പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
വായിക്കുക മുഴുവനും instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Axial Machined Front Shock Tower is a precision-engineered component designed to enhance the performance and durability of your Yeti RC vehicle's front suspension. This part provides robust mounting points for the front shocks, contributing to improved handling and stability.
Image: The Axial Machined Front Shock Tower for Yeti, shown with included mounting hardware such as screws, nuts, and spacers.
ബോക്സിൽ എന്താണുള്ളത്:
- Machined Front Shock Tower Yeti
- Associated mounting hardware (screws, nuts, spacers)
ഇൻസ്റ്റലേഷൻ ഗൈഡ്
This section outlines the general steps for installing the Machined Front Shock Tower. Refer to your specific Axial Yeti vehicle's assembly manual for detailed diagrams and torque specifications.
- തയ്യാറാക്കൽ: Ensure your RC vehicle is powered off and the battery is disconnected. Place the vehicle on a stable, clean work surface.
- Remove Existing Shock Tower: Carefully remove the screws and fasteners securing the existing front shock tower to the chassis. Detach the front shocks from the tower. Keep all removed hardware organized.
- ഘടകങ്ങൾ പരിശോധിക്കുക: Before installation, inspect the new Axial Machined Front Shock Tower for any manufacturing defects. Ensure all included hardware matches the requirements for your vehicle.
- Mount Shocks to New Tower: Attach your front shocks to the new Machined Front Shock Tower using the appropriate screws and spacers. Ensure the shocks are oriented correctly and can move freely.
- Install New Shock Tower: Position the new shock tower onto the front chassis of your Yeti vehicle. Secure it using the provided or original mounting screws. Tighten screws evenly to prevent stress on the component. Do not overtighten.
- Re-attach Components: Reconnect any other components that were detached during the removal process, such as body mounts or steering linkages, if applicable.
- അന്തിമ പരിശോധന: Verify that all screws are securely fastened and that the front suspension components move smoothly without binding.
ഓപ്പറേഷൻ
The front shock tower is a critical structural component of your RC vehicle's suspension system. Once installed, it provides the upper mounting points for the front shock absorbers. Proper installation ensures that the shocks can articulate correctly, allowing the suspension to absorb impacts and maintain tire contact with the ground, which is essential for vehicle stability and control during off-road driving.
മെയിൻ്റനൻസ്
Regular maintenance of your shock tower and surrounding components will prolong their lifespan and ensure optimal performance.
- പരിശോധന: Periodically inspect the shock tower for any signs of damage, cracks, or bending, especially after heavy use or impacts.
- വൃത്തിയാക്കൽ: Clean the shock tower and surrounding areas regularly to remove dirt, dust, and debris that can accumulate and potentially interfere with shock movement or cause wear. Use a soft brush and compressed air, or a damp തുണി.
- ഫാസ്റ്റനർ പരിശോധന: Ensure all mounting screws and nuts remain tight. Vibrations during operation can cause fasteners to loosen over time.
- Shock Condition: While inspecting the tower, also check the condition of the shocks themselves, including their shafts, seals, and oil levels.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues related to the front shock tower, consider the following:
- Loose Shocks: If shocks feel loose or have excessive play at the mounting points, check and tighten the screws securing them to the shock tower.
- Bent or Damaged Tower: A bent or cracked shock tower can lead to improper shock alignment, poor handling, and premature wear on other suspension components. Replace a damaged tower immediately.
- അസാധാരണമായ ശബ്ദങ്ങൾ: Squeaking or grinding noises from the front suspension area might indicate loose fasteners, worn bushings, or interference between components. Inspect the shock tower and surrounding parts for contact points.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 4.13 x 2.63 x 0.25 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 0.64 ഔൺസ് |
| ASIN | B00NE0H646 |
| ഇനം മോഡൽ നമ്പർ | AXIC1170 |
| നിർമ്മാതാവ് ശുപാർശ ചെയ്യുന്ന പ്രായം | 14 വർഷവും അതിൽ കൂടുതലും |
| നിർമ്മാതാവ് | ഹൊറൈസൺ ഹോബി |
| ആദ്യ തീയതി ലഭ്യമാണ് | സെപ്റ്റംബർ 7, 2014 |
വാറൻ്റിയും പിന്തുണയും
For specific warranty information and technical support regarding your Axial Machined Front Shock Tower Yeti (AXIC1170), please refer to the official Axial or Horizon Hobby website, or contact their customer service directly. Keep your proof of purchase for any warranty claims.
നിർമ്മാതാവ്: ഹൊറൈസൺ ഹോബി
Webസൈറ്റ്: www.horizonhobby.com
