ആമുഖം
This instruction manual provides essential information for the safe and effective use, assembly, and maintenance of your Husky 52-inch 9-Drawer Mobile Work Bench (Model 75809AHR). Please read this manual thoroughly before initial use and retain it for future reference.
Figure 1: Husky 52-inch 9-Drawer Mobile Work Bench (Model 75809AHR)
സുരക്ഷാ വിവരങ്ങൾ
ഇത് വീണ്ടും ശുപാർശ ചെയ്യുന്നുview the weight limit specified for each drawer and not exceed these limits to prevent damage or injury. Always ensure the cabinet is on a stable, level surface when in use. When moving the cabinet, use caution and ensure the casters are locked when not in use to prevent unwanted movement. Always follow local safety regulations and guidelines when assembling and using this product.
ഉൽപ്പന്ന സവിശേഷതകൾ
- 52-inch width (55 inches with push handle) for ample വർക്ക്സ്പെയ്സ്.
- Solid wood top with a protective, stain-resistant coating.
- Nine drawers for organized storage.
- Full extension ball-bearing drawer slides: 75 lbs rated for the top drawer, 50 lbs rated for other drawers.
- Keyed internal locking system to secure tools.
- Heavy-duty 5-inch x 2-inch casters (2 swivel with brake, 2 rigid) supporting up to 1000 lbs.
- Large ergonomic tubular side handle for easy mobility.
- Heavy-duty all-welded steel construction with a tough powder coat paint finish.
സജ്ജീകരണവും അസംബ്ലിയും
The Husky 52-inch 9-Drawer Mobile Work Bench requires minimal assembly. The main cabinet body is pre-assembled. You will need to attach the casters and the side handle.
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the work bench from its packaging. Retain all packaging materials until assembly is complete and you are satisfied with the product.
- കാസ്റ്ററുകൾ ഘടിപ്പിക്കുന്നു:
- Lay the work bench on its back on a protective surface to avoid scratching the finish.
- Attach the two swivel casters (with brakes) to the front corners of the work bench.
- Attach the two rigid casters to the rear corners of the work bench.
- Secure all casters using the provided hardware. Ensure all bolts are tightened securely.
- Attaching Side Handle:
- Locate the pre-drilled holes on one side of the work bench.
- Align the side handle with these holes and secure it using the provided hardware. Ensure all bolts are tightened securely.
- Upright Positioning: With assistance, carefully return the work bench to its upright position.
- Caster Lock: Engage the brakes on the swivel casters to prevent unintended movement.
Figure 2: Work Bench Dimensions
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ഡ്രോയർ ഓപ്പറേഷൻ
The work bench features nine drawers equipped with full-extension ball-bearing slides for smooth operation. The top drawer has a 75 lbs weight capacity, while the other eight drawers each have a 50 lbs weight capacity. Distribute weight evenly within drawers to maintain optimal performance and prevent tipping.
Figure 3: Open Drawers with Ball-Bearing Slides
ലോക്കിംഗ് മെക്കാനിസം
The work bench includes a keyed internal locking system to secure all drawers simultaneously. Insert the key into the lock on the top drawer and turn to engage or disengage the locking mechanism.
മൊബിലിറ്റി
The heavy-duty casters allow for easy movement of the work bench. To move the unit, unlock the swivel casters. Use the tubular side handle to guide the work bench. Once in the desired location, engage the brakes on the swivel casters to stabilize the unit.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Wipe down the steel surfaces with a damp cloth and mild detergent as needed. Avoid abrasive cleaners that could damage the powder coat finish.
- Wood Top Care: The solid wood top has a protective coating. Clean spills promptly. For stubborn marks, use a wood-safe cleaner. Avoid placing hot items directly on the surface without protection.
- ഡ്രോയർ സ്ലൈഡുകൾ: Periodically inspect the ball-bearing drawer slides for debris. If drawers become stiff, apply a small amount of silicone lubricant to the slides.
- കാസ്റ്ററുകൾ: Check casters regularly for accumulated debris or wear. Clean as necessary to ensure smooth rolling.
- ഹാർഡ്വെയർ: Periodically check all bolts and fasteners for tightness and re-tighten if necessary.
ട്രബിൾഷൂട്ടിംഗ്
- Drawers are stiff or difficult to open/close:
- Check for excessive weight in the drawer, ensuring it does not exceed the specified capacity.
- Inspect the drawer slides for obstructions or debris. Clean if necessary.
- Apply a silicone-based lubricant to the ball-bearing slides.
- Work bench is unstable or wobbles:
- Ensure the work bench is placed on a level surface.
- Verify that the brakes on the swivel casters are fully engaged.
- Check all caster and handle attachment bolts for tightness and re-tighten if loose.
- Locking mechanism is not working:
- Ensure all drawers are fully closed before attempting to lock the unit.
- Check for any obstructions preventing the internal locking bars from engaging.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഹസ്കി |
| മോഡൽ നമ്പർ | 75809AHR |
| ഉൽപ്പന്ന അളവുകൾ (W x D x H) | 52.4 in. x 18.1 in. x 37.1 in. (55.4 in. W with handle) |
| ഡ്രോയറുകളുടെ എണ്ണം | 9 |
| Top Drawer Capacity | 75 പൗണ്ട് |
| Other Drawer Capacity | 50 പൗണ്ട് വീതം |
| മൊത്തത്തിലുള്ള ഭാരം ശേഷി | 1000 പൗണ്ട് |
| കാസ്റ്റർ വലുപ്പം | 5 ഇഞ്ച് x 2 ഇഞ്ച്. |
| മെറ്റീരിയൽ | All-welded steel construction, solid wood top |
| പൂർത്തിയാക്കുക | പൊടി കോട്ട് |
| ഇനത്തിൻ്റെ ഭാരം | 181.1 പൗണ്ട് |
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the documentation included with your purchase or contact Husky customer service directly. Keep your purchase receipt for warranty claims.
