ആമുഖം
This manual provides essential information for the proper setup, operation, and maintenance of your E-Image 2 Stage Aluminum Video Tripod with GH03 Fluid Pan/Tilt Video Head (Model EG03A2). Designed for professional videography, this tripod system offers stable support and smooth camera movements for various shooting environments. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
ബോക്സിൽ എന്താണുള്ളത്
താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- GA752 2 Stage Aluminum Tripod 75mm Ball with Mid-Level Spreader
- GH03 75mm Pro Fluid Video Head
- Handle for GH03 Fluid Video Head
- Camera Plate for GH03/06/08/10 Fluid Video Heads
- Mid-Level Spreader
- Tripod Rubber Feet (pre-installed or separate)
- SC-1 Padded Tripod Bag
സജ്ജമാക്കുക
Follow these steps to set up your tripod system:
- Unpack and Extend Legs: Remove the tripod from its bag. Release the leg locks on each of the three sections. Extend the legs to the desired height. The 3-section leg design with mono-lock allows for quick and secure height adjustments. Ensure all leg locks are firmly secured before proceeding.
- Attach Mid-Level Spreader: The GA752 tripod includes a mid-level spreader. Position the spreader arms between the tripod legs and secure them. This enhances stability, especially on uneven surfaces.
- Mount the Fluid Head: The GH03 fluid head is designed to fit the 75mm bowl of the GA752 tripod. Place the fluid head onto the tripod's 75mm bowl. Secure it by tightening the locking knob located beneath the bowl. Ensure the head is level using the integrated bubble level.
- Attach Pan Handle: Insert the pan handle into the designated receptacle on the GH03 fluid head and tighten its locking screw. Adjust the angle of the handle for comfortable operation.
- Attach Camera Plate: The camera plate slides into the quick-release receiver on the fluid head. Attach your camera to the camera plate using the provided mounting screw. Ensure the camera is securely fastened to the plate before sliding it onto the head.
Figure 1: The E-Image EG03A2 tripod system fully assembled, showing the fluid head, pan handle, and extended legs with mid-level spreader.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
This section details the operation of the GH03 Fluid Video Head and tripod legs.
- പാൻ, ടിൽറ്റ് നിയന്ത്രണം: The GH03 fluid head features variable friction drag for both pan (-60° to +90° tilt range) and tilt movements. Adjust the tension knobs on the side of the head to achieve the desired level of drag. Loosen for free movement, tighten for increased resistance, allowing for smooth, controlled camera movements.
- കൌണ്ടർബാലൻസ്: The fluid head incorporates a counterbalance system to assist with camera stability and prevent accidental tilting. Familiarize yourself with its operation to ensure your camera remains balanced at various tilt angles.
- ഉയരം ക്രമീകരിക്കൽ: The tripod legs can be adjusted from a minimum height of 26 inches to a maximum height of 66.5 inches. Use the mono-lock leg clamps to extend or retract each leg section. Always ensure the tripod is stable and level before mounting your camera.
- ലോഡ് കപ്പാസിറ്റി: The system is designed to support equipment weighing up to 11 pounds (approximately 4kg). Do not exceed this weight limit to prevent damage to the tripod and ensure safe operation.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and reliable performance of your tripod system.
- വൃത്തിയാക്കൽ: After each use, wipe down the tripod legs and head with a soft, dry cloth to remove dust, dirt, and moisture. For stubborn grime, use a slightly damp cloth and then dry thoroughly. Avoid using harsh chemicals or abrasive cleaners.
- ലൂബ്രിക്കേഷൻ: The fluid head is factory-lubricated and generally does not require additional lubrication. If movements become stiff over time, consult a professional service technician. Do not attempt to disassemble the fluid head.
- സംഭരണം: Store the tripod in its padded bag (SC-1) in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged or lightly tightened to prevent stress on components during storage.
- പരിശോധന: Periodically inspect all screws, knobs, and leg locks for tightness. Ensure the rubber feet are intact and provide adequate grip.
ട്രബിൾഷൂട്ടിംഗ്
നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ട്രൈപോഡ് അസ്ഥിരമാണ് അല്ലെങ്കിൽ ഇളകുന്ന അവസ്ഥയിലാണ്. | Leg locks not fully engaged; uneven surface; mid-level spreader not properly secured. | Ensure all leg locks are firmly tightened. Adjust leg lengths to compensate for uneven terrain. Verify the mid-level spreader is fully extended and locked. |
| Pan/tilt movements are not smooth. | Drag tension set too high or too low; dirt/debris in fluid head mechanism. | Adjust the variable friction drag knobs to the desired setting. Clean the exterior of the fluid head. If the issue persists, professional servicing may be required. |
| Camera plate does not secure properly. | Camera screw loose; plate not fully inserted into receiver. | Ensure the camera is tightly screwed onto the camera plate. Slide the plate fully into the quick-release receiver until it clicks into place, then engage the safety lock. |
| Leg sections do not extend/retract smoothly. | Dirt or sand inside leg sections; leg locks are too tight. | Clean the leg sections thoroughly. Loosen the leg locks slightly if they are excessively tight. Avoid forcing the legs. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | EG03A2 |
| ബ്രാൻഡ് | Ikan (Manufacturer: E-Image) |
| മെറ്റീരിയൽ | അലുമിനിയം |
| ട്രൈപോഡ് ഹെഡ് തരം | Fluid Head (GH03) |
| ബൗൾ വലിപ്പം | 75 മി.മീ |
| ഭാര പരിധി | 11 പൗണ്ട് (4 കി.ഗ്രാം) |
| കുറഞ്ഞ ഉയരം | 26 ഇഞ്ച് |
| പരമാവധി ഉയരം | 66.5 ഇഞ്ച് |
| ടിൽറ്റ് റേഞ്ച് | -60° / +90° |
| Product Dimensions (Packed) | 37 x 8 x 8.5 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 16 പൗണ്ട് |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | ക്യാമറ |
| നിറം | കറുപ്പ് |
വാറൻ്റിയും പിന്തുണയും
Specific warranty details for the E-Image EG03A2 tripod system are not provided in this manual. For information regarding warranty coverage, technical support, or service, please refer to the official Ikan or E-Image webസൈറ്റിൽ ബന്ധപ്പെടുക, അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
For further assistance, you may visit the manufacturer's support page or contact their customer service directly. Links to manufacturer support are typically found on their official product pages.
