1 സുരക്ഷാ വിവരങ്ങൾ
Please read and understand all instructions carefully before operating this device. Failure to do so may result in serious injury or damage to the unit.
- എല്ലായ്പ്പോഴും ഒരു ഗ്രൗണ്ടഡ് സർക്യൂട്ടിലേക്ക് ബന്ധിപ്പിക്കുക.
- പവർ കോർഡ് കേടായെങ്കിൽ പ്രവർത്തിപ്പിക്കരുത്.
- Use only water-based fog fluid recommended by ADJ Products. Other fluids may cause clogging or damage.
- യൂണിറ്റിന് ചുറ്റും മതിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
- Keep away from children and unauthorized personnel.
- Do not block the fog output nozzle.
- യൂണിറ്റ് വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The ADJ VF400 is a compact and portable 400-watt mobile fog machine designed for creating atmospheric effects in small venues, parties, and mobile DJ setups. It features a high-efficiency heater block and a wired remote for easy operation.

Figure 2.1: The ADJ VF400 fog machine, showing the main unit, wired remote, and included mounting bracket.

Figure 2.2: The compact size of the VF400, easily portable for various applications.
പ്രധാന സവിശേഷതകൾ:
- 400W mobile fog machine.
- Output: 3,000 cubic feet per minute.
- 0.25 liter internal fog fluid tank.
- Uses water-based fog fluid.
- Fluid level indicator for easy monitoring.
- Includes a wired remote (VF400R).
- Single yoke for mounting on a wall or truss.
3. സജ്ജീകരണം
Follow these steps to set up your ADJ VF400 fog machine for first use.
3.1 അൺപാക്കിംഗും പരിശോധനയും
Carefully remove the unit from its packaging. Inspect the unit for any damage that may have occurred during shipping. If damage is found, contact your dealer immediately.

Figure 3.1: The ADJ VF400 product packaging.
3.2 Fluid Tank Filling
- യൂണിറ്റിന് മുകളിൽ സ്ഥിതിചെയ്യുന്ന ദ്രാവക ടാങ്കിന്റെ തൊപ്പി അഴിക്കുക.
- Carefully pour ADJ-approved water-based fog fluid into the tank. Do not overfill.
- തൊപ്പി സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കുക.

ചിത്രം 3.2: പിൻഭാഗം view of the VF400, highlighting the fluid level indicator and the manual controller port.
3.3 റിമോട്ട് കണക്ഷൻ
Connect the included VF400R wired remote to the "MANUAL CONTROLLER" port on the rear of the fog machine.

Figure 3.3: All components included with the VF400, ready for assembly and use.
3.4 പവർ കണക്ഷൻ
പവർ കോർഡ് അനുയോജ്യമായ ഒരു ഗ്രൗണ്ടഡ് ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്യുക. വോള്യം ഉറപ്പാക്കുകtage matches the unit's requirements (AC120V 60Hz, 10A for US models).
3.5 മൗണ്ടിംഗ് (ഓപ്ഷണൽ)
The VF400 includes a single yoke for mounting. This allows the unit to be mounted on a wall or from a truss using appropriate clamps (ഉൾപ്പെടുത്തിയിട്ടില്ല).

Figure 3.4: The VF400 with its integrated handle and mounting yoke, ready for placement.
4. ഓപ്പറേഷൻ
Once the unit is set up, follow these steps to operate the fog machine.
- യൂണിറ്റിൽ സ്ഥിതിചെയ്യുന്ന പവർ സ്വിച്ച് ഓണാക്കുക.
- Allow the unit to warm up. The warm-up time is approximately 5 minutes. The red indicator light on the remote will turn green when the unit is ready to produce fog.
- Press and hold the button on the VF400R wired remote to emit fog. Release the button to stop fog production.
- Monitor the fluid level indicator on the back of the unit to ensure sufficient fog fluid.

Figure 4.1: The VF400 in operation, producing a steady stream of fog.
5. പരിപാലനം
Regular maintenance ensures the longevity and optimal performance of your VF400 fog machine.
5.1 Cleaning the Heater Element
After every 40 hours of continuous operation, or when the fog output appears weak, it is recommended to clean the heater element. Use a fog machine cleaning solution (available from ADJ Products) following the solution's instructions.
5.2 ബാഹ്യ ശുചീകരണം
Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
5.3 സംഭരണം
When storing the unit, ensure the fluid tank is empty. Store in a cool, dry place away from direct sunlight and extreme temperatures.
6. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with your VF400 fog machine.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No fog output / Unit not heating up |
|
|
| ദുർബലമായ അല്ലെങ്കിൽ പൊരുത്തമില്ലാത്ത ഫോഗ് ഔട്ട്പുട്ട് |
|
|
| Pump making noise but no fog |
|
|
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | VF400 |
| വൈദ്യുതി ഉപഭോഗം | 400W |
| മൂടൽമഞ്ഞ് put ട്ട്പുട്ട് | മിനിറ്റിൽ 3,000 ഘനയടി |
| സന്നാഹ സമയം | ഏകദേശം 5 മിനിറ്റ് |
| ഫ്ലൂയിഡ് ടാങ്ക് കപ്പാസിറ്റി | 0.25 ലിറ്റർ |
| ദ്രാവക തരം | Water-based fog fluid |
| റിമോട്ട് ഉൾപ്പെടുത്തിയിട്ടുണ്ട് | VF400R Wired Remote |
| അളവുകൾ (L x W x H) | 8 x 6 x 10 ഇഞ്ച് (203 x 152 x 254 മിമി) |
| ഭാരം | 5 പൗണ്ട് (2.27 കി.ഗ്രാം) |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| നിർമ്മാതാവ് | ADJ ഉൽപ്പന്നങ്ങൾ |
| മാതൃരാജ്യം | ചൈന |
8. വാറണ്ടിയും പിന്തുണയും
8.1 ലിമിറ്റഡ് വാറൻ്റി
ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period for your product). This warranty shall be valid only if the product is purchased within the United States, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
For complete warranty details, please refer to the official ADJ Products webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
8.2 ഉപഭോക്തൃ പിന്തുണ
For technical support, service, or to purchase replacement parts, please contact ADJ Products customer service. Our team is available to assist you with any questions or issues you may have.
ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:
- Webസൈറ്റ്: www.adj.com
- ഇമെയിൽ: support@adj.com
- ഫോൺ: (Generic support number, please refer to official web(നിലവിലെ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്ക് സൈറ്റ് സന്ദർശിക്കുക)





