Sealey RE006 6pc Suction Clamp ഉപയോക്തൃ മാനുവൽ സജ്ജമാക്കുക

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Sealey RE006 6pc Suction Clamp Set is designed to assist in automotive bodyshop tasks. This set provides a reliable method for securing various components such as panel trims, decals, badges, window trims, and sensors during preparation or while adhesives cure. The clamps feature a non-marking, composite construction and offer adjustable reach and clamping force, ensuring precise and damage-free application.

Figure 1: The Sealey RE006 6pc Suction Clamp സജ്ജമാക്കുക.

2 സുരക്ഷാ വിവരങ്ങൾ

Always observe the following safety precautions when using the Sealey RE006 Suction Clamp സജ്ജമാക്കുക:

• നിർദ്ദേശങ്ങൾ വായിക്കുക: Familiarize yourself with all instructions before use.
• വൃത്തിയുള്ള പ്രതലങ്ങൾ: Ensure surfaces where suction cups are applied are clean, dry, and free from dust, grease, or debris to ensure maximum suction.
• Cl പരിശോധിക്കുകamps: Before each use, inspect the suction cups and clamp mechanisms for any signs of damage or wear. Do not use damaged clamps.
• അമിതമായി മുറുകുന്നത് ഒഴിവാക്കുക: Apply appropriate clamping force. Excessive force may damage the clamped item or the clamp തന്നെ.
• താപനില പരിഗണനകൾ: Suction performance may be affected by extreme temperatures. Use in moderate conditions for best results.
• സുരക്ഷിത സ്ഥാനം: Ensure the suction cups are firmly attached before applying clampസമ്മർദ്ദം.
• സംഭരണം: സ്റ്റോർ clamps in a clean, dry place away from direct sunlight and extreme temperatures.

3. പാക്കേജ് ഉള്ളടക്കം

The Sealey RE006 6pc Suction Clamp Set includes the following items:

• 6 x Sealey RE006 Suction Clamps (Blue, composite construction)

4. സജ്ജീകരണം

The Sealey RE006 Suction Clamps are ready for use directly out of the package. No assembly is required. Prior to first use, and before each subsequent use, ensure the following:

1. സക്ഷൻ കപ്പുകൾ വൃത്തിയാക്കുക: Wipe the rubber suction cups with a clean, damp cloth to remove any dust or residue. Allow them to dry completely.
2. ഉപരിതലം തയ്യാറാക്കുക: cl ഉള്ള ഉപരിതലം ഉറപ്പാക്കുകamp will be applied is clean, dry, and smooth. Any dirt, oil, or texture can compromise suction.
3. Inspect the Mechanism: Check that the adjustable clamp mechanism operates smoothly and that all components are intact.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps to effectively use the Sealey RE006 Suction Clamps:

1. Cl സ്ഥാനം വയ്ക്കുകamp: Place the suction cup firmly against the clean, smooth surface of the vehicle panel or window.
2. സക്ഷൻ ഇടുക: Press down on the suction cup to expel air and create a vacuum seal. Ensure the cup is fully adhered.
3. Adjust Reach: Clamp features an adjustable arm. Position the arm to align with the item you wish to secure (e.g., trim, decal, badge).
4. Apply Clampശക്തി: Use the screw mechanism to gently tighten the clamp, applying sufficient pressure to hold the item in place without causing damage. The non-marking composite construction helps prevent scratches.
5. Monitor During Curing: If used for adhesive setting, periodically check the clamps to ensure they maintain suction and pressure throughout the curing period.
6. Cl റിലീസ് ചെയ്യുകamp: To remove, loosen the screw mechanism, then gently lift the edge of the suction cup to break the vacuum seal.

ചിത്രം 2: Clamps securing a trim on a car door.

ചിത്രം 3: Clamps used to hold a window trim in place.

6. പരിപാലനം

Proper maintenance ensures the longevity and optimal performance of your Sealey RE006 Suction Clamp സജ്ജമാക്കുക:

• വൃത്തിയാക്കൽ: After each use, wipe down the suction cups and clamp bodies with a clean, damp cloth to remove any adhesive residue, dust, or grime. Avoid harsh chemicals that could damage the composite material or rubber.
• ഉണക്കൽ: Ensure all parts are completely dry before storage to prevent degradation of materials.
• സംഭരണം: Cl സംഭരിക്കുകamps in their original packaging or a suitable storage container in a cool, dry place, away from direct sunlight and extreme temperatures. This helps preserve the integrity of the rubber suction cups.
• ലൂബ്രിക്കേഷൻ: Periodically apply a small amount of silicone-based lubricant to the screw threads of the clamping mechanism to ensure smooth operation.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, product support, or spare parts, please contact Sealey customer service directly or refer to the official Sealey webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Sealey Contact Information:

• Sealey Official Webസൈറ്റ്
• Refer to product packaging for specific contact details or regional support numbers.