Hiland SGT-GLASS2 Quartz Glass Tube Replacement Instruction Manual

ആമുഖം

This manual provides instructions for the installation and care of your Hiland SGT-GLASS2 2-piece quartz glass tube replacement. This product is designed specifically for 4-sided tall pyramid-style and flame-style patio heaters. Please read these instructions carefully before proceeding with installation to ensure proper fit and safe operation.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hiland SGT-GLASS2 consists of two quartz glass tube pieces, each measuring 24.75 inches in length. When assembled, they form a total length of 49.5 inches with a 4-inch diameter. This replacement tube is compatible with most 4-sided pyramid-style patio heaters.

കുറിപ്പ്: This glass tube replacement is specifically for 4-sided heaters and will NOT fit 3-sided heater models. Please measure your existing tube to confirm compatibility.

Image: Two individual clear quartz glass tubes, each approximately 24.75 inches long, designed to be connected for a total length of 49.5 inches. They have a smooth, cylindrical shape with open ends.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

• Always ensure the patio heater is completely cool and disconnected from its fuel source before attempting any installation or maintenance.
• Wear appropriate safety gloves and eye protection when handling glass components.
• The stability connector ring and rubber ring are typically part of the original heater assembly and are ഉൾപ്പെടുത്തിയിട്ടില്ല with this replacement glass tube. Ensure these components are present and in good condition for proper installation.
• ഗ്ലാസ് ട്യൂബുകൾ പൊട്ടാതിരിക്കാൻ ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക.
• Refer to your patio heater's original instruction manual for specific disassembly and reassembly procedures.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these general steps to replace the glass tube in your 4-sided pyramid-style patio heater. Specific steps may vary slightly depending on your heater model.

1. Prepare the Heater: Ensure the patio heater is turned off, cooled down, and disconnected from the propane tank. Remove any top covers or grates as instructed by your heater's manual to access the glass tube compartment.
2. Remove Broken Glass (if applicable): Carefully remove any shattered or broken glass pieces. Use gloves and dispose of them safely.
3. Disassemble Top Section: Many pyramid heaters require removing the top section (usually secured by wing nuts or screws) to allow the glass tube to be inserted from the top.
4. Insert Lower Glass Tube: Gently lower the first (lower) glass tube piece into the heater's central column. Ensure it seats properly into the base, often with a rubber gasket (not included with this replacement tube).
5. Connect Upper Glass Tube: Place the stability connector ring (not included with this replacement tube) onto the top of the lower glass tube. Then, carefully lower the second (upper) glass tube piece onto the connector ring, ensuring a secure fit.
6. ഹീറ്റർ വീണ്ടും കൂട്ടിച്ചേർക്കുക: Reattach any removed top sections, grates, or protective cages. Secure all fasteners.
7. ശരിയായ ഇരിപ്പിടം പരിശോധിക്കുക: Visually inspect the entire glass tube assembly to ensure it is straight, securely seated, and free from any obstructions.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the replacement glass tube is securely installed, refer to your patio heater's original operating manual for instructions on how to safely connect the propane tank, ignite the burner, and adjust the flame. Ensure all safety precautions outlined in your heater's manual are followed.

മെയിൻ്റനൻസ്

• Regularly inspect the glass tube for any cracks, chips, or damage. Replace immediately if damage is found.
• Clean the glass tube periodically with a soft cloth and mild glass cleaner when the heater is completely cool. Avoid abrasive cleaners or materials that could scratch the glass.
• Store the patio heater in a protected area during harsh weather conditions or when not in use to prevent accidental damage to the glass tube.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues after replacing the glass tube, first ensure that the tube is correctly seated and all components are securely fastened. If the heater fails to ignite or operate correctly, consult your patio heater's original troubleshooting guide. Issues related to gas flow, ignition, or burner performance are typically addressed in the heater's main manual.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage or technical support, please refer to the documentation provided with your original Hiland patio heater or contact Hiland customer service directly. Keep your purchase receipt for warranty claims.