PROFLO PFWO355 1-1/2" Brass Lift and Turn Tub Drain Kit

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The PROFLO PFWO355 is a 1-1/2 inch brass lift and turn tub drain kit designed for bathtubs with overflow. This kit provides the necessary components for a functional and aesthetically pleasing tub drain system, featuring a durable chrome finish. It is intended for use in standard residential plumbing applications.

Image 1.1: Components of the PROFLO PFWO355 Tub Drain Kit, including the overflow elbow, drain shoe, face plate, and lift and turn stopper.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in property damage or personal injury.

• Always turn off the main water supply before working on plumbing fixtures.
• ഇൻസ്റ്റാളേഷൻ സമയത്ത് സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• ചോർച്ച തടയാൻ എല്ലാ കണക്ഷനുകളും ശരിയായി അടച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• ഇൻസ്റ്റലേഷൻ പ്രക്രിയയുടെ ഏതെങ്കിലും ഭാഗത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്ലംബറെ സമീപിക്കുക.
• ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all components listed below are present and undamaged before proceeding with installation. This kit is a "half kit" and does not include the connecting pipe between the overflow and drain shoe.

• Plastic Drain Elbow
• Plastic Overflow Elbow
• 1-1/2 inch Threaded Drain Shoe
• One-Hole Face Plate (Chrome Finish)
• Lift and Turn Stopper Assembly (Chrome Finish)
• Mounting Screws for Face Plate
• Gaskets/Washers (as required for sealing)

ചിത്രം 3.1: ഒരു ബദൽ view of the PROFLO Tub Drain Kit components, showing the plastic elbows and chrome-finished drain parts.

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section outlines the general steps for installing the PROFLO PFWO355 tub drain kit. It is recommended to consult a professional plumber if you are unfamiliar with plumbing installations. Ensure you have all necessary tools, including plumber's putty or silicone sealant, pipe wrench, and screwdriver.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. Prepare the Bathtub: Ensure the bathtub drain and overflow openings are clean and free of debris. If replacing an old drain, remove all old components and sealant.
2. Install Overflow Elbow: From the underside of the tub, connect the plastic overflow elbow to the overflow opening. Secure it firmly.
3. Install Drain Shoe: Apply a bead of plumber's putty or silicone sealant around the underside of the drain shoe flange. Insert the drain shoe into the tub's drain opening from the top. From underneath, attach the plastic drain elbow to the threaded portion of the drain shoe. Tighten securely, ensuring a watertight seal.
4. Connect Overflow and Drain: (Note: This kit does not include the connecting pipe. You will need to supply a suitable pipe, typically PVC or ABS, to connect the overflow elbow to the drain shoe elbow.) Measure and cut the pipe to the correct length. Connect the pipe between the two elbows using appropriate plumbing cement or connectors, ensuring a tight, leak-free connection.
5. Install Face Plate: From inside the tub, align the one-hole face plate with the overflow opening. Secure it using the provided mounting screws. Ensure the gasket behind the face plate creates a seal.
6. Install Lift and Turn Stopper: Insert the lift and turn stopper assembly into the drain shoe. Test its operation by lifting and turning to open and close the drain.
7. ചോർച്ചയ്ക്കുള്ള പരിശോധന: Fill the bathtub with water and allow it to sit for a period. Carefully inspect all connections from underneath the tub for any signs of leaks. If leaks are detected, tighten connections or reapply sealant as necessary.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The PROFLO PFWO355 features a simple lift and turn stopper mechanism for controlling water drainage.

• ഡ്രെയിൻ അടയ്ക്കാൻ: Push down on the stopper knob and turn it clockwise until it locks into the closed position. This will seal the drain, allowing the tub to fill with water.
• ഡ്രെയിൻ തുറക്കാൻ: Turn the stopper knob counter-clockwise until it unlocks, then lift the knob. This will open the drain, allowing water to flow out of the tub.

7. പരിപാലനം

Regular maintenance will help ensure the longevity and proper function of your PROFLO tub drain kit.

• വൃത്തിയാക്കൽ: Clean the visible chrome components regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbers, as these can damage the finish.
• Stopper Mechanism: Periodically remove the lift and turn stopper to clean any hair or debris that may accumulate around the drain opening. This helps prevent clogs and ensures smooth operation.
• ചോർച്ച പരിശോധനകൾ: Occasionally inspect the connections underneath the tub for any signs of leaks, especially after heavy use or if you notice a drop in water pressure.

8. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your tub drain kit.

If the issue persists after attempting these solutions, please contact PROFLO customer support or a qualified plumber.

9. വാറൻ്റിയും പിന്തുണയും

PROFLO products are manufactured to high-quality standards. For specific warranty information regarding your PFWO355 Tub Drain Kit, please refer to the warranty documentation included with your purchase or visit the official PROFLO webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

For technical assistance, replacement parts, or further inquiries, please contact PROFLO customer support:

• Webസൈറ്റ്: Visit the ProFlo Store on Amazon (പൊതു ഉൽപ്പന്ന വിവരങ്ങൾക്ക്)
• നിർമ്മാതാവ്: പ്രോഫ്ലോ
• ഓപ്ഷണൽ ആക്സസറികൾ: Test Kit: PFTK