1. ആമുഖം
The Brandmotion FLTW-7690 Universal 4.3-inch Display Rear View Mirror is designed to enhance driving safety by providing a clear view of the area behind your vehicle when connected to an aftermarket backup camera. This mirror replaces your traditional rear view mirror and features an embedded 4.3-inch LCD color screen that automatically activates when the vehicle is in reverse. When not in reverse, the screen disappears, allowing the mirror to function as a standard rear view mirror. This manual provides essential information for proper installation, operation, and maintenance of your new display mirror.
2 സുരക്ഷാ വിവരങ്ങൾ
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ ശുപാർശ ചെയ്യുന്നു: For optimal performance and safety, professional installation is strongly recommended.
- Aftermarket Camera Required: This product is not a complete solution and requires an aftermarket backup camera (not included) for its display functionality.
- വാഹന അനുയോജ്യത: Designed for most vehicles utilizing a D-Tab Wedge mount. Some vehicles may require an adapter (e.g., Brandmotion 5000-TFAB). Verify fitment before final installation.
- Non-Dimming Mirror: This is a non-dimming display mirror.
- Not OnStar Compatible: This mirror is not compatible with OnStar systems.
- വയറിംഗ്: Ensure all wiring is correctly connected and secured to prevent interference or damage.
- ഊർജ്ജ സ്രോതസ്സ്: Operate within the specified 9-24V operating voltagഇ ശ്രേണി.
3. പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഇനങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- One (1) Brandmotion 4.3-inch Display Mirror (FLTW-7690)
- Wiring Harness with RCA Inputs and Trigger Wires
- Mounting Hardware (if applicable, typically for D-Tab Wedge mount)
Image: The Brandmotion FLTW-7690 display mirror shown with its included wiring harness and mounting accessories.
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Brandmotion FLTW-7690 mirror integrates a 4.3-inch LCD screen into a standard rear view mirror housing. Key features include:
- 4.3-inch Embedded LCD Screen: Provides a clear, full-color display (800x400 resolution, 420p) for backup camera feed.
- യാന്ത്രിക സജീവമാക്കൽ: Screen automatically turns on when the vehicle is shifted into reverse.
- Disappearing Display: Screen becomes invisible when not in use, functioning as a standard mirror.
- Two RCA Inputs: Allows connection of up to two video sources (e.g., front and rear cameras).
- ഓൺ/ഓഫ് ബട്ടൺ: For manual control of the display.
ചിത്രം: മുൻഭാഗം view of the Brandmotion FLTW-7690 mirror showing the 4.3-inch embedded display with a backup camera feed. Note the power button below the mirror surface.
ചിത്രം: പിൻഭാഗം view of the Brandmotion FLTW-7690 mirror, illustrating the mounting arm and the wiring exiting the unit.
5. ഇൻസ്റ്റലേഷൻ
കണക്കാക്കിയ ഇൻസ്റ്റാളേഷൻ സമയം: DIY: 60-90 minutes; Professional: 30-60 minutes.
5.1 പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ
- Ensure your vehicle uses a standard D-Tab Wedge mount. An adapter (Brandmotion 5000-TFAB) may be required for some vehicles.
- Confirm you have an aftermarket backup camera ready for connection.
- ഏതെങ്കിലും വൈദ്യുത ജോലി ആരംഭിക്കുന്നതിന് മുമ്പ് വാഹനത്തിന്റെ ബാറ്ററി വിച്ഛേദിക്കുക.
5.2 Mounting the Mirror
- Carefully remove your vehicle's existing rear view mirror from its D-Tab Wedge mount.
- Slide the Brandmotion FLTW-7690 mirror onto the existing D-Tab Wedge mount until it is securely seated.
- Tighten any set screws or locking mechanisms on the mirror mount to ensure stability.
5.3 വയറിംഗ് കണക്ഷനുകൾ
- പവർ കണക്ഷൻ: Connect the mirror's power wire (typically red) to a switched 12V power source in your vehicle. Connect the ground wire (typically black) to a suitable chassis ground point. Ensure the operating voltage is within 9-24V.
- Backup Camera Video Input: Connect the RCA video output cable from your aftermarket backup camera to one of the RCA input jacks on the mirror's wiring harness. The mirror has two RCA inputs.
- Reverse Trigger Wire: Connect the mirror's reverse trigger wire (often purple or green) to your vehicle's reverse light circuit. This wire signals the mirror to activate the display when the vehicle is in reverse.
- റൂട്ട് വയറിംഗ്: Carefully route all wiring behind trim panels and headliner to conceal it and prevent interference with vehicle operation. Secure wiring with zip ties or electrical tape as needed.
Image: A diagram illustrating the typical wiring connections for the Brandmotion display mirror, including power, ground, video input, and reverse trigger.
5.4 പോസ്റ്റ്-ഇൻസ്റ്റലേഷൻ പരിശോധന
- വാഹനത്തിന്റെ ബാറ്ററി വീണ്ടും ബന്ധിപ്പിക്കുക.
- Start the vehicle and shift into reverse. The 4.3-inch display should activate and show the backup camera feed.
- Shift out of reverse. The display should turn off and disappear.
- Test the On/Off button for manual display control.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- ഓട്ടോമാറ്റിക് ഡിസ്പ്ലേ സജീവമാക്കൽ: When the vehicle is shifted into reverse, the 4.3-inch LCD screen embedded in the mirror will automatically activate, displaying the video feed from the connected backup camera.
- Automatic Display Deactivation: When the vehicle is shifted out of reverse, the LCD screen will automatically turn off and become invisible, allowing the mirror to function as a standard rear view കണ്ണാടി.
- Manual Display Control: Use the On/Off button located on the bottom of the mirror housing to manually turn the display on or off, regardless of the vehicle's gear selection.
- Parking Gridlines: This mirror does not provide parking gridline overlays. If gridlines are desired, they must be supplied by your aftermarket backup camera.
Image: The Brandmotion FLTW-7690 mirror as seen from the driver's perspective, with the backup camera display active and showing parking assist lines (if provided by the camera).
7. പരിപാലനം
- കണ്ണാടി ഉപരിതലം വൃത്തിയാക്കൽ: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the mirror surface. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
- വീട് വൃത്തിയാക്കൽ: Wipe the mirror housing with a damp cloth. Avoid harsh chemicals or solvents.
- വയറിംഗ് പരിശോധന: എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
- ക്യാമറ മെയിന്റനൻസ്: Refer to your aftermarket backup camera's manual for its specific cleaning and maintenance instructions.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Display does not turn on in reverse. | No power to the mirror; reverse trigger wire not connected or faulty; faulty backup camera; loose video connection. | Check power and ground connections. Verify reverse trigger wire is correctly connected to the reverse light circuit. Ensure backup camera is powered and functioning. Check RCA video cable connection. |
| Display shows "No Signal" or a black screen. | Backup camera not powered; loose video connection; incorrect video input selected (if applicable). | Verify backup camera power. Check RCA video cable connection at both the camera and the mirror. Ensure the correct video input is active. |
| ചിത്രം വികലമായിരിക്കുന്നു അല്ലെങ്കിൽ മിന്നിമറയുന്നു. | Poor video connection; electrical interference; faulty camera or mirror. | Check all video connections for tightness. Ensure wiring is routed away from high-voltage cables. Test with a different video source if possible. |
| Mirror does not fit vehicle mount. | Incorrect mount type for vehicle. | An adapter (e.g., Brandmotion 5000-TFAB) may be required. Consult a professional installer or Brandmotion support. |
9 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: FLTW-7690
- സ്ക്രീൻ വലിപ്പം: 4.3 ഇഞ്ച്
- ഡിസ്പ്ലേ റെസല്യൂഷൻ: 800 x 400 (420p)
- വീക്ഷണ അനുപാതം: 4:3
- വീഡിയോ ഫോർമാറ്റ്: NTSC
- വീഡിയോ ഇൻപുട്ടുകൾ: 2 x RCA (with trigger wires)
- ഓപ്പറേറ്റിംഗ് വോളിയംtage: 9-24V
- മിറർ തരം: Non-dimming display mirror
- മൗണ്ട് തരം: Standard D-Tab Wedge Mount
- അളവുകൾ (ഉൽപ്പന്നം): 12 x 6 x 4 ഇഞ്ച് (ഏകദേശം)
- ഭാരം: 1.8 പൗണ്ട് (ഏകദേശം)
- UPC: 858216004790
10. വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation included with your purchase or visit the official Brandmotion website. For technical support or assistance with installation, please contact Brandmotion customer service directly.
Brandmotion Contact Information:
- Webസൈറ്റ്: www.brandmotion.com
- (Specific contact details like phone number or email may vary and are best found on the official webസൈറ്റ്.)
