ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your new Delta Essa Chrome Kitchen Faucet. Please read all instructions carefully before beginning installation to ensure proper function and to prevent injury or damage.
സുരക്ഷാ വിവരങ്ങൾ
- Always turn off the main water supply before beginning any work on the faucet.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് സുരക്ഷാ ഗ്ലാസുകൾ ധരിക്കുക.
- ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്ലംബറെ സമീപിക്കുക.
- Ensure all connections are tight to prevent leaks, but do not overtighten.
- ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

Image: Delta Essa Chrome Kitchen Faucet as packaged, showing main components.
- Delta Essa Kitchen Faucet Assembly
- Optional Deck Plate
- Mounting Hardware (washer, mounting nut, screws)
- Supply Lines (integrated)
- സ്പ്രേയർ ഹോസ്
- Sprayer Weight
- ഫോം ഗാസ്കറ്റ്
- Blue Clip
സ്പെസിഫിക്കേഷനുകൾ

Image: Diagram illustrating the dimensions of the Delta Essa faucet and installation hole requirements.
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഡെൽറ്റ |
| മോഡലിൻ്റെ പേര് | എസ്സ® |
| മോഡൽ നമ്പർ | 9113-ഡിഎസ്ടി |
| ഫിനിഷ് തരം | Chrome |
| മെറ്റീരിയൽ | ലോഹം |
| ഹാൻഡിലുകളുടെ എണ്ണം | 1 |
| മൗണ്ടിംഗ് തരം | ഡെക്ക് മ .ണ്ട് |
| ദ്വാരങ്ങളുടെ എണ്ണം | 1 (or 3-hole with included deck plate) |
| പ്രത്യേക ഫീച്ചർ | സ്പ്രേയർ താഴേക്ക് വലിക്കുക |
| പരമാവധി ഒഴുക്ക് നിരക്ക് | മിനിറ്റിന് 1.8 ഗാലൻ |
| സ്പ out ട്ട് ഉയരം | 15.75 ഇഞ്ച് |
| സ്പൗട്ട് റീച്ച് | 9.25 ഇഞ്ച് |
| ഹോസ് നീളം | 60 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 6.56 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 9.38"D x 11"W x 15.75"H |
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps for a successful installation. Refer to the provided videos for visual guidance.
ആവശ്യമായ ഉപകരണങ്ങൾ
- ഫിലിപ്സ് സ്ക്രൂഡ്രൈവർ
- ക്രമീകരിക്കാവുന്ന റെഞ്ച്
- സുരക്ഷാ ഗ്ലാസുകൾ
- ഫ്ലാഷ്ലൈറ്റ്
- ടവൽ
- Pot or Bucket
- Silicone sealant (optional, for uneven surfaces)
പ്രീ-ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- നിങ്ങളുടെ അടുക്കള സിങ്കിലേക്കുള്ള പ്രധാന ജലവിതരണം ഓഫ് ചെയ്യുക.
- Clear the area under the sink and place a towel and bucket to catch any residual water.
- Remove your old faucet (if applicable).
ഫ്യൂസറ്റ് മൌണ്ട് ചെയ്യുന്നു
- Prepare the foam gasket: Separate the outer ring from the inner part. Peel off the backing to expose the sticky side.
- Feed the supply lines through the foam gasket, sticky side up. Seat the gasket flush on the bottom of the faucet.
- Feed the supply lines and sprayer hose down through the mounting hole in your sink. Position the faucet on the sink surface, ensuring the Delta logo is centered.
- From underneath the sink, slide the washer and mounting nut onto the sprayer hose and supply lines, pushing them up to the bottom of the faucet shank. Hand-tighten the mounting nut, ensuring hoses are not pinched.
- Use a Phillips screwdriver to tighten the mounting screws on the mounting nut. Tighten one screw, then the other, then re-check the first screw for tightness.
- If your sink surface is uneven, apply silicone sealant to the gasket before mounting for a watertight seal.
Video: Detailed installation guide for a single handle faucet, covering mounting and connections.
Video: Demonstrates how to mount the Delta faucet, including securing it to the sink.
Video: Important tip on avoiding a common installation error regarding handle placement.
Connecting Supply Lines
- Identify the hot (red) and cold (blue) supply lines from the faucet. Connect the blue line to the cold water supply valve (typically on the right) and the red line to the hot water supply valve (typically on the left). Hand-tighten the nuts.
- Use an adjustable wrench to give each nut one additional 360-degree revolution to ensure a secure connection. Do not overtighten.
- Manage excess tubing by looping it, ensuring the loop is at least 8 inches across to prevent kinks. Alternatively, use a spiral pattern.
Flushing Supply Lines
- Ensure the faucet handle is in the OFF position.
- Slowly turn on both the hot and cold water supply valves underneath the sink.
- Position a bucket under the sprayer hose outlet tube (the small tube where water will exit).
- Move the faucet handle to the full mix position and allow water to flush for approximately 30 seconds to clear any debris.
- എല്ലാ കണക്ഷനുകളിലും ചോർച്ചയുണ്ടോയെന്ന് പരിശോധിക്കുക. ചോർച്ചയുള്ള കണക്ഷനുകൾ മുറുക്കുക.
Connecting Sprayer Hose & Weight
- Ensure the sprayer hose is free and clear of other supply lines to allow for smooth movement.
- Feed the sprayer hose through the sprayer weight.
- Push the end of the sprayer hose onto the outlet tube until it clicks into place. Secure it with the blue clip.
- Give the hose a gentle tug to ensure the connection is secure.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Image: The Delta Essa faucet in action, with the pull-down sprayer being used to rinse vegetables in a kitchen sink.
ജലപ്രവാഹവും താപനില നിയന്ത്രണവും
The single handle controls both water flow and temperature. Move the handle left for hot water, right for cold water, and up/down to adjust flow.
Pull-Down Sprayer
The Essa faucet features a pull-down sprayer for extended reach. Simply pull the spray wand from the spout. MagnaTite® Docking uses a powerful integrated magnet to ensure the spray wand snaps securely into place when not in use.

Image: Close-up of the Delta Essa faucet demonstrating the MagnaTite® Docking system, where the spray wand is magnetically secured.
സ്പ്രേ മോഡുകൾ
Toggle between stream and spray modes using the button on the spray wand.

ചിത്രം: രണ്ട് views of the Delta Essa faucet, one showing water in spray mode and the other in stream mode.
Video: Product demonstration highlighting the features and spray modes of the Delta Essa faucet.
മെയിൻ്റനൻസ്
Cleaning the Faucet Finish
ക്രോം ഫിനിഷ് മൃദുവായ, ഡി ക്ലീനർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകൾ, കഠിനമായ രാസവസ്തുക്കൾ, അല്ലെങ്കിൽ സ്കോറിംഗ് പാഡുകൾ എന്നിവ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
ടച്ച്-ക്ലീൻ® സ്പ്രേ ഹോളുകൾ
The Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger, maintaining optimal spray performance.

Image: Close-up of the spray head showing the flexible rubber Touch-Clean® spray holes, designed for easy cleaning of mineral buildup.
ട്രബിൾഷൂട്ടിംഗ്
ദുർബലമായ നീരൊഴുക്ക്
- Check for kinks in the supply lines or sprayer hose.
- Clean the aerator: Mineral deposits can restrict water flow. Gently unscrew the aerator from the spray head and rinse away any debris. Reinstall securely.
കണക്ഷനുകളിലെ ചോർച്ചകൾ
- Ensure all supply line connections are hand-tightened, then given one additional wrench turn.
- Check the mounting nut underneath the sink for tightness.
- Verify the foam gasket is properly seated and, if necessary, apply silicone sealant for a better seal.
Sprayer Wand Does Not Dock Properly
- Ensure the sprayer weight is correctly installed on the hose underneath the sink, allowing for proper retraction.
- Check for any obstructions preventing the MagnaTite® magnet from engaging.
വാറൻ്റി വിവരങ്ങൾ

Image: Icon representing the Lifetime Limited Warranty.
Delta faucets are backed by a Lifetime Limited Warranty, ensuring leak-free operation and finish durability for the life of the product. Refer to the official Delta Faucet webപൂർണ്ണ വാറന്റി വിശദാംശങ്ങൾക്കായി സൈറ്റ്.
ഉപഭോക്തൃ പിന്തുണ

Image: A Delta Faucet customer service representative smiling, indicating support availability.
For further assistance or questions, please contact Delta Faucet Company customer service at 1-800-345-ഡെൽറ്റ (3358) അല്ലെങ്കിൽ അവരുടെ ഉദ്യോഗസ്ഥനെ സന്ദർശിക്കുക webസൈറ്റ്.





