Ohaus ST10C-A Pen Meter Instruction Manual

1. ആമുഖം

The Ohaus ST10C-A Pen Meter is designed for simple, fast, and accurate measurement. This economical device offers reliable performance for various applications. Its durable construction and user-friendly features make it suitable for consistent use in diverse environments.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The ST10C-A Pen Meter is a compact, handheld device. Key features include a clear digital display, an intuitive on/off button, a protective sensor cap, and a wrist strap for secure handling.

ചിത്രം 1: Ohaus ST10C-A Pen Meter. This image shows the Ohaus ST10C-A Pen Meter. It features a digital display for pH readings, an 'On/Off' button, and a durable, waterproof design with red accents.

The meter's IP67 waterproof ABS housing ensures protection against dust and water ingress, making it suitable for wet conditions. An automatic shutdown feature helps conserve battery life.

3. സജ്ജീകരണം

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the meter and all accessories from the packaging. Inspect for any damage.
2. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: The meter typically comes with batteries pre-installed or requires simple installation. Refer to the battery compartment cover for instructions on opening and inserting batteries, ensuring correct polarity.
3. സെൻസർ തയ്യാറാക്കൽ: Remove the protective sensor cap. If the sensor appears dry, condition it according to standard pH electrode practices (e.g., soaking in storage solution or pH 7 buffer for a short period).
4. പ്രാരംഭ കാലിബ്രേഷൻ: For optimal accuracy, perform an initial calibration using fresh pH buffer solutions (e.g., pH 4.01, 7.00, and 10.01). Follow the calibration procedure outlined in the meter's specific quick start guide or on-screen prompts.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്: അമർത്തുക ഓൺ/ഓഫ് button located on the front of the meter to turn the device on or off.
2. ഒരു അളവ് എടുക്കൽ:
   • Ensure the sensor cap is removed.
   • Rinse the sensor with distilled water before and after each measurement.
   • s-ലേക്ക് സെൻസർ മുക്കുകample solution, ensuring the sensor tip is fully submerged.
   • ഏകതാനത ഉറപ്പാക്കാനും വായന സ്ഥിരപ്പെടുത്താനും ലായനി സൌമ്യമായി ഇളക്കുക.
   • Read the pH value displayed on the screen once it becomes stable.
3. യാന്ത്രിക ഷട്ട്ഡൗൺ: The meter is equipped with an automatic shutdown feature to conserve battery life. It will power off after a period of inactivity.

5. പരിപാലനം

• സെൻസർ വൃത്തിയാക്കൽ: After each use, rinse the sensor thoroughly with distilled or deionized water. Do not wipe the sensor bulb, as this can cause static charges and damage the sensitive glass.
• സംഭരണം: Always replace the protective sensor cap after use. Ensure the cap contains a small amount of storage solution (or pH 7 buffer) to keep the sensor hydrated. Never store the sensor dry or in distilled water.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the battery indicator appears on the display, replace the batteries promptly. Refer to the battery compartment for the correct battery type and installation procedure.
• പൊതുവായ ശുചീകരണം: The meter's housing can be cleaned with a damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.

6. പ്രശ്‌നപരിഹാരം

7 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: ST10C-A
• ബ്രാൻഡ്: ഒഹാസ്
• ഭവനം: IP67 waterproof ABS
• ഫീച്ചറുകൾ: Protective sensor cap, automatic shutdown, wrist strap
• അളവുകൾ: Approximately 15 x 10 x 4 inches (Product dimensions as listed, note this might be packaging size)
• ഭാരം: Approximately 2 Pounds (Product weight as listed, might be shipping weight)

Note: Specific measurement ranges, accuracy, and resolution details should be confirmed with the official Ohaus product data sheet.

8. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, technical support, or service inquiries, please refer to the official Ohaus website or contact your local Ohaus representative. Keep your purchase receipt for warranty claims.

Official Ohaus Webസൈറ്റ്: www.ohaus.com