VTech DS6151 / DS6101

VTech DS6151 Base with 3 Additional DS6101 Cordless Handsets Bundle

ഉപയോക്തൃ മാനുവൽ

Model: DS6151 / DS6101

ഉൽപ്പന്നം കഴിഞ്ഞുview

The VTech DS6151 + (3) DS6101 Bundle Telephone System provides a comprehensive communication solution for your home or office. This system includes a cordless base unit (DS6151) and three additional cordless handsets (DS6101), offering multi-location convenience and advanced features.

VTech DS6151 base unit with one cordless handset docked, and three additional DS6101 cordless handsets in their charging cradles. The base unit has a large display and keypad, and the handsets are black with silver keypads.

Image: VTech DS6151 base unit with one cordless handset docked, and three additional DS6101 cordless handsets in their charging cradles. The base unit has a large display and keypad, and the handsets are black with silver keypads.

Key features of this system include:

സജ്ജീകരണ ഗൈഡ്

1. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിട്ടുണ്ടെന്ന് പരിശോധിക്കുക:

2. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. ഓരോ ഹാൻഡ്‌സെറ്റിന്റെയും പിൻഭാഗത്തുള്ള ബാറ്ററി കമ്പാർട്ട്‌മെന്റ് കവർ തുറക്കുക.
  2. കമ്പാർട്ടുമെന്റിനുള്ളിലെ ജാക്കിലേക്ക് ബാറ്ററി പായ്ക്ക് പ്ലഗ് സുരക്ഷിതമായി ബന്ധിപ്പിക്കുക.
  3. Place the battery pack into the compartment with the label facing up.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ അടയ്ക്കുക.
  5. Place each handset in its respective charger to charge for at least 16 hours before initial use. A fully charged battery provides optimal performance.

3. ബേസ് യൂണിറ്റ് ബന്ധിപ്പിക്കുന്നു.

  1. Plug one end of the telephone line cord into the TEL LINE jack on the back of the DS6151 base unit.
  2. ടെലിഫോൺ ലൈൻ കോഡിന്റെ മറ്റേ അറ്റം ഒരു ടെലിഫോൺ വാൾ ജാക്കിൽ പ്ലഗ് ചെയ്യുക.
  3. Plug the large end of the base unit's power adapter into an electrical outlet not controlled by a wall switch.
  4. Plug the small end of the power adapter into the POWER jack on the back of the DS6151 base unit.
  5. എല്ലാ കേബിളുകളും സുരക്ഷിതമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.

4. ഹാൻഡ്‌സെറ്റ് രജിസ്ട്രേഷൻ

The handsets included in this bundle are pre-registered to the base unit. If a handset becomes unregistered or you purchase additional DS6101 handsets, follow these steps to register them:

  1. Place the handset you wish to register into the base unit's cradle.
  2. അടിസ്ഥാന യൂണിറ്റിൽ, അമർത്തിപ്പിടിക്കുക ഹാൻഡ്‌സെറ്റ് കണ്ടെത്തുക button for approximately 4 seconds until the IN USE light on the base unit turns on.
  3. On the handset, the screen will display "Registering..." followed by "Handset Registered" and a beep when successful.
  4. If registration fails, remove the handset from the base, wait a few moments, and repeat the process.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

കോളുകൾ ചെയ്യലും സ്വീകരിക്കലും

Using the Digital Answering System

The DS6151 base unit features a built-in digital answering system with separate mailboxes for each line.

Phonebook and Caller ID

Two-Line Operation

This system supports two separate telephone lines. The base unit and handsets have dedicated buttons or indicators for Line 1 and Line 2.

മെയിൻ്റനൻസ്

നിങ്ങളുടെ ഫോൺ വൃത്തിയാക്കൽ

Clean the phone with a soft, slightly damp cloth. Do not use cleaning agents or abrasive powders. Avoid spraying liquids directly onto the phone.

ബാറ്ററി കെയർ

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your VTech DS6151/DS6101 system, try the following common troubleshooting steps:

പ്രശ്നംപരിഹാരം
ഡയൽ ടോൺ ഇല്ല.
  • ബേസ് യൂണിറ്റിന്റെ പവർ അഡാപ്റ്റർ പ്രവർത്തിക്കുന്ന ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്‌ലെറ്റിൽ സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • ടെലിഫോൺ ലൈൻ കോർഡ് ബേസ് യൂണിറ്റുമായും വാൾ ജാക്കുമായും ദൃഢമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടോയെന്ന് പരിശോധിക്കുക.
  • വാൾ ജാക്ക് സജീവമാണെന്ന് ഉറപ്പാക്കാൻ മറ്റൊരു ഫോൺ ഉപയോഗിച്ച് അത് പരീക്ഷിക്കുക.
Handset displays "No Link to Base" or similar.
  • അടിസ്ഥാന യൂണിറ്റിന് അടുത്തേക്ക് ഹാൻഡ്സെറ്റ് നീക്കുക.
  • അടിസ്ഥാന യൂണിറ്റ് ഓണാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Re-register the handset to the base unit (refer to "Handset Registration" in the Setup Guide).
Poor sound quality, static, or echo.
  • അടിസ്ഥാന യൂണിറ്റിന് അടുത്തേക്ക് ഹാൻഡ്സെറ്റ് നീക്കുക.
  • Avoid placing the base unit near other electronic devices (e.g., microwaves, Wi-Fi routers, computers) that may cause interference.
  • ടെലിഫോൺ ലൈൻ കോഡ് കുരുങ്ങുകയോ കേടാകുകയോ ചെയ്തിട്ടില്ലെന്ന് ഉറപ്പാക്കുക.
മറുപടി നൽകുന്ന സംവിധാനം സന്ദേശങ്ങൾ റെക്കോർഡ് ചെയ്യുന്നില്ല.
  • Check if the answering system is turned on.
  • Ensure there is sufficient recording time available. Delete old messages if necessary.
  • Verify that the number of rings is set correctly.
Handset buttons unresponsive or difficult to use for prompts.
  • Ensure the handset battery is fully charged.
  • Clean the keypad and screen gently with a soft, dry cloth.
  • If the issue persists, a system reset (unplugging the base unit for a few minutes) might resolve it.

സാങ്കേതിക സവിശേഷതകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ഉൽപ്പന്ന അളവുകൾ9.1 x 9.1 x 9.1 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം5.09 പൗണ്ട്
ASINB00JRE6YMS
ബാറ്ററികൾ1 AA batteries required (included) per handset
സാങ്കേതികവിദ്യDECT 6.0
ടെലിഫോൺ തരംകോർഡ്ലെസ്സ്
ഉത്തരം നൽകുന്ന സിസ്റ്റം തരംഡിജിറ്റൽ
മെറ്റീരിയൽഅക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡീൻ സ്റ്റൈറൈൻ (എബിഎസ്)
പവർ ഉറവിടംBattery Powered (Handsets), AC Adapter (Base)
നിർമ്മാതാവ്വിടെക്
ആദ്യം ലഭ്യമായ തീയതിഏപ്രിൽ 17, 2014
അനുയോജ്യമായ ഉപകരണങ്ങൾVTech DS6101 Handsets

വാറൻ്റിയും പിന്തുണയും

വിശദമായ വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക VTech കാണുക. website or contact VTech customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

You can often find additional support resources, FAQs, and contact information on the വിടെക് ഔദ്യോഗിക Webസൈറ്റ്.

അനുബന്ധ രേഖകൾ - DS6151 / DS6101

പ്രീview VTech DS6101 ആക്സസറി ഹാൻഡ്‌സെറ്റ് ഉപയോക്തൃ മാനുവൽ
DS6151/DS6151-11 ടെലിഫോൺ ബേസിനൊപ്പം VTech DS6101 ആക്സസറി ഹാൻഡ്‌സെറ്റ് സജ്ജീകരിക്കുന്നതിനും രജിസ്റ്റർ ചെയ്യുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള നിർദ്ദേശങ്ങൾ ഈ ഉപയോക്തൃ മാനുവലിൽ നൽകുന്നു. ബാറ്ററി ഇൻസ്റ്റാളേഷനും ചാർജിംഗും, ബെൽറ്റ് ക്ലിപ്പ്, ഹെഡ്‌സെറ്റ് ഉപയോഗം, ഹാൻഡ്‌സെറ്റ് രജിസ്ട്രേഷനും മാറ്റിസ്ഥാപിക്കലും, പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview VTech DS6151 കോർഡ്‌ലെസ് ഫോൺ ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
VTech DS6151 സീരീസ് കോർഡ്‌ലെസ് ഫോണിനായുള്ള ഒരു ദ്രുത ആരംഭ ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, ബാറ്ററി ചാർജിംഗ്, കോളുകൾ ചെയ്യൽ/ഉത്തരം നൽകൽ, ഉത്തരം നൽകുന്ന സംവിധാനം ഉപയോഗിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview VTech DS6151 ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
VTech DS6151 കോർഡ്‌ലെസ് ഫോൺ സിസ്റ്റം ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും സജ്ജീകരിക്കുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള സംക്ഷിപ്ത ഗൈഡ്, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, കോളുകൾ വിളിക്കൽ/ഉത്തരം നൽകൽ, ഉത്തരം നൽകുന്ന സംവിധാനം കൈകാര്യം ചെയ്യൽ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview VTech DS6151 ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്: സജ്ജീകരണം, സവിശേഷതകൾ, ഉത്തരം നൽകുന്ന സംവിധാനം
VTech DS6151 2-ലൈൻ കോർഡ്‌ലെസ് ഫോൺ സിസ്റ്റം ഉപയോഗിച്ച് വേഗത്തിൽ ആരംഭിക്കുക. ഈ ഗൈഡ് ഇൻസ്റ്റാളേഷൻ, ബാറ്ററി സജ്ജീകരണം, കോളുകൾ ചെയ്യൽ/ഉത്തരം നൽകൽ, ഡിജിറ്റൽ ആൻസറിംഗ് സിസ്റ്റം ഉപയോഗിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview VTech കോർഡ്‌ലെസ് ഫോൺ മാനുവൽ ഡീരജിസ്ട്രേഷൻ കോഡുകളും നടപടിക്രമങ്ങളും
VTech കോർഡ്‌ലെസ് ഫോൺ മോഡലുകളുടെ രജിസ്ട്രേഷൻ റദ്ദാക്കുന്നതിനുള്ള ഒരു ഗൈഡ്, 'ഔട്ട് ഓഫ് റേഞ്ച്' അല്ലെങ്കിൽ 'നോ പവർ' പോലുള്ള വിവിധ മോഡലുകൾക്കും സാഹചര്യങ്ങൾക്കുമുള്ള നിർദ്ദിഷ്ട കോഡുകളും ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങളും ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview വിടെക് അനലോഗ് കണ്ടംപററി സീരീസ് കോർഡ്‌ലെസ് ടെലിഫോൺ ഉപയോക്തൃ ഗൈഡ്
CTM-A2421-BATT, CTM-A242SD, CTM-A242SDU, CTM-C4201, C4011, C4011-USB തുടങ്ങിയ മോഡലുകൾ ഉൾക്കൊള്ളുന്ന VTech അനലോഗ് കണ്ടംപററി സീരീസ് കോർഡ്‌ലെസ് ടെലിഫോണുകൾക്കായുള്ള സമഗ്ര ഉപയോക്തൃ ഗൈഡ്. സജ്ജീകരണം, പ്രവർത്തനം, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവയെക്കുറിച്ച് അറിയുക.