1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The HENDI 271346 Roasting Thermometer/Timer is a versatile kitchen tool designed to accurately monitor temperatures during cooking, especially for roasting. It features a durable stainless steel probe suitable for oven use and includes a timer function for precise cooking control.
Image: The HENDI 271346 digital thermometer and timer unit with its attached stainless steel probe, ready for use.
പ്രധാന സവിശേഷതകൾ:
- ടൈമർ പ്രവർത്തനം: Allows for precise timing of cooking processes.
- വിശാലമായ താപനില പരിധി: Measures from 0°C to 300°C (32°F to 572°F).
- തിരഞ്ഞെടുക്കാവുന്ന യൂണിറ്റുകൾ: Easily switch between Celsius (°C) and Fahrenheit (°F).
- Accurate Graduation: Provides readings with 1°C (or 0.1°C resolution as per specifications) precision.
- ലോക്ക് മോഡ്: For continuous temperature monitoring.
- Min/Max Temperature Function: Records the lowest and highest temperatures measured.
- Programmable Temperature Alarm: Alerts you when the target temperature is reached.
- ഡ്യൂറബിൾ പ്രോബ്: 150 mm stainless steel probe designed to remain in the oven (heat resistant).
- ബാറ്ററി പ്രവർത്തിപ്പിക്കുന്നത്: Convenient and portable, battery included.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read all safety instructions carefully before using the device. Improper use can lead to damage or injury.
- Probe Handling: The stainless steel probe is sharp. Handle with care to avoid injury.
- പ്രധാന യൂണിറ്റ്: The main thermometer unit is NOT waterproof. Do not immerse it in water or other liquids. Clean with a damp തുണി മാത്രം.
- Probe Heat Resistance: The probe and its cable are designed to withstand high oven temperatures (up to 250°C). However, avoid direct flame contact.
- കുട്ടികൾ: ഉപകരണം കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- ബാറ്ററി സുരക്ഷ: Ensure correct battery polarity. Remove batteries if the device will not be used for an extended period. Dispose of batteries responsibly.
- ഉദ്ദേശിച്ച ഉപയോഗം: This device is intended for food temperature measurement only. Do not use for other purposes.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജ് തുറക്കുമ്പോൾ, താഴെ പറയുന്ന എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- HENDI 271346 Thermometer/Timer Unit
- 150 mm Stainless Steel Temperature Probe
- Battery (pre-installed or included separately)
Image: All components of the HENDI 271346 thermometer, including the main unit, probe, and a probe clip/holder.
4. സജ്ജീകരണം
- ബാറ്ററി ഇൻസ്റ്റാളേഷൻ:
Locate the battery compartment on the back of the main unit. Open the cover, insert the included battery (typically AAA) ensuring correct polarity (+/-), and close the compartment securely.
- അന്വേഷണ കണക്ഷൻ:
Insert the probe's jack firmly into the designated port on the side of the main unit. Ensure a secure connection for accurate readings.
- പ്രാരംഭ പവർ ഓൺ:
Press the power button (if available, otherwise it may power on automatically upon probe connection or battery insertion). The display should light up, showing the current ambient temperature.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1. താപനില അളക്കൽ
- പ്രോബ് പ്ലേസ്മെൻ്റ്: Insert the stainless steel probe into the thickest part of the food, avoiding bones or gristle, for the most accurate temperature reading.
- താപനില നിരീക്ഷിക്കൽ: The current temperature will be displayed on the main unit's screen.
- Using in Oven: The probe and its cable are oven-safe. Ensure the main unit remains outside the oven, away from direct heat.
Image: The HENDI 271346 thermometer in use, with the probe inserted into a piece of meat to monitor its internal temperature.
5.2. Setting Temperature Units (°C/°F)
Press the "°C/°F S/S" button to toggle between Celsius and Fahrenheit temperature displays.
5.3. Setting a Target Temperature (Alarm)
- Press the "SET TEMP" button (or similar, based on common thermometer interfaces, assuming it's the same as the °C/°F button or a dedicated one if present).
- Use the "MIN" and "SEC" buttons (or up/down arrows if present) to adjust the desired target temperature.
- Once the target temperature is set, the alarm will sound when the probe reaches this temperature.
5.4. ടൈമർ ഫംഗ്ഷൻ ഉപയോഗിക്കുന്നു
The device also functions as a timer.
- Press the "MODE" button (if available, or a long press on "S/S" might switch modes) to enter timer mode.
- Use the "MIN" and "SEC" buttons to set the desired countdown time.
- Press the "S/S" button to start or stop the timer. An alarm will sound when the timer reaches zero.
5.5. Min/Max Temperature Function
ഈ പ്രവർത്തനം നിങ്ങളെ അനുവദിക്കുന്നു view the minimum and maximum temperatures recorded since the device was powered on or reset.
- Press a dedicated "MIN/MAX" button (if available) or cycle through modes to view ഈ മൂല്യങ്ങൾ.
- To reset the min/max values, consult the device's specific button combination (often a long press on the min/max button or power cycle).
5.6. ലോക്ക് മോഡ്
The lock mode is designed to monitor temperature continuously without accidental changes to settings.
- Activate lock mode by pressing the designated "LOCK" button (if available) or a specific button combination.
- In lock mode, the display will continue to show the current temperature, but buttons will be unresponsive until unlocked.
6. പരിപാലനം
Proper maintenance ensures the longevity and accuracy of your HENDI thermometer.
- അന്വേഷണം വൃത്തിയാക്കുന്നു: After each use, clean the stainless steel probe thoroughly with warm soapy water. Rinse and dry completely. The probe can be wiped with a damp തുണി.
- പ്രധാന യൂണിറ്റ് വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് പ്രധാന യൂണിറ്റ് തുടയ്ക്കുകamp cloth. Do NOT immerse the main unit in water or place it under running water. Avoid abrasive cleaners or solvents.
- സംഭരണം: Store the thermometer and probe in a clean, dry place when not in use. Keep the probe tip protected to prevent damage.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the display dims or the device stops functioning, replace the battery. Follow the battery installation steps in Section 4.1.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഡിസ്പ്ലേ ശൂന്യമോ മങ്ങിയതോ ആണ്. | Low or dead battery. Incorrect battery installation. | Replace the battery. Ensure battery is inserted with correct polarity. |
| Inaccurate temperature readings (e.g., showing +50°C initially). | Probe not fully inserted. Probe or cable damage. Environmental interference. | Ensure the probe jack is fully seated. Check probe and cable for visible damage. Try testing in a known temperature environment (e.g., ice water for 0°C). If the issue persists, the probe or unit may be faulty. |
| അലാറം മുഴങ്ങുന്നില്ല. | Alarm volume too low or muted. Target temperature not set correctly. | Check if there's a volume setting (unlikely for this type of device, but check manual if available). Re-set the target temperature. |
| ബട്ടണുകൾ പ്രതികരിക്കുന്നില്ല. | Device is in Lock Mode. Battery issue. | Deactivate Lock Mode. Replace battery. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 271346 |
| ബ്രാൻഡ് | ഹെണ്ടി |
| താപനില പരിധി | 0°C മുതൽ 300°C വരെ (32°F മുതൽ 572°F വരെ) |
| താപനില റെസലൂഷൻ | 0.1°C |
| അന്വേഷണ ദൈർഘ്യം | 150 മി.മീ |
| പ്രോബ് മെറ്റീരിയൽ | സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ |
| Main Unit Material | Stainless Steel (exterior) |
| അളവുകൾ (L x W x H) | 2.6 x 11.9 x 23.1 cm (approx. 65x70x17 mm for the unit itself) |
| ഭാരം | 118 ഗ്രാം |
| പവർ ഉറവിടം | Battery Powered (Battery included) |
| Heat Resistance (Probe) | Up to 250°C (Oven-safe) |
| മാതൃരാജ്യം | ചൈന |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation included with your purchase or visit the official HENDI website. HENDI provides high-quality products and exceptional service.
If you encounter any issues not covered in this manual or require further assistance, please contact HENDI customer support through their official channels. Always provide your product model number (271346) when seeking support.
You can find more information about HENDI products and support at: www.hendi.eu
