എലിടെക് RC-5 USB ടെമ്പറേച്ചർ ഡാറ്റ ലോഗർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The Elitech RC-5 is a multi-use USB temperature data logger designed for precise temperature monitoring. It features a wide measuring range, high accuracy, and a large storage capacity of 32,000 recording points. With its built-in USB connector, data can be easily downloaded and reports generated without the need for additional cables or readers. The device is suitable for various applications requiring cold chain management, including the storage and transportation of sensitive products.

2. ബോക്സിൽ എന്താണുള്ളത്?

• 1 x Elitech RC-5 Data Logger
• 1 x CR2032 ബാറ്ററി
• 1 x ഉപയോക്തൃ മാനുവൽ

3. സജ്ജീകരണം

3.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Locate the battery compartment cover on the back of the data logger.
2. Use a coin or similar tool to gently twist and open the battery cover.
3. Insert the CR2032 battery with the positive (+) pole facing upwards, ensuring it slides under the small metal clip.
4. ബാറ്ററി കവർ മാറ്റി അത് ഉറപ്പിക്കാൻ വളച്ചൊടിക്കുക.

3.2. Software Installation and Parameter Configuration

Before using the data logger, install the Elitechlog software on your computer. The software allows you to configure logging parameters and retrieve data.

1. Download the Elitechlog software from the official Elitech webസൈറ്റ്.
2. ഓൺ-സ്ക്രീൻ നിർദ്ദേശങ്ങൾ പാലിച്ച് സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാൾ ചെയ്യുക.
3. Connect the RC-5 data logger to your computer's USB port.
4. Open the Elitechlog software and navigate to the 'Parameter' or 'Settings' tab.
5. Configure desired settings such as log interval (e.g., 10 seconds to 24 hours), temperature unit (Celsius/Fahrenheit), alarm limits, and start mode.
6. Click 'Save Parameter' to apply the settings to the data logger.
7. Safely eject and disconnect the data logger from the computer.

3.3. Video Guide: Setup and Parameter Configuration

Video 1: This video demonstrates the battery installation process, connecting the RC-5 data logger to a computer, and configuring logging parameters using the Elitechlog software.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. Starting Data Logging

After configuring parameters, you can start the data logger:

• Press and hold the left 'Play' button (triangle icon) on the data logger for more than 4 seconds.
• A triangle sign will firmly light up on the LCD screen, indicating that logging has started.

4.2. Cycling Through Display Modes

While logging, short press the 'Play' button to cycle through various display modes on the LCD screen:

• നിലവിലെ താപനില
• Logging Points (number of recorded data points)
• നിലവിലെ സമയം
• നിലവിലെ തീയതി
• Maximum Temperature recorded
• Minimum Temperature recorded

4.3. Stopping Data Logging

To stop data logging:

• Press and hold the right 'Pause' button (two vertical lines icon) on the data logger for more than 4 seconds.
• The logging indicator on the screen will disappear, confirming that logging has stopped.

5. ഡാറ്റ വീണ്ടെടുക്കൽ

The Elitech RC-5 allows for easy data retrieval and report generation in multiple formats.

1. Connect the RC-5 data logger to your computer's USB port.
2. The device will automatically generate a PDF report, which can be accessed directly from the device's storage.
3. For more detailed analysis, open the Elitechlog software.
4. In the software, click on 'Export Data' and choose your preferred format (Excel, PDF, TXT, etc.) to save the data to your computer.

5.1. Video Guide: Data Export

Video 2: This video provides a quick overview of the Elitech RC-5, including connecting it to a computer and exporting data.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The RC-5 uses a replaceable CR2032 battery, offering up to 6 months of battery life depending on usage and logging interval. Replace the battery when the low battery indicator appears on the LCD screen. Refer to section 3.1 for battery installation instructions.

6.2. വൃത്തിയാക്കലും പരിചരണവും

To ensure optimal performance and longevity of your data logger:

• Wipe clean the device with a soft, damp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഉപയോഗിക്കരുത്.
• The device is freezer safe and has an IP65 protection grade, meaning it is protected against dust and low-pressure water jets. However, avoid prolonged submersion in water.

7. പ്രശ്‌നപരിഹാരം

7.1. Software Not Recognizing Device

• Ensure the Elitechlog software is correctly installed. If issues persist, try reinstalling the software.
• Verify the data logger is securely plugged into a functional USB port.
• Try a different USB port or computer to rule out port-specific issues.

7.2. Logging Not Starting

• ബാറ്ററി ശരിയായി ഇൻസ്റ്റാൾ ചെയ്തിട്ടുണ്ടെന്നും മതിയായ ചാർജ് ഉണ്ടെന്നും ഉറപ്പാക്കുക.
• Confirm that the 'Start Mode' in the software parameters is set correctly (e.g., 'Start by button-press' or 'Timer start').
• Press and hold the 'Play' button for the required duration (more than 4 seconds) until the triangle indicator appears.

7.3. Inaccurate Temperature Readings

• Allow the device to stabilize in the environment for at least 30 minutes after handling or connecting to a computer, as these actions can temporarily affect its internal temperature.
• Ensure the device is not exposed to direct heat sources or extreme cold during measurement, unless that is the intended monitoring environment.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For any technical assistance or inquiries, Elitech offers 24/7 US Technician Support via Email and Phone. Please refer to the contact information provided in your product packaging or on the official Elitech webവിശദാംശങ്ങൾക്ക് സൈറ്റ്.

Calibration certificates are available upon request. Please email or message Elitech for assistance.