ആൽപൈൻ PWE-S8

Alpine PWE-S8 8-inch Compact Powered Subwoofer

ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The Alpine PWE-S8 is a compact, powered 8-inch subwoofer designed to enhance your vehicle's audio system with powerful and accurate bass. Its integrated amplifier and shallow-mount design allow for flexible installation in various vehicle types, including under or behind seats, in trunks, or in SUV hatches. This manual provides essential information for the proper installation, operation, and maintenance of your PWE-S8 subwoofer.

2 സുരക്ഷാ വിവരങ്ങൾ

  • ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect the vehicle's negative battery terminal before beginning any installation. Ensure all wiring is correctly connected and fused to prevent electrical shorts or damage.
  • വാഹന സുരക്ഷ: Mount the subwoofer securely to prevent it from becoming a projectile during sudden stops or collisions. Do not obstruct vehicle controls or safety devices.
  • ശ്രവണ സംരക്ഷണം: Prolonged exposure to high volume levels can cause permanent hearing damage. Adjust volume to a safe and comfortable level.
  • പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: If you are unsure about any part of the installation process, it is recommended to seek assistance from a qualified professional installer.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Alpine PWE-S8 Powered Subwoofer Unit
  • Wiring Harness (Power/Speaker Level Input)
  • Remote Bass Level Control Knob with Cable
  • Mounting Hardware (Brackets, Screws)
  • ഉടമയുടെ മാനുവൽ (ഈ പ്രമാണം)

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The PWE-S8 features a durable cast aluminum enclosure housing an 8-inch subwoofer and a built-in Class D amplifier. Its compact dimensions allow for versatile placement within your vehicle.

Alpine PWE-S8 Compact Powered Subwoofer, front view

ചിത്രം 4.1: മുൻഭാഗം view of the Alpine PWE-S8 subwoofer, showcasing its compact design and protective grille.

Alpine PWE-S8 Compact Powered Subwoofer with dimensions

Figure 4.2: Alpine PWE-S8 subwoofer with approximate dimensions (15 inches / 37 cm in length shown for reference).

4.1 പിൻ പാനൽ നിയന്ത്രണങ്ങളും കണക്ഷനുകളും

The rear panel provides all necessary connections and adjustment controls for integrating the subwoofer into your audio system.

Alpine PWE-S8 Rear Panel Controls and Connections

ചിത്രം 4.3: വിശദമായി view of the PWE-S8 rear panel, showing input and control options.

  • ഘട്ട സ്വിച്ച്: Adjusts the phase of the subwoofer output (0° or 180°).
  • നിയന്ത്രണം നേടുക: Matches the input sensitivity of the subwoofer to the output of your head unit.
  • LP CROSSOVER Control: Sets the low-pass filter frequency (typically 50Hz-150Hz).
  • REMOTE SUB LEVEL Input: Connects the wired remote bass level control.
  • RCA ഇൻപുട്ടുകൾ: For connecting to head units with RCA pre-outs.
  • SPEAKER LEVEL INPUTS: For connecting to head units without RCA pre-outs, using speaker wires.
  • POWER/GROUND/REMOTE Terminal: For main power, ground, and remote turn-on connections.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Careful installation is crucial for optimal performance and safety. Plan your wiring and mounting location before beginning.

5.1 മ ing ണ്ടിംഗ് സ്ഥാനം

The compact design of the PWE-S8 allows for flexible mounting:

  • Under a seat (ensure adequate clearance and ventilation).
  • Behind a seat (in trucks or SUVs).
  • In the trunk of a sedan.
  • In the hatch area of an SUV.

Ensure the chosen location is dry, well-ventilated, and does not interfere with vehicle operation or passenger safety. Secure the unit using the provided mounting hardware.

5.2 വയറിംഗ് കണക്ഷനുകൾ

Follow these general guidelines for wiring. Refer to the detailed wiring diagram in the full owner's manual for specific connections.

  1. പവർ (BATT+): Connect the main power wire directly to the vehicle's positive battery terminal. Use an appropriate gauge wire and install a fuse (not supplied, typically 15A-20A) within 18 inches of the battery.
  2. ഗ്രൗണ്ട് (GND): വാഹന ചേസിസിന്റെ വൃത്തിയുള്ളതും പെയിന്റ് ചെയ്യാത്തതുമായ ഒരു ലോഹ പ്രതലത്തിലേക്ക് ഗ്രൗണ്ട് വയർ ബന്ധിപ്പിക്കുക. ശക്തമായ ഒരു വൈദ്യുത കണക്ഷൻ ഉറപ്പാക്കുക.
  3. റിമോട്ട് ടേൺ-ഓൺ (REM): Connect this wire to the remote turn-on output of your head unit. This signal turns the subwoofer on and off with your audio system. If your head unit lacks a remote output, some units can use speaker-level input sensing for automatic turn-on.
  4. ഓഡിയോ ഇൻപുട്ട്:
    • RCA ഇൻപുട്ട്: Connect RCA cables from your head unit's subwoofer pre-out or full-range pre-outs to the RCA INPUTS on the PWE-S8.
    • സ്പീക്കർ ലെവൽ ഇൻപുട്ട്: If using speaker-level inputs, connect the vehicle's speaker wires (front or rear) to the SPEAKER LEVEL INPUTS on the PWE-S8 wiring harness.
  5. റിമോട്ട് ബാസ് ലെവൽ നിയന്ത്രണം: Connect the provided remote control cable to the REMOTE SUB LEVEL input on the PWE-S8. Mount the control knob in an accessible location for easy adjustment.

6. പ്രവർത്തനവും ക്രമീകരണങ്ങളും

Once installed, fine-tune the subwoofer's settings for optimal sound integration with your vehicle's audio system.

  • നിയന്ത്രണം നേടുക: Start with the gain control at its minimum setting. Play music with strong bass and slowly increase the gain until the subwoofer output blends smoothly with your main speakers without distortion. Avoid setting the gain too high, as this can cause clipping and damage.
  • LP CROSSOVER Control: Adjust this control to set the upper frequency limit for the subwoofer. A common starting point is between 80Hz and 100Hz. Experiment to find the setting that provides the best blend with your main speakers, ensuring bass notes are localized to the front of the vehicle rather than the subwoofer's location.
  • ഘട്ട സ്വിച്ച്: Listen to music with strong bass. Toggle the phase switch between 0° and 180°. Choose the setting that produces the loudest and most impactful bass response. This corrects any phase cancellation issues between the subwoofer and main speakers.
  • റിമോട്ട് ബാസ് ലെവൽ നിയന്ത്രണം: Use this knob to conveniently adjust the subwoofer's output level from your driving position, allowing for on-the-fly adjustments based on music genre or personal preference.

7. പരിപാലനം

The Alpine PWE-S8 requires minimal maintenance to ensure long-lasting performance.

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to wipe the exterior of the unit. Do not use harsh chemicals or abrasive cleaners.
  • വെൻ്റിലേഷൻ: Ensure that the subwoofer's heat sinks and ventilation areas are not obstructed to prevent overheating.
  • കണക്ഷനുകൾ: എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും തുരുമ്പെടുക്കലിൽ നിന്ന് മുക്തമാണെന്നും ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.

8. പ്രശ്‌നപരിഹാരം

If you experience issues with your PWE-S8, consult the following table before seeking professional service.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No power/No indicator lightBlown fuse; Loose power/ground connection; No remote turn-on signal.Check and replace fuse; Verify all power and ground connections; Check remote turn-on wire from head unit.
സബ് വൂഫറിൽ നിന്ന് ശബ്ദമില്ലNo audio input signal; Gain set too low; Head unit settings incorrect.Verify RCA or speaker level input connections; Increase gain control; Check head unit's subwoofer output or balance settings.
വികലമായ ശബ്ദംGain set too high; Input signal too strong; Damaged speaker.Reduce gain control; Check head unit's output level; If distortion persists at low gain, speaker may be damaged (contact support).
Weak or unclear bassPhase incorrect; LP Crossover set too low; Subwoofer not properly blended.Toggle PHASE switch; Adjust LP CROSSOVER frequency higher; Re-adjust GAIN for proper blend.

9 സ്പെസിഫിക്കേഷനുകൾ

Technical specifications for the Alpine PWE-S8 powered subwoofer:

  • RMS പവർ: 120 വാട്ട്സ്
  • പീക്ക് പവർ: 240 വാട്ട്സ്
  • സബ് വൂഫർ വലുപ്പം: 8 ഇഞ്ച്
  • ഫ്രീക്വൻസി പ്രതികരണം: 32 ഹെർട്സ് - 150 ഹെർട്സ്
  • Ampജീവിത തരം: ക്ലാസ് ഡി
  • എൻക്ലോഷർ മെറ്റീരിയൽ: കാസ്റ്റ് അലുമിനിയം
  • അളവുകൾ (ഏകദേശം): 13.5" (L) x 9" (W) x 3" (D)
  • ഇൻപുട്ട് സെൻസിറ്റിവിറ്റി: RCA (0.1V - 4.0V), Speaker Level (0.5V - 10V)
  • ലോ-പാസ് ക്രോസ്ഓവർ: 50 Hz - 150 Hz (variable)
  • ഘട്ടം നിയന്ത്രണം: 0° / 180° (selectable)
  • കണക്റ്റിവിറ്റി: RCA, Speaker Level
  • ഇനത്തിൻ്റെ ഭാരം: 11 പൗണ്ട്

10. വാറൻ്റിയും പിന്തുണയും

Alpine products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Alpine webസൈറ്റ്.

For technical support, product registration, or to locate an authorized service center, please visit the official Alpine USA website or contact Alpine customer service directly. Contact information can typically be found on the Alpine webസൈറ്റിലോ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിലോ.

അനുബന്ധ രേഖകൾ - PWE-S8

പ്രീview ജീപ്പ് റാങ്ലർ അൺലിമിറ്റഡിനുള്ള (2011-UP) ആൽപൈൻ PWE-S8-WRA കോംപാക്റ്റ് സബ് വൂഫർ ഇൻസ്റ്റലേഷൻ മാനുവൽ
2011-UP ജീപ്പ് റാങ്‌ലർ അൺലിമിറ്റഡിനായി രൂപകൽപ്പന ചെയ്‌ത ആൽപൈൻ PWE-S8-WRA 8 ഇഞ്ച് കോം‌പാക്റ്റ് പവർഡ് സബ്‌വൂഫർ സിസ്റ്റത്തിനായുള്ള വിശദമായ ഇൻസ്റ്റാളേഷൻ ഗൈഡ്. ഉപകരണങ്ങൾ, ആക്‌സസറികൾ, ഡിസ്അസംബ്ലിംഗ്, ഇൻസ്റ്റാളേഷൻ, വയറിംഗ് നിർദ്ദേശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview Alpine PSS-23WRA Sound System Installation Manual for Jeep Wrangler Unlimited JL
Step-by-step installation guide for the Alpine PSS-23WRA Sound System in a 2018-up Jeep Wrangler Unlimited JL. Includes tools required, accessory list, removal and installation procedures, wiring diagrams, and troubleshooting. Covers safety precautions and warranty information.
പ്രീview ജീപ്പ് റാംഗ്ലറിനും ഗ്ലാഡിയേറ്ററിനുമുള്ള ആൽപൈൻ PSS-24WRA ഇൻസ്റ്റലേഷൻ മാനുവൽ
2018-അപ്പ് ജീപ്പ് റാങ്‌ലർ ജെഎൽ, 2020-അപ്പ് ജീപ്പ് ഗ്ലാഡിയേറ്റർ ജെടി വാഹനങ്ങളിലെ ആൽപൈൻ പിഎസ്എസ്-24ഡബ്ല്യുആർഎ റീസ്റ്റൈൽ സിസ്റ്റത്തിനായുള്ള സമഗ്രമായ ഇൻസ്റ്റാളേഷൻ ഗൈഡ്. ഉപകരണങ്ങൾ, ആക്‌സസറികൾ, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ്, വയറിംഗ് ഡയഗ്രമുകൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview Alpine PSU-300CMY Sound System Upgrade Installation Manual for 2018-Up Toyota Camry
This document provides a comprehensive installation manual for the Alpine PSU-300CMY sound system upgrade designed for the 2018-Up Toyota Camry. It includes detailed steps for factory equipment removal, product installation, wiring diagrams for various head unit types (OEM, Aftermarket, Alpine Restyle), a list of required tools and accessories, and a troubleshooting guide. Safety precautions and warranty information are also provided.
പ്രീview ആൽപൈൻ SWR-12D4 സബ്‌വൂഫർ ഉപയോക്തൃ മാനുവലും ഇൻസ്റ്റലേഷൻ ഗൈഡും
ആൽപൈൻ SWR-12D4 12-ഇഞ്ച് കാർ ഓഡിയോ സബ് വൂഫറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലും ഇൻസ്റ്റാളേഷൻ ഗൈഡും. വിശദമായ സ്പെസിഫിക്കേഷനുകൾ, സുരക്ഷാ മുൻകരുതലുകൾ, ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ എന്നിവ സവിശേഷതകളിൽ ഉൾപ്പെടുന്നു.
പ്രീview ആൽപൈൻ എസ്2-സീരീസ് സബ്‌വൂഫർ ആപ്ലിക്കേഷൻ ഗൈഡും സ്പെസിഫിക്കേഷനുകളും
S2-W8D2, S2-W8D4, S2-W10D2, S2-W10D4, S2-W12D2, S2-W12D4 എന്നീ മോഡലുകൾ ഉൾപ്പെടെ ആൽപൈൻ S2-സീരീസ് സബ്‌വൂഫറുകൾക്കായുള്ള സമഗ്രമായ ആപ്ലിക്കേഷൻ ഗൈഡ്, സാങ്കേതിക സവിശേഷതകൾ, എൻക്ലോഷർ ശുപാർശകൾ, ഇൻസ്റ്റാളേഷൻ കുറിപ്പുകൾ. വിശദമായ ഘടക വിവരണങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.