ആമുഖം
The Optimate TM-500 is a 6-step DC to DC battery saving charger and maintainer designed for 12V lead-acid and 12.8V-13.2V LFP (LiFePO4) batteries. This device allows you to charge and maintain a secondary battery using a primary 12V battery as a power source, eliminating the need for AC power. It is ideal for recharging batteries in vehicles like motorcycles, ATVs, or boats while in transit or in remote locations.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always follow safety guidelines when handling batteries and electrical equipment.
- Ensure proper ventilation when charging lead-acid batteries.
- Avoid short-circuiting the battery terminals or charger connections.
- ചാർജർ മഴയിലോ അമിതമായ ഈർപ്പത്തിലോ തുറന്നുകാട്ടരുത്.
- Always connect the charger's output to the target battery before connecting the charger's input to the source battery.
- Disconnect the source battery connection before disconnecting the charger from the target battery.
- The charger is designed for 12V lead-acid and 12.8V-13.2V LFP batteries only. Do not use with other battery types.
പാക്കേജ് ഉള്ളടക്കം
- Optimate TM-500 Battery Charger
- Battery Lead (with eyelets)
- Battery Clips (alligator clamps)
പ്രധാന സവിശേഷതകൾ
- Off-Grid Charging: Charges 12V lead-acid (AGM, GEL, STD) and 12.8V-13.2V LFP (LiFePO4) batteries from another 12V battery source.
- Lithium Friendly: Safe for use with Lithium (LiFePO4) batteries.
- ബാറ്ററി ലാഭിക്കൽ: Capable of recovering deeply discharged, sulfated 12V batteries from as low as 2 Volts.
- പൂർണ്ണമായും യാന്ത്രിക പ്രവർത്തനം: Connect and forget functionality with continuous charging for healthy batteries and fault detection.
- Intelligent BMS Wake-up Mode: Safely reactivates batteries with integrated Battery Management Systems (BMS) from sleep mode.
- സുരക്ഷിത പ്രവർത്തനം: Features spark suppression, protection against overcharging, short-circuit, and incorrect battery connection.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps to set up your Optimate TM-500 charger:
- Identify the source 12V battery (e.g., vehicle battery, external 12V battery) and the target battery to be charged.
- Ensure both batteries are in a well-ventilated area.
- Connect the charger's output cables (with clips or eyelets) to the terminals of the target battery. Ensure correct polarity (red to positive, black to negative).
- Connect the charger's input cables to the terminals of the source 12V battery. Ensure correct polarity.
- The charger will automatically begin its diagnostic and charging process.
Operating the Optimate TM-500 (6-Step Program)
The Optimate TM-500 employs a sophisticated 6-step charging program to optimize battery health and performance:
- Step 1: Low Volt Start (2V BMS Reset) - Initiates charging for deeply discharged batteries, including those with BMS protection.
- Step 2: Pulse SAVE - Recovers sulfated batteries with high-voltage pulses.
- Step 3: Controlled CHARGE - Delivers a controlled current to bring the battery to full charge.
- Step 4: OPTIMIZE - Balances cell voltage and ensures optimal charge for maximum battery life.
- Step 5: TEST after CHARGE - Performs a battery health test to identify potential issues.
- Step 6: OptiMATE 365 Maintenance - Enters a long-term maintenance mode, delivering charge only when needed to prevent overcharging and prolong battery life. This mode also protects the source battery by drawing minimal power.
The charger's LEDs will indicate the current charging stagഇ, ബാറ്ററി നില.
മെയിൻ്റനൻസ് മാർഗ്ഗനിർദ്ദേശങ്ങൾ
The Optimate TM-500 is designed for long-term battery maintenance. Once the 6-step program is complete, it automatically enters the OptiMATE 365 maintenance mode. In this mode, the charger will monitor the battery and deliver small charges as necessary to keep it at optimal voltage without overcharging. This prolongs battery life and ensures readiness.
Periodically check the connections for cleanliness and security. Keep the charger clean and dry.
ട്രബിൾഷൂട്ടിംഗ്
- Charger not activating: Ensure both the target battery and source battery connections are secure and have correct polarity. Check the source battery for sufficient voltage (10V-ന് മുകളിൽ).
- No status lights: Verify the source battery is connected and providing power. Check for any blown fuses in the connection cables (if applicable).
- ബാറ്ററി ചാർജ്ജുചെയ്യുന്നില്ല: The target battery might be severely damaged or have an internal fault. The charger may indicate a fault or not proceed past the 'SAVE' step. Consider having the battery professionally tested.
- Source battery draining too quickly: While the OptiMATE maintenance mode is efficient, ensure your source battery has adequate capacity for the duration of charging and maintenance. For prolonged maintenance, a larger capacity source battery is recommended.
- യാന്ത്രിക അടച്ചുപൂട്ടൽ: The charger will automatically shut down if a short-circuit is detected or if the battery is disconnected during operation. Recheck connections and restart the process.
സാങ്കേതിക സവിശേഷതകൾ
| നിർമ്മാതാവ് | OptiMate |
| മോഡൽ | TM-500 |
| ഇൻപുട്ട് വോളിയംtage | 12-16V DC (from source battery) |
| Putട്ട്പുട്ട് വോളിയംtage | 12V / 12.8V-13.2V (for target battery) |
| ഔട്ട്പുട്ട് കറൻ്റ് | 2A |
| ബാറ്ററി തരങ്ങൾ പിന്തുണയ്ക്കുന്നു | 12V Lead-Acid (AGM, GEL, STD), 12.8V-13.2V LFP (LiFePO4) |
| ഇനത്തിൻ്റെ ഭാരം | 1.32 പൗണ്ട് (600 ഗ്രാം) |
| ഉൽപ്പന്ന അളവുകൾ | 6.57 x 1.81 x 2.56 ഇഞ്ച് |
| സുരക്ഷാ സവിശേഷതകൾ | No risk of overcharging, spark suppressed, automatic shut-down for short-circuit/disconnection. |
| സർട്ടിഫിക്കേഷനുകൾ | സിഇ, എഫ്സിസി, റോഎച്ച്എസ്, യുഎൽ |
വാറൻ്റിയും പിന്തുണയും
The Optimate TM-500 comes with a 3-year limited replacement warranty. For technical support, warranty claims, or further assistance, please contact Optimate customer service or refer to the official Optimate webസൈറ്റ്.
കൂടുതൽ വിവരങ്ങൾക്ക്, നിങ്ങൾക്ക് ഔദ്യോഗിക ഉപയോക്തൃ ഗൈഡ് PDF പരിശോധിക്കാവുന്നതാണ്: Optimate TM-500 User Guide (PDF)
