ഗെയിൻ എക്സ്പ്രസ് OZX-300AT ഓസോൺ ജനറേറ്റർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the safe and effective operation and maintenance of your Gain Express OZX-300AT Ozone Generator. Please read this manual thoroughly before using the device to ensure proper function and to prevent potential hazards.

Image: The Gain Express OZX-300AT Ozone Generator unit with included diffuser stones.

ചിത്രം: കഴിഞ്ഞുview of the ozone generator's features, including adjustable output, digital timer, and maximum ozone output for various uses.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

WARNING: Ozone is a powerful oxidant and can be harmful if inhaled in high concentrations. Always ensure proper ventilation and avoid direct exposure to ozone during operation.

• Do not operate the device in occupied spaces. Ensure no humans or pets are present during ozone generation.
• Allow sufficient time for ozone to dissipate before re-entering treated areas.
• ഈ മാനുവലിൽ നിർദ്ദേശിച്ചിരിക്കുന്നതുപോലെ മാത്രം ഉപയോഗിക്കുക.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• ഉപകരണം വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
• Ensure the power supply matches the device's requirements.
• പ്രവർത്തന സമയത്ത് എയർ ഇൻലെറ്റുകളോ ഔട്ട്ലെറ്റുകളോ തടയരുത്.
• If using for water purification, ensure the ozone is diffused into water and not released into the air in high concentrations.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Gain Express OZX-300AT Ozone Generator Unit
• Air Dryer (with moisture-absorbing silica beads)
• 2 x Air Hoses (tubing)
• 2 x Ceramic Diffuser Stones
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

Image: The ozone generator unit, air dryer, two air hoses, and two ceramic diffuser stones.

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Gain Express OZX-300AT is an industrial-grade ozone generator designed for effective odor removal and water purification. It features adjustable ozone output and a programmable timer for precise control.

4.1. ഉപകരണ ഘടകങ്ങൾ

ചിത്രം: മുൻഭാഗം view of the ozone generator with key components labeled. These include the Power Switch, Display, Power Button, Up Button, Down Button, Ozone Inlet, Ozone Outlet, and O3 Output Adjust dial.

• വൈദ്യുതി സ്വിച്ച്: Main on/off switch for the device.
• ഡിസ്പ്ലേ: Digital screen showing the timer setting.
• പവർ ബട്ടൺ: Activates or deactivates ozone generation.
• അപ്പ്/ഡൗൺ ബട്ടണുകൾ: Adjust the timer setting.
• Ozone Inlet: Point where ambient air enters the device.
• Ozone Outlet: Point where generated ozone exits the device.
• O3 Output Adjust Dial: Rotary dial to regulate ozone output from 100% to less than 40%.

4.2. അളവുകളും ഭാരവും

Image: The device measures approximately 215mm (length) x 150mm (width) x 60mm (height) and weighs 800 grams.

5 സ്പെസിഫിക്കേഷനുകൾ

Image: Visual representation of the product specifications.

6. സജ്ജീകരണം

Follow these steps to set up your ozone generator:

1. പ്ലേസ്മെൻ്റ്: Place the ozone generator on a stable, flat surface in a well-ventilated area. Ensure it is away from direct sunlight, heat sources, and moisture.
2. Air Dryer Connection (Optional, for higher output):
   • Connect one end of an air hose to the Ozone Inlet on the device.
   • Connect the other end of this hose to one port of the Air Dryer.
   • Connect a second air hose to the other port of the Air Dryer.
   • Connect the free end of the second air hose to the Ozone Outlet on the device.
   • The air dryer contains silica beads that absorb moisture, enhancing ozone production up to 500 mg/hr.
   

   Image: The air dryer, containing moisture-absorbing silica beads, used to enhance ozone output.

3. Diffuser Stone Connection (for water treatment):
   • If using for water purification, connect an air hose to the Ozone Outlet.
   • Attach a ceramic diffuser stone to the free end of the air hose.
   • Place the diffuser stone into the water to be treated.
   

   Image: Two air hoses and two ceramic diffuser stones, showing their approximate dimensions.
4. പവർ കണക്ഷൻ: അനുയോജ്യമായ ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.

7. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The OZX-300AT offers both timed operation and a "Constant ON" function.

7.1. പവർ ഓൺ/ഓഫ്

1. ഉപകരണം ശരിയായി സജ്ജീകരിച്ചിട്ടുണ്ടെന്നും വൈദ്യുതിയുമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
2. Flip the main Power Switch (located on the side/rear of the unit) to the "ON" position. The display will illuminate.
3. To turn off the device, flip the main Power Switch to the "OFF" position.

Image: The red power switch, typically located on the side of the unit, controls the main power.

7.2. ടൈമർ സജ്ജീകരിക്കുന്നു

1. With the device powered on, press the "Power Button" (usually labeled "on/off" or similar) to activate the timer setting mode.
2. Use the "Up" and "Down" arrow buttons to select the desired operating time. Available intervals are 1, 3, 5, 10, 20, 30, 40, 50, 60, 70, 80, and 90 minutes.
3. Once the time is set, the device will begin ozone generation and count down. It will automatically shut off when the timer reaches zero.

7.3. Constant ON Function

To operate the device continuously:

1. With the device powered on, use the "Up" or "Down" buttons to cycle through the timer settings until "ON" or "CO" (Constant ON) is displayed.
2. The device will generate ozone continuously until manually turned off via the Power Button or the main Power Switch.
3. ജാഗ്രത: Use the Constant ON function with extreme care and only in applications where continuous ozone generation is safe and necessary, such as industrial water treatment with appropriate monitoring. Never use in occupied spaces.

7.4. Adjusting Ozone Output

1. Locate the "O3 Output Adjust" dial on the device.
2. Rotate the dial to increase or decrease the ozone output level. The dial allows regulation from 100% down to less than 40% of the maximum output.
3. Adjust the output based on the specific application and the volume of air or water being treated.

Image: The device indicates maximum ozone output levels and the adjustable output dial.

8. അപേക്ഷകൾ

The Gain Express OZX-300AT Ozone Generator is suitable for various applications:

• ജലശുദ്ധീകരണം: Use with diffuser stones to treat water in aquariums, fish ponds, or for general water treatment. The adjustable output allows for precise control, especially when used with a Redox (ORP) controller.
• ദുർഗന്ധം ഇല്ലാതാക്കൽ: Effectively removes odors in indoor environments, including homes and commercial spaces. This includes odors from smoke, pets, cooking, and general stale air.

Image: The ozone generator positioned near water with fruit, illustrating its use in water purification.

ചിത്രം: ഉദാamples of areas where the ozone generator can be used for odor elimination, such as bedrooms, new houses, kitchens, and living rooms.

9. പരിപാലനം

9.1. Air Dryer Maintenance

The air dryer contains moisture-absorbing silica beads. Over time, these beads will change color, indicating they have absorbed moisture and need to be recharged or replaced.

• റീചാർജ് ചെയ്യുന്നു: Refer to the air dryer's specific instructions for recharging the silica beads. Typically, this involves heating them in an oven at a low temperature until their original color is restored.
• മാറ്റിസ്ഥാപിക്കൽ: If recharging is not feasible or effective, replace the silica beads or the entire air dryer unit.

9.2 ജനറൽ ക്ലീനിംഗ്

• വൃത്തിയാക്കുന്നതിന് മുമ്പ് ഉപകരണം അൺപ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് യൂണിറ്റിന്റെ പുറംഭാഗം തുടയ്ക്കുക.
• ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• Keep the air inlet and outlet free from dust and obstructions.

10. പ്രശ്‌നപരിഹാരം

11. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact Gain Express customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Gain Express store for more information: Gain Express Store