ഉൽപ്പന്നം കഴിഞ്ഞുview
The Tackform Magnetic Phone Holder V2.0 is a versatile mounting solution designed to securely hold smartphones, tablets, and GPS units in various locations. It features strong N52 Neodymium magnets and authentic 3M adhesive for reliable attachment.
Image: The Tackform Magnetic Phone Holder V2.0, showcasing its compact design and magnetic surface.
പ്രധാന സവിശേഷതകൾ
- കാന്തിക മൗണ്ടിംഗ്: Attaches securely with high strength neodymium magnets.
- ബഹുമുഖ ഉപയോഗം: Can be used on car dash, kitchen counter, bedside table, bathroom mirror.
- പശ മൗണ്ടിംഗ്: Stick-on magnetic holder with authentic 3M adhesive for a no-slip grip.
- അനുയോജ്യമായ ഉപകരണങ്ങൾ: Fits most smartphones, tablets, GPS units and smartwatches.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made from flexible silicone material that is easy to clean.
Image: Diagram illustrating the versatile, safe, strong, smart, compatible, and secure features of the magnetic phone holder.
എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
Image: Contents of the Tackform Magnetic Phone Holder package, including the mount, metal disks, re-install adhesives, alcohol pad, and dry wipe.
- 1 - Magnetic Dash Mount
- 2 - Metal Disks
- 1 - Round Disk
- 2 - Re-install Adhesives
- 1 - Alcohol Pad
- 1 - Dry Wipe
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Step 1: Choose a Mounting Location
Select a flat, clean surface for mounting the holder. Common locations include car dashboards, kitchen counters, or bedside tables. Ensure the surface is free from dust, grease, and moisture.
ഘട്ടം 2: ഉപരിതലം തയ്യാറാക്കുക
Use the included alcohol pad to thoroughly clean the chosen mounting surface. Allow it to dry completely.
Step 3: Attach the Magnetic Dash Mount
Remove the protective film from the 3M adhesive on the base of the magnetic dash mount. Carefully position the mount on the prepared surface. Press firmly for at least 30 seconds to ensure strong adhesion. For optimal bonding, allow the adhesive to cure for 24 hours before attaching your device.
Video: This video demonstrates the installation process of the Tackform Magnetic Phone Holder on a car dashboard, showing how to apply the adhesive mount.
ഘട്ടം 4: നിങ്ങളുടെ ഉപകരണം തയ്യാറാക്കുക
Choose one of the provided metal disks. You can either stick it directly to the back of your phone or phone case, or place it between your phone and its case (if the case is not too thick). If sticking the disk, ensure the surface is clean and dry before applying.
Image: A smartphone securely attached to the magnetic mount in a car, highlighting quick and easy setup and full access to device ports.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
നിങ്ങളുടെ ഉപകരണം അറ്റാച്ചുചെയ്യുന്നു
Once the magnetic dash mount is securely installed and the metal disk is attached to your device, simply bring your device close to the magnetic surface of the mount. The strong N52 magnets will automatically align and hold your device in place.
ക്രമീകരിക്കുന്നു Viewing ആംഗിൾ
The mount features a ball joint for 360-degree rotation, allowing you to adjust your device to the perfect viewing angle. Loosen the collar on the ball joint, adjust the angle, and then tighten the collar to secure it.
Image: Illustration of the 360-degree rotation and adjustable viewing angles provided by the magnetic phone holder's ball joint.
മെയിൻ്റനൻസ്
To clean the magnetic mount, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or adhesive. Ensure the magnetic surface and the metal disk on your device are kept clean for optimal magnetic connection.
ട്രബിൾഷൂട്ടിംഗ്
Issue: Mount is not sticking securely.
- പരിഹാരം: Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application. Press firmly for the recommended time and allow 24 hours for the adhesive to cure without a device attached. Extreme temperatures can affect adhesive performance; apply in moderate conditions.
Issue: Device is not holding firmly to the magnet.
- പരിഹാരം: Verify that the metal disk is correctly positioned on your device or inside your case. If using a phone case, ensure it is not excessively thick, as this can weaken the magnetic connection. Ensure both the mount's magnetic surface and the metal disk are clean.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 0.75 x 1.2 x 1.2 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 1.6 ഔൺസ് |
| നിർമ്മാതാവ് | ടാക്ഫോം |
| ഇനം മോഡൽ നമ്പർ | TF00-0N0M |
| ബ്രാൻഡ് | ടാക്ഫോം |
| നിറം | കറുപ്പ് |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Smartphones, Tablets, GPS Units |
| മൗണ്ടിംഗ് തരം | Adhesive (3M) |
Image: Detailed dimensions of the Tackform Magnetic Phone Holder, showing its compact design.
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please contact Tackform customer service directly. Refer to the product packaging or the official Tackform webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.
