ഹണ്ടർ XC ഹൈബ്രിഡ് ഇറിഗേഷൻ കൺട്രോളർ ഉപയോക്തൃ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hunter XC Hybrid Battery Powered Irrigation Controller is designed for reliable, professional-grade irrigation in locations without direct AC power. This 6-zone sprinkler timer operates on three 9V batteries, eliminating the need for complex wiring or trenching. It is suitable for both indoor and outdoor use, featuring a waterproof housing that protects against environmental elements.

Key features include independent programming for each zone, allowing tailored watering schedules, and a simple, tool-free installation process with clearly labeled terminals.

ചിത്രം 1: മുൻഭാഗം view of the Hunter XC Hybrid Controller with its protective door closed, showing the display and control dial. Two keys are visible, indicating a lockable enclosure.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect power (remove batteries) before performing any maintenance or wiring.
• Ensure the controller is installed in a location protected from direct sunlight and extreme temperatures to prolong its lifespan.
• Use only the specified battery type (9V) and ensure correct polarity during installation.
• Keep the controller's door securely latched to maintain its waterproof integrity.
• Do not attempt to open or repair the sealed electronic components. Refer to qualified service personnel.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

3.1 കൺട്രോളർ മൌണ്ട് ചെയ്യുന്നു

The XC Hybrid controller can be mounted indoors or outdoors. Choose a location that is easily accessible and provides adequate protection from physical damage. Use appropriate screws and anchors for the mounting surface.

Figure 2: The Hunter XC Hybrid Controller securely mounted on a brick wall, demonstrating a typical outdoor installation scenario. A conduit pipe is connected to the bottom for wiring.

3.2 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The controller requires three 9V alkaline batteries for operation. Open the front door of the controller. The battery compartment is located inside. Insert the batteries, ensuring correct polarity as indicated within the compartment.

ചിത്രം 3: ഇൻ്റീരിയർ view of the Hunter XC Hybrid Controller with the door open, revealing the battery compartment (with three 9V batteries installed) and clearly labeled wiring terminals for irrigation zones.

3.3 വയറിംഗ് കണക്ഷനുകൾ

Connect the common wire from your irrigation valves to the terminal labeled "COM". Connect each zone wire to its corresponding numbered terminal (1-6). The terminals are clearly labeled for easy connection. Ensure all connections are secure.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The XC Hybrid controller features a simple dial and push-button interface for programming. Rotate the dial to select the desired programming function.

4.1 തീയതിയും സമയവും ക്രമീകരിക്കുക

ഡയൽ ഇതിലേക്ക് തിരിക്കുക തീയതി/സമയം. Use the arrow buttons to adjust the current year, month, day, and time. Press the right arrow to move to the next setting.

4.2 Programming Start Times

ഡയൽ ഇതിലേക്ക് തിരിക്കുക ആരംഭ സമയം. Use the arrow buttons to set up to four independent start times for your watering programs. Each start time will activate all programmed zones.

4.3 Setting Run Times (Station Durations)

ഡയൽ ഇതിലേക്ക് തിരിക്കുക ടൈംസ് പ്രവർത്തിപ്പിക്കുക. Select each zone (1-6) using the arrow buttons and set the desired watering duration in minutes for each zone. Each zone can have a unique run time.

4.4 Selecting Water Days

ഡയൽ ഇതിലേക്ക് തിരിക്കുക ജലദിനങ്ങൾ. Choose your watering schedule: specific days of the week, odd/even days, or interval watering. Use the arrow buttons to select and confirm your preference.

4.5 മാനുവൽ പ്രവർത്തനം

To manually water all stations, turn the dial to Manual All Stations. To manually water a single station, turn the dial to മാനുവൽ സിംഗിൾ സ്റ്റേഷൻ, then use the arrow buttons to select the desired zone and duration.

4.6 System Off

To stop all automatic watering, turn the dial to സിസ്റ്റം ഓഫാണ്. The controller will not run any programmed cycles until the dial is moved to another position.

4.7 Seasonal Adjust

ഡയൽ ഇതിലേക്ക് തിരിക്കുക സീസണൽ ക്രമീകരിക്കുക. This feature allows you to globally increase or decrease watering durations for all zones by a percentage, adapting to changing seasonal needs without reprogramming individual zones.

5. പരിപാലനം

5.1 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the battery indicator on the display shows low power, replace the 9V batteries. Open the controller door, remove the old batteries, and insert new ones, observing polarity. Battery life can vary depending on usage and environmental conditions.

5.2 വൃത്തിയാക്കൽ

Wipe the exterior of the controller with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the internal components remain dry.

5.3 Winterization (for cold climates)

In regions subject to freezing temperatures, it is recommended to remove the batteries and store the controller indoors during winter months to prevent damage from extreme cold.

6. പ്രശ്‌നപരിഹാരം

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

8.1 വാറൻ്റി വിവരങ്ങൾ

The Hunter XC Hybrid Controller is built for long-term durability and backed by Hunter's industry-leading irrigation technology. For specific warranty terms and conditions, please refer to the official Hunter website or contact Hunter customer service.

8.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, troubleshooting beyond this manual, or parts inquiries, please contact Hunter Industries customer support. Visit the official Hunter webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കും അധിക ഉറവിടങ്ങൾക്കുമായി സൈറ്റ്.

കൂടുതൽ വിവരങ്ങളും പിന്തുണയും നിങ്ങൾക്ക് ഇവിടെ കണ്ടെത്താനാകും ആമസോണിലെ ഹണ്ടർ സ്റ്റോർ.