ഫോസ്മോൺ HD8006 3-ഗാങ് 7.1 സറൗണ്ട് സൗണ്ട് ഡിസ്ട്രിബ്യൂഷൻ ഹോം തിയേറ്റർ വാൾ പ്ലേറ്റ് യൂസർ മാനുവൽ

ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fosmon HD8006 3-Gang 7.1 Surround Sound Distribution Home Theater Wall Plate. Please read this manual thoroughly before installation to ensure proper setup and optimal performance. Retain this manual for future reference.

സുരക്ഷാ വിവരങ്ങൾ

• Ensure power to the installation area is turned off before beginning any wiring to prevent electrical shock.
• ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
• Do not expose the wall plate to moisture or extreme temperatures.
• Use appropriate tools for installation. If unsure, consult a qualified electrician or installer.
• The subwoofer connection is an RCA connector on both the front and back side.
• The HDMI connection is an HDMI connector on both the front and back side.
• Banana jacks do not work with paired/dual banana plugs. Only single/individual banana plugs are compatible.

പാക്കേജ് ഉള്ളടക്കം

• 1 x Fosmon HD8006 3-Gang 7.1 Surround Sound Distribution Home Theater Wall Plate
• മൗണ്ടിംഗ് സ്ക്രൂകൾ

Note: Gang box/mounting bracket is not included and must be purchased separately.

ഉൽപ്പന്ന സവിശേഷതകൾ

• 7.1 Surround Sound Support: Provides connections for 7 speakers (Front Left, Front Right, Center, Side Left, Side Right, Rear Left, Rear Right) and 1 subwoofer.
• എച്ച്ഡിഎംഐ പോർട്ട്: Supports 4K@60Hz for high-resolution video signals.
• സ്വർണ്ണം പൂശിയ കണക്ടറുകൾ: Ensures improved signal quality and corrosion resistance for all banana binding posts, RCA jack, and HDMI port.
• 3-Gang Design: Fits standard 3-gang electrical boxes, offering a clean and organized installation.
• കുറഞ്ഞ കേബിൾ ക്ലട്ടർ: Allows for in-wall cable routing, providing a neat home theater setup.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of your Fosmon HD8006 wall plate. Ensure all power is disconnected before proceeding.

1. ഇൻസ്റ്റലേഷൻ ഏരിയ തയ്യാറാക്കുക.

• Turn off power to the circuit where you will be installing the wall plate.
• Install a standard 3-gang low-voltage mounting bracket or electrical box (not included) in your desired wall location. Ensure there is sufficient space behind the wall for cable routing.

Figure 1: The wall plate is compatible with a standard low-voltage 3-gang bracket (sold separately).

2. Route Cables

• Carefully route your speaker wires, subwoofer RCA cable, and HDMI cable through the wall to the opening of the mounting bracket. Leave enough slack for easy connection.

3. Connect Cables to the Wall Plate (Rear)

ചിത്രം 2: പിൻഭാഗം view of the wall plate with binding posts, RCA, and HDMI connections.

• സ്പീക്കർ വയറുകൾ: For each speaker, connect the positive (+) and negative (-) wires to the corresponding banana binding posts on the rear of the wall plate. Unscrew the binding post cap, insert the bare wire or spade connector, and tighten the cap. Ensure correct polarity (red for positive, black for negative) for each speaker channel (Front Left, Front Right, Center, Side Left, Side Right, Rear Left, Rear Right).
• Subwoofer RCA: Connect your subwoofer RCA cable to the RCA jack on the rear of the wall plate.
• HDMI കേബിൾ: Connect your HDMI cable to the HDMI port on the rear of the wall plate.

Figure 3: Speaker wires connected to the rear of the wall plate's binding posts.

4. Mount the Wall Plate

• Carefully push the connected wall plate into the mounting bracket/electrical box.
• Secure the wall plate to the mounting bracket using the provided screws. Do not overtighten.

Figure 4: The Fosmon HD8006 wall plate installed, showing front connections.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the Fosmon HD8006 wall plate is installed, you can connect your home theater components.

• സ്പീക്കർ കണക്ഷനുകൾ: Connect your speakers to the front banana binding posts using single banana plugs. Ensure each speaker is connected to its corresponding labeled post (e.g., Front Left speaker to "Front Left" post).
• സബ് വൂഫർ കണക്ഷൻ: Connect your subwoofer's RCA cable to the "Subwoofer" RCA jack on the front of the wall plate.
• HDMI കണക്ഷൻ: Connect your HDMI source device (e.g., Blu-ray player, gaming console) or display device (e.g., TV, projector) to the "HDMI" port on the front of the wall plate.

Figure 5: Banana plugs connected to the front of the wall plate for speaker connections.

Note: Always ensure proper polarity for speaker connections to maintain optimal audio performance.

മെയിൻ്റനൻസ്

• Keep the wall plate clean by wiping it with a soft, dry cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or connectors.
• എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Fosmon products typically come with a limited lifetime warranty. For warranty claims, technical support, or customer service inquiries, please visit the official Fosmon website or contact their customer support team. Please have your product model number (HD8006) and purchase information ready.

ഓൺലൈൻ പിന്തുണ: www.fosmon.com/support