Technotrade WS 1050

Technoline WS 1050 Wireless BBQ Thermometer User Manual

മോഡൽ: WS 1050

ആമുഖം

This manual provides instructions for the proper setup, operation, and maintenance of your Technoline WS 1050 Wireless BBQ Thermometer. Please read this manual thoroughly before using the device to ensure safe and efficient operation.

ഉൽപ്പന്ന സവിശേഷതകൾ

  • Wireless BBQ thermometer with backlight.
  • Selectable settings for 8 types of meat and 5 taste levels.
  • Temperature alert function for current and target meat temperatures.
  • Countdown/count-up timer function.
  • Temperature display in °C/°F.

പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഘടകങ്ങളും ലഭ്യമാണോ എന്ന് ദയവായി പരിശോധിക്കുക:

  • 1x Technoline WS 1050 Wireless BBQ Thermometer (Transmitter and Receiver unit)
  • 1x Meat Probe
  • ഉപയോക്തൃ മാനുവൽ
  • Batteries (AAA batteries required, not always included)

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Locate the battery compartments on both the transmitter and receiver units. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the battery covers securely.

2. പ്രോബ് കണക്ഷൻ

Connect the meat probe cable to the designated port on the transmitter unit. Ensure a firm connection.

Technoline WS 1050 transmitter unit with probe connected, displaying 'WELL' and temperature readings.

Image: The Technoline WS 1050 transmitter unit with the meat probe connected, showing the display with 'WELL' and temperature readings. The unit is placed on its stand next to an oven.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

Press the power button on both the transmitter and receiver units to turn them on. The units should automatically pair. If not, refer to the troubleshooting section.

2. Selecting Meat Type and Taste Level

  • അമർത്തുക മാംസം button to cycle through the 8 available meat types (e.g., Beef, Lamb, Pork, Chicken).
  • അമർത്തുക രുചി button to select the desired doneness level (e.g., Rare, Medium Rare, Medium, Well Done).
Technoline WS 1050 receiver unit held in hand, showing 'WELL' and temperature readings, with an oven in the background.

Image: A hand holding the Technoline WS 1050 receiver unit, displaying 'WELL' and temperature readings. The meat probe is visible inside an oven in the background.

3. താപനില നിരീക്ഷണം

Insert the meat probe into the thickest part of the meat, avoiding bone or gristle. The current internal temperature will be displayed on both units. The target temperature is automatically set based on your meat type and taste level selection.

4. താപനില മുന്നറിയിപ്പ്

When the meat reaches the target temperature, the receiver unit will emit an audible alarm and/or visual alert. Remove the meat from the heat source immediately.

5. ടൈമർ ഫംഗ്ഷൻ

The device includes a countdown/count-up timer. Use the MIN ഒപ്പം എസ്.ഇ.സി buttons to set the desired time for the countdown timer. Press ആരംഭിക്കുക/നിർത്തുക to begin or pause. Press ക്ലിയർ ടൈമർ പുനഃസജ്ജമാക്കാൻ.

Technoline WS 1050 thermometer with blue backlight, showing 'MEDIUM' and temperature readings.

Image: The Technoline WS 1050 thermometer displaying 'MEDIUM' with a blue backlight, showing current and target temperatures, and a timer.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

  • Always clean the meat probe thoroughly after each use with warm, soapy water. Rinse and dry completely.
  • Do not immerse the transmitter or receiver units in water. Wipe them clean with a damp തുണി.
  • Avoid using abrasive cleaners or scouring pads, as these can damage the device.

സംഭരണം

Store the thermometer and probe in a clean, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഒരു ഡിസ്പ്ലേയും/ഉപകരണവും ഓണാകുന്നില്ല.ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ചേർത്ത ബാറ്ററികൾ.ബാറ്ററികൾ പുതിയ AAA ബാറ്ററികൾ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക.
No temperature reading/ "--" displayedProbe not properly connected or damaged. Transmitter and receiver not paired.Ensure probe is firmly connected. Check for visible damage to the probe. Power cycle both units to re-establish connection. If problem persists, probe may need replacement.
കൃത്യമല്ലാത്ത താപനില റീഡിംഗുകൾProbe not inserted correctly into meat. Probe damaged.Re-insert probe into the thickest part of the meat, away from bone. Test probe in boiling water (should read 100°C/212°F) or ice water (should read 0°C/32°F) to check accuracy.
വയർലെസ് കണക്ഷനില്ലUnits too far apart or obstructions. Low batteries.Move receiver closer to the transmitter. Ensure no large metal objects are blocking the signal. Replace batteries in both units.

സ്പെസിഫിക്കേഷനുകൾ

  • മോഡൽ: ടെക്നോലൈൻ WS 1050
  • ഡിസ്പ്ലേ തരം: ബാക്ക്ലൈറ്റുള്ള എൽസിഡി
  • കണക്റ്റിവിറ്റി: വയർലെസ്
  • ശക്തി: AAA batteries (quantity not specified, typically 2-4)
  • അളവുകൾ: ഏകദേശം 7.5 x 5.5 x 13 സെ.മീ
  • ഭാരം: ഏകദേശം 33 ഗ്രാം
  • താപനില യൂണിറ്റുകൾ: °C / °F selectable
  • ഫീച്ചറുകൾ: 8 meat types, 5 taste levels, temperature alert, countdown/count-up timer.

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact your retailer or the manufacturer, Technotrade. Keep your proof of purchase for warranty claims.

Manufacturer: Technotrade

Model Number: WS 1050

അനുബന്ധ രേഖകൾ - WS1050

പ്രീview WT549 Bedienungsanleitung: Wetterstation mit പ്രൊജക്ഷൻ ആൻഡ് Uhr
Umfassende Bedienungsanleitung für die Technotrade WT549 Wetterstation. Erfahren Sie, Wie Sie die Funktionen wie Zeit, Datum, Temperaturanzeige, Wettervorhersage und Projektion einrichten und nutzen. Enthält technische Daten und Sicherheitshinweise.
പ്രീview WS 9003 പൂൾ, വിൻഡോ തെർമോമീറ്റർ ഉപയോക്തൃ മാനുവൽ
ടെക്നോലൈൻ WS 9003 പൂളിനും വിൻഡോ തെർമോമീറ്ററിനുമുള്ള ഉപയോക്തൃ മാനുവലിൽ സാങ്കേതിക ഡാറ്റ, മാനുവൽ സമയം സജ്ജീകരിക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ, ജല താപനില അലാറം പ്രവർത്തനം, ബാറ്ററി ഡിസ്പോസൽ വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview ട്രാസ്ക് ബിച്ചിൻ ബോൾട്ട് ടൈറ്റാനിയം ബോൾട്ട് കിറ്റുകൾ: M8 മോഡലുകൾക്കുള്ള ടോർക്ക് സ്പെസിഫിക്കേഷനുകളും പാർട്സ് ലിസ്റ്റുകളും.
M8 മോട്ടോർസൈക്കിൾ എഞ്ചിനുകൾക്കായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന ട്രാസ്ക് ബിച്ചിൻ ബോൾട്ട്സ് ടൈറ്റാനിയം ബോൾട്ട് കിറ്റുകളുടെ സമഗ്രമായ ടോർക്ക് സ്പെസിഫിക്കേഷനുകളും പാർട്‌സ് ലിസ്റ്റുകളും, ഡെർബി കവറുകൾ, ലിഫ്റ്റർ ബ്ലോക്കുകൾ, ക്യാം കവറുകൾ തുടങ്ങിയ വിവിധ ഘടകങ്ങൾ ഉൾക്കൊള്ളുന്നു.
പ്രീview WS 9118 വയർലെസ് ഇൻഡോർ, ഔട്ട്ഡോർ തെർമോമീറ്റർ-ക്ലോക്ക് ഇൻസ്ട്രക്ഷൻ മാനുവൽ
WS 9118 വയർലെസ് ഇൻഡോർ, ഔട്ട്‌ഡോർ തെർമോമീറ്റർ-ക്ലോക്കിനായുള്ള സമഗ്രമായ നിർദ്ദേശ മാനുവൽ. താപനില ഡിസ്പ്ലേ, അലാറം ഫംഗ്ഷനുകൾ, സെൻസർ സിൻക്രൊണൈസേഷൻ എന്നിവയുൾപ്പെടെ നിങ്ങളുടെ ഉപകരണം എങ്ങനെ സജ്ജീകരിക്കാമെന്നും പ്രവർത്തിപ്പിക്കാമെന്നും ട്രബിൾഷൂട്ട് ചെയ്യാമെന്നും അറിയുക.
പ്രീview WS 7009 Thermo-Hygrometer User Manual
Official user manual for the WS 7009 Thermo-Hygrometer, providing instructions on setup, operation, specifications, and safety guidelines.
പ്രീview 433 MHz റിമോട്ട് തെർമോ യൂസർ മാനുവലും സജ്ജീകരണ ഗൈഡും
433 MHz റിമോട്ട് തെർമോ സജ്ജീകരിക്കുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്, സവിശേഷതകൾ, താപനില റീഡിംഗുകൾ, DCF-77 സമയ സ്വീകരണം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾപ്പെടുന്നു. ഇൻസ്റ്റാളേഷൻ, പരിപാലനം, സ്പെസിഫിക്കേഷനുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.