1. ഉൽപ്പന്നം കഴിഞ്ഞുview
1.1 ഉൽപ്പന്ന വിവരണം
The Makita 520076-6 Field Assembly is an original equipment manufacturer (OEM) authorized replacement part. This component is designed to fit various Makita power tool models, ensuring compatibility and proper function. It is manufactured in the United States.
1.2 പ്രധാന സവിശേഷതകൾ
- Genuine OEM authorized part.
- Designed for compatibility with various Makita models.
- Direct replacement for part number 520076-6.
- Ensures proper function and performance of the power tool.
ചിത്രം 1: Image of the Makita 520076-6 Field Assembly. This component is a critical internal part of certain Makita power tools, typically involved in the motor's electrical system.
2. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
Installation of the Makita 520076-6 Field Assembly requires technical knowledge and should only be performed by qualified personnel or individuals experienced in power tool repair. Incorrect installation can lead to tool malfunction, damage, or personal injury.
2.1 സുരക്ഷാ മുൻകരുതലുകൾ
- പവർ വിച്ഛേദിക്കുക: Always ensure the power tool is unplugged from its power source or its battery pack is removed before beginning any disassembly or installation.
- സംരക്ഷണ ഗിയർ ധരിക്കുക: സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ എന്നിവ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ഉപയോഗിക്കുക.
- Refer to Tool Manual: Consult the specific service manual for your Makita power tool model for detailed disassembly and reassembly procedures.
- Work in a Clean Area: Perform work in a well-lit, clean, and organized environment to prevent loss of small parts.
2.2 പൊതുവായ ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- വേർപെടുത്തുക: Carefully disassemble the power tool according to its service manual to access the existing field assembly.
- പഴയ ഭാഗം നീക്കം ചെയ്യുക: Disconnect any wires or fasteners securing the old field assembly and remove it. Note the orientation and connections for proper reassembly.
- പുതിയ ഭാഗം ഇൻസ്റ്റാൾ ചെയ്യുക: Position the new Makita 520076-6 Field Assembly in its correct location. Ensure all connections are secure and properly seated.
- പുനഃസംയോജനം: Reassemble the power tool, ensuring all screws, covers, and components are correctly installed and tightened.
- ടെസ്റ്റ്: Before full operation, perform a brief test of the tool to ensure the new part functions correctly and there are no unusual noises or behaviors.
3. ഓപ്പറേഷൻ
The Makita 520076-6 Field Assembly is an internal component of a power tool. It does not have independent operational controls. Its function is integrated into the overall operation of the power tool it is installed within. Refer to the instruction manual of your specific Makita power tool for operational guidelines.
4. പരിപാലനം
As an internal component, the field assembly typically requires minimal direct user maintenance. However, proper care of the power tool it is installed in will contribute to its longevity.
- പതിവ് വൃത്തിയാക്കൽ: Keep the exterior of your power tool clean and free from dust and debris.
- പരിശോധന: Periodically inspect the tool for any signs of wear or damage. If the tool exhibits reduced performance or unusual sounds, professional inspection may be required.
- സംഭരണം: Store the power tool in a dry, clean environment, away from extreme temperatures and moisture.
5. പ്രശ്നപരിഹാരം
If your power tool is not functioning correctly after replacing the field assembly, consider the following:
- തെറ്റായ ഇൻസ്റ്റലേഷൻ: Double-check all connections and ensure the field assembly is correctly seated and secured according to the tool's service manual.
- Damaged Wires: Inspect all wires and connections for any signs of pinching, fraying, or improper contact.
- Other Component Failure: The issue might stem from another component within the power tool, not necessarily the newly installed field assembly.
- പ്രൊഫഷണൽ സഹായം: If troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a qualified power tool technician or authorized Makita service center.
6. ഉൽപ്പന്ന സവിശേഷതകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| നിർമ്മാതാവ് | മകിത |
| ഭാഗം നമ്പർ | 520076-6 |
| ഇനം മോഡൽ നമ്പർ | 520076-6 |
| ഇനത്തിൻ്റെ ഭാരം | 1.01 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 1 x 1 x 1 ഇഞ്ച് |
| ഇനത്തിൻ്റെ പാക്കേജ് അളവ് | 1 |
| ബാറ്ററികൾ ആവശ്യമുണ്ടോ? | ഇല്ല |
| ASIN | B010BX3TBW |
| ആദ്യ തീയതി ലഭ്യമാണ് | ജൂൺ 18, 2015 |
7. വാറൻ്റിയും പിന്തുണയും
This Makita 520076-6 Field Assembly is covered by Makita's standard warranty for genuine replacement parts. For specific warranty terms and conditions, please refer to the official Makita website or contact Makita customer support directly. For technical assistance or service, please contact an authorized Makita service center.
മകിത ഒഫീഷ്യൽ Webസൈറ്റ്: www.makitatools.com
