1. ആമുഖം
Welcome to the user manual for the Pronomic PT-6 MKII Projector and Beamer Cart. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cart. Please read this manual thoroughly before use and retain it for future reference.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും സുരക്ഷിതമായി ഉറപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Do not exceed the maximum load capacity of 10 kg (22 lbs) per shelf.
- Use caution when adjusting height and tilt to prevent pinching.
- Engage wheel brakes when the cart needs to remain stationary.
- Keep away from children and pets during assembly and operation.
- Do not use the cart on uneven or unstable surfaces.
3. പാക്കേജ് ഉള്ളടക്കം
Verify that all parts are present before beginning assembly.
- Main vertical pole
- Base with 4 casters (2 with brakes)
- Upper shelf (approx. 30 x 35 cm)
- Lower shelf (approx. 35 x 40 cm)
- Mounting hardware (screws, knobs, etc.)
- അസംബ്ലി നിർദ്ദേശങ്ങൾ
Image: All components of the Pronomic PT-6 MKII Projector Cart laid out, showing the main pole, base with wheels, and two adjustable shelves.
4. സജ്ജീകരണവും അസംബ്ലിയും
Follow these steps for proper assembly. It is recommended to have a clear, flat workspace.
അടിസ്ഥാനം അറ്റാച്ചുചെയ്യുക: Connect the main vertical pole to the base with the four casters. Ensure the locking mechanism is secure.
Image: The base of the cart with four wheels attached to the main vertical pole.
ഷെൽഫുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Attach the two shelves to the main pole using the provided mounting hardware. The shelves are independently adjustable for height and tilt.
Image: The two shelves mounted on the main pole, showing their relative positions.
Secure Adjustments: Tighten all knobs and fasteners to ensure stability. The smaller shelf can rotate 360 degrees, and both shelves can tilt +/- 35 degrees.
ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the black adjustment knob used to secure the shelf's tilt and height.
സ്ഥിരത പരിശോധിക്കുക: Before placing any equipment, gently test the cart's stability and ensure all wheels roll freely and brakes engage correctly.
ചിത്രം: മുൻഭാഗം view of the assembled Pronomic PT-6 MKII cart, showing both shelves and the base with wheels.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Pronomic PT-6 MKII is designed for versatile use with projectors, laptops, and other equipment.
ഉയരം ക്രമീകരിക്കൽ
The cart's height can be adjusted steplessly from 70 cm to 110 cm (27.5 to 43.3 inches). Loosen the height adjustment knob on the main pole, set to the desired height, and re-tighten securely.
Shelf Tilt Adjustment
Both shelves can be tilted +/- 35 degrees. Loosen the tilt adjustment knobs located beneath each shelf, adjust the angle, and then firmly re-tighten the knobs.
Shelf Rotation
The smaller upper shelf can be rotated 360 degrees independently. This allows for optimal positioning of a projector or laptop.
Mobility and Braking
The cart is equipped with four smooth-rolling casters. Two of these casters have brakes. To move the cart, ensure brakes are disengaged. To secure the cart in place, press down on the brake levers on the two braked casters until they click into position.
Image: Technical drawing of the Pronomic PT-6 MKII showing key dimensions including height range (min 700mm - max 1100mm), shelf sizes (300x350mm and 350x400mm), and overall base dimensions (772mm x 572mm). It also indicates a 10kg/22lbs load capacity.
6. പരിപാലനം
To ensure the longevity and optimal performance of your Pronomic PT-6 MKII cart, follow these simple maintenance guidelines:
- വൃത്തിയാക്കൽ: Wipe down surfaces with a soft, damp തുണി. ഫിനിഷിന് കേടുവരുത്തുന്ന ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
- ഫാസ്റ്റനറുകൾ: Periodically check all screws, knobs, and fasteners to ensure they are tight. Re-tighten as necessary to maintain stability.
- കാസ്റ്ററുകൾ: Keep the casters free of dust, hair, and debris to ensure smooth movement. Lubricate if necessary.
- സംഭരണം: Store the cart in a dry, temperate environment when not in use.
7. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with your Pronomic PT-6 MKII cart.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Cart is wobbly/unstable. | Loose fasteners; uneven surface; overloaded. | Check and tighten all screws and knobs. Move cart to a flat, stable surface. Reduce load to within specifications. |
| കാസ്റ്ററുകൾ സുഗമമായി ഉരുളുന്നില്ല. | Debris in wheels; brakes engaged. | Clear any debris from casters. Ensure brakes are fully disengaged. |
| Shelf does not hold position after adjustment. | Adjustment knob not tightened sufficiently. | Ensure the adjustment knob is tightened firmly after setting the desired height or tilt. |
If you encounter issues not listed here, please contact Pronomic customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Pronomic PT-6 MKII Projector and Beamer Cart.
- മോഡൽ: PT-6 MKII (00037291)
- ബ്രാൻഡ്: പ്രോണോമിക്
- മെറ്റീരിയൽ: മെറ്റൽ, പ്ലാസ്റ്റിക്
- നിറം: വെള്ള
- Upper Shelf Dimensions: Approx. 30 x 35 cm (11.8 x 13.8 inches)
- Lower Shelf Dimensions: Approx. 35 x 40 cm (13.8 x 15.7 inches)
- Load Capacity per Shelf: 10 കി.ഗ്രാം (22 പൗണ്ട്)
- ക്രമീകരിക്കാവുന്ന ഉയരം: 70 സെ.മീ മുതൽ 110 സെ.മീ വരെ (27.5 മുതൽ 43.3 ഇഞ്ച് വരെ)
- Shelf Tilt Adjustment: +/- 35 ഡിഗ്രി
- Small Shelf Rotation: 360 ഡിഗ്രി
- കാസ്റ്ററുകൾ: 4 swivel casters (2 with brakes)
- Base Dimensions (assembled): Approx. 77.2 cm x 57.2 cm (30.4 x 22.5 inches)
- ഭാരം: 7.31 കി.ഗ്രാം (16.1 പൗണ്ട്)
9. വാറൻ്റിയും പിന്തുണയും
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Pronomic webസൈറ്റ്.
നിർമ്മാതാവ്: പ്രോണോമിക്
ആദ്യം ലഭ്യമായ തീയതി: 15 ജനുവരി 2020
