requires 1 Lithium Polymer battery (not included). Open the battery compartment cover located on the back of the clock. Insert the battery, ensuring correct polarity. Close the cover securely.
- യുഎസ്ബി പവർ: For continuous display and to avoid frequent battery changes, connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a compatible USB power adapter (not included) or a powered USB port.
ചിത്രം: പിൻഭാഗം view of the Gingko Cube Alarm Clock, illustrating the battery compartment with AAA batteries inserted and the control buttons above it. The battery cover is shown detached to the right.
2.2 Initial Settings (Time, Date, Alarm)
The control buttons (SET, UP, DOWN, V/S, RESET) are located on the back of the clock. Specific button functions may vary slightly by firmware version, but the general process is as follows:
- ക്രമീകരണങ്ങൾ ആക്സസ് ചെയ്യുന്നു: അമർത്തിപ്പിടിക്കുക സെറ്റ് ക്രമീകരണ മോഡിൽ പ്രവേശിക്കാൻ ബട്ടൺ.
- Navigating Options: ഉപയോഗിക്കുക UP ഒപ്പം താഴേക്ക് buttons to adjust values or cycle through options (e.g., 12/24-hour format, time, date, temperature unit).
- Confirming Settings: അമർത്തുക സെറ്റ് button again to confirm a setting and move to the next option.
- അലാറം സജ്ജീകരണം: Within the setting mode, you will find options to set up to three alarms (A1, A2, A3). You can enable/disable alarms and set specific times. Some models allow setting alarms for weekdays only or all days.
- സ്നൂസ് പ്രവർത്തനം: When an alarm sounds, pressing any button (often the താഴേക്ക് or വി/എസ് button) will activate the snooze function, delaying the alarm for a short period.
3. Operating Your Clock
3.1 ഡിസ്പ്ലേ മോഡുകൾ
The clock can cycle through different display modes: time, date, and temperature. By default, it often alternates between these. You can typically set it to display time only if preferred.
Image: The Gingko Cube Alarm Clock in white, showcasing its LED display showing the current time (15:19). The minimalist design highlights the digital numbers appearing to float on the wood-effect surface.
Image: The Gingko Cube Alarm Clock displaying the temperature (19°C). This view emphasizes the clean lines and compact size of the clock, suitable for a desk or bedside table.
3.2 Sound Activation
When the room is quiet, the display automatically switches off to conserve power and avoid light disturbance. To activate the display, simply:
- Click your fingers
- Clap your hands
- Gently tap the clock or the surface it rests on
The display will light up, showing the current information, and then turn off again after a few seconds of silence.
3.3 അലാറം പ്രവർത്തനം
The alarm can be set for specific times and offers a clever snooze function. You can configure the alarm to sound on weekdays or across all days, depending on your preference. When the alarm sounds, press any button to activate snooze or press and hold a specific button (refer to your clock's specific instructions) to turn off the alarm for the day.
4. പരിപാലനം
4.1 വൃത്തിയാക്കൽ
To maintain the appearance of your Gingko Cube Alarm Clock, wipe it gently with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the wood-effect finish or internal components.
4.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
If using batteries, replace them when the display becomes dim or the clock stops responding. Refer to section 2.1 for battery installation instructions. Always dispose of used batteries responsibly according to local regulations.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your Gingko Cube Alarm Clock, please refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം / പരിഹാരം |
|---|---|
| ഡിസ്പ്ലേ ഓഫാണ് അല്ലെങ്കിൽ മങ്ങിയതാണ്. |
|
| Time/Date resets when power is lost. | This is expected behavior if the clock loses power (e.g., batteries removed or USB power disconnected). You will need to reset the time and date after power is restored. |
| Cannot change alarm sound or volume. | The Gingko Cube Alarm Clock typically has a fixed alarm sound and volume. These settings are generally not user-adjustable. |
| ബട്ടണുകൾ പ്രതികരിക്കുന്നില്ല. | Ensure the clock has sufficient power. Try a soft reset by briefly disconnecting and reconnecting power. If issues persist, contact customer support. |
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ജിങ്കോ |
| മോഡൽ നമ്പർ | GK08W13 |
| നിറം | വെള്ള |
| മെറ്റീരിയൽ | Wood (Others Wood) |
| ഉൽപ്പന്ന അളവുകൾ | 2.5"ആംശം x 2.5"ആംശം |
| ഇനത്തിൻ്റെ ഭാരം | 0.007 ഔൺസ് (ഏകദേശം 0.2 ഗ്രാം) |
| പവർ ഉറവിടം | Battery Powered (1 Lithium Polymer battery required) or USB DC5V |
| ഡിസ്പ്ലേ തരം | ഡിജിറ്റൽ LED |
| പ്രത്യേക സവിശേഷതകൾ | Alarm, Snooze, Sound Activation, Temperature Display |
| ഓപ്പറേഷൻ മോഡ് | ഇലക്ട്രിക്കൽ |
7. വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact your retailer. Gingko products typically come with a manufacturer's warranty covering defects in materials and workmanship.
If you require further assistance or have questions not covered in this manual, please contact Gingko customer support through their official website or the retailer from whom you purchased the product. Please have your model number (GK08W13) and purchase details ready when contacting support.
