Utilitech PPWB Plastic Submersible Utility Pump

1. ആമുഖം

Thank you for choosing the Utilitech PPWB Plastic Submersible Utility Pump. This battery-operated pump is designed for efficient water transfer from various locations such as boats, kayaks, pool covers, and aquariums. Its compact and portable design makes it ideal for on-the-go use.

Please read this manual thoroughly before operating the pump to ensure safe and effective use.

2 സുരക്ഷാ വിവരങ്ങൾ

തീ, വൈദ്യുതാഘാതം അല്ലെങ്കിൽ വ്യക്തികൾക്ക് പരിക്കേൽക്കാനുള്ള സാധ്യത കുറയ്ക്കുന്നതിന് ഈ ഉൽപ്പന്നം ഉപയോഗിക്കുമ്പോൾ എല്ലായ്പ്പോഴും അടിസ്ഥാന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക.

• ചെയ്യരുത് operate the pump with damaged cords or plugs.
• ചെയ്യരുത് pump flammable or explosive liquids such as gasoline, fuel oil, kerosene, etc.
• ചെയ്യരുത് use in areas where flammable vapors are present.
• Ensure the battery compartment is securely closed and dry before submerging the pump.
• ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് കൈകളും അയഞ്ഞ വസ്ത്രങ്ങളും സൂക്ഷിക്കുക.
• This pump is designed for water only. Do not use for other liquids.
• Always remove batteries when the pump is not in use for extended periods.

3. പാക്കേജ് ഉള്ളടക്കം

• Utilitech PPWB Plastic Submersible Utility Pump
• 36-inch Garden Hose Adapter
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4. സജ്ജീകരണം

4.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The pump requires three (3) D-size alkaline batteries (sold separately).

1. Locate the top cover of the pump.
2. Push down gently on the top cover and twist counter-clockwise to unlock and remove it.
3. Carefully remove the battery pack from the center of the pump.
4. Insert three D-size alkaline batteries into the battery pack, ensuring correct polarity (+/-).
5. Place the loaded battery pack back into the pump's center compartment.
6. Align the top cover with the pump body, push down, and twist clockwise to secure it. Ensure it is tightly sealed to prevent water ingress.

4.2 Hose Attachment

The pump includes a 36-inch garden hose adapter for extended reach.

1. Uncoil the clear hose that wraps around the pump unit.
2. Attach the garden hose adapter to the threaded outlet on the pump.
3. Connect the other end of the hose to the desired drainage point or container.

Image: The Utilitech PPWB pump with its clear hose and garden hose adapter. The pump is white plastic with a handle on top and a perforated base.

5. ഓപ്പറേഷൻ

To operate the Utilitech PPWB pump:

1. Ensure batteries are correctly installed and the top cover is sealed.
2. Place the pump into the water you wish to drain. The pump is designed to float when the suction screen is removed, allowing for versatile placement.
3. Locate the on/off switch (typically a black button or lever on the side) and activate it to start the pump.
4. The pump will begin to transfer water at a rate of up to 3 gallons per minute (GPM) with a 36-inch lift.
5. Once the desired amount of water has been transferred or the area is drained, deactivate the on/off switch to stop the pump.
6. Remove the pump from the water and allow it to drain.

6. പരിപാലനം

Regular maintenance will prolong the life of your pump.

• വൃത്തിയാക്കൽ: After each use, rinse the pump thoroughly with clean water to remove any debris or residue. Ensure the suction screen is clear.
• സംഭരണം: Store the pump in a dry, cool place when not in use. Remove batteries if storing for an extended period to prevent leakage.
• ബാറ്ററി കെയർ: Replace batteries when the pump's performance diminishes. Do not mix old and new batteries or different types of batteries.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Utilitech webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.