1. ആമുഖം
This manual provides essential information for the safe and effective use of your VIVOSUN 400 Watt High Pressure Sodium (HPS) Grow Light Bulb. Please read these instructions thoroughly before installation and operation to ensure proper function and longevity of the product.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect power before installing, removing, or handling the bulb. Ensure all electrical connections are secure and comply with local electrical codes.
- ചൂട് മുന്നറിയിപ്പ്: HPS bulbs generate significant heat. Do not touch the bulb with bare hands during or immediately after operation. Allow sufficient cooling time. Ensure adequate ventilation around the fixture.
- നേത്ര സംരക്ഷണം: The intense light emitted by HPS bulbs can be harmful to eyes. Always wear appropriate eye protection when working near an operating HPS light.
- ശരിയായ കൈകാര്യം ചെയ്യൽ: Handle the bulb by its base, not the glass. Avoid dropping or subjecting the bulb to impact.
- അനുയോജ്യത: Use only with compatible 400W electronic or magnetic ballasts. Using an incompatible ballast can damage the bulb and pose a safety risk.
- നീക്കം ചെയ്യൽ: ഉപയോഗിച്ച ബൾബുകൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് നശിപ്പിക്കുക, കാരണം അവയിൽ അപകടകരമായ വസ്തുക്കൾ അടങ്ങിയിരിക്കാം.
3. ഉൽപ്പന്ന സവിശേഷതകൾ
- വാട്ട്tage: 400W HPS bulb compatible with electronic and magnetic ballasts.
- ല്യൂമെൻ ഔട്ട്പുട്ട്: 55,000 Lumens for high brightness.
- വർണ്ണ താപനില: Optimized 2100K red & orange spectrum.
- PAR Value: High Photosynthetic Active Radiation (PAR) to stimulate flower growth and enhance fruiting.
- അടിസ്ഥാന തരം: E39 അടിസ്ഥാനം.
- ല്യൂമെൻ മെയിൻ്റനൻസ്: Maintains over 90% of initial lumen output after 5,000 hours of operation.
- ജീവിതകാലയളവ്: Rated for 24,000 hours.
4. സജ്ജീകരണം
4.1 അൺപാക്ക് ചെയ്യുന്നു
Carefully remove the bulb from its packaging. Inspect for any visible damage. Do not use if the bulb appears cracked or broken.
4.2. ഇൻസ്റ്റലേഷൻ
- Ensure the power to the grow light fixture is turned off at the main switch.
- Handle the bulb by its ceramic base, avoiding contact with the glass envelope.
- Screw the E39 base of the HPS bulb into the compatible socket of your grow light reflector. Ensure it is securely tightened but do not overtighten.
- Verify that the bulb is properly seated in the socket.
- Connect the grow light fixture to a compatible 400W electronic or magnetic ballast.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 പ്രാരംഭ സ്റ്റാർട്ടപ്പ്
After installation, turn on the power. The bulb requires approximately 2-3 minutes to reach full brightness. During this warm-up period, the light intensity and color may fluctuate.
5.2. Re-strike Time
If the bulb is turned off, allow at least 5 minutes before attempting to re-strike it. Attempting to re-strike a hot HPS bulb too quickly can reduce its lifespan or prevent it from igniting.
5.3. Light Spectrum
The VIVOSUN 400W HPS bulb produces a red and orange spectrum light, which is ideal for stimulating flowering and fruiting stagസസ്യവളർച്ചയുടെ es.
6. പരിപാലനം
6.1. വൃത്തിയാക്കൽ
Ensure the bulb is cool and power is disconnected before cleaning. Gently wipe the glass envelope with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or liquids directly on the bulb.
6.2. Lumen Depreciation
Over time, all HPS bulbs experience a gradual decrease in light output (lumen depreciation). This VIVOSUN bulb is designed to maintain over 90% of its initial lumen output after 5,000 hours of operation. For optimal plant growth, consider replacing the bulb after approximately 12-18 months of continuous use, even if it still lights up.
6.3. എൽamp മരണനിരക്ക്
The bulb has a rated lifetime of 24,000 hours. While designed for durability, factors such as frequent on/off cycles, improper voltage, or physical shock can affect its lifespan.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ബൾബ് പ്രകാശിക്കുന്നില്ല | No power, incorrect wiring, faulty ballast, loose connection, damaged bulb. | Check power supply. Verify all wiring and connections. Ensure ballast is compatible and functional. Re-seat the bulb. Replace bulb if damaged. |
| Bulb flickers or cycles on/off | Aging bulb, improper voltage, faulty ballast, overheating. | Replace bulb if it's near end of life. Check voltage supply. Inspect ballast. Ensure adequate ventilation to prevent overheating. |
| കുറഞ്ഞ പ്രകാശ ഔട്ട്പുട്ട് | Lumen depreciation (normal aging), dirty bulb, incorrect ballast. | Clean bulb surface. Consider replacing bulb if it has exceeded its optimal operational hours. Verify ballast compatibility. |
| Bulb takes too long to start | Aging bulb, low voltage, faulty ignitor in ballast. | Replace bulb. Check power supply. Consult ballast manual for ignitor issues. |
8 സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | വിവോസുൻ |
| ലൈറ്റ് തരം | HPS (High Pressure Sodium) |
| വാട്ട്tage | 400 വാട്ട്സ് |
| ബൾബ് ബേസ് | E39 |
| ഇളം നിറം | Red, Orange (2100K CCT) |
| തെളിച്ചം | 55,000 ല്യൂമെൻസ് |
| റേറ്റുചെയ്ത ആജീവനാന്തം | 24,000 മണിക്കൂർ |
| ലുമൺ മെയിൻ്റനൻസ് | Over 90% after 5,000 hours |
| ആരംഭ സമയം | 2-3 minutes for full bright |
| Re-strike Time | At least 5 minutes after power off |
| ഉൽപ്പന്ന അളവുകൾ | 12 x 3 x 3 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 6.7 ഔൺസ് |
| ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം | ഇൻഡോർ |
9. ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോ
10. വാറൻ്റിയും പിന്തുണയും
VIVOSUN products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official VIVOSUN website or contact VIVOSUN customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
