3M Worktunes Connect Am/Fm + Bluetooth

3M WorkTunes Connect+ AM/FM with Bluetooth Technology User Manual

Model: Worktunes Connect Am/Fm + Bluetooth

ആമുഖം

The 3M WorkTunes Connect+ AM/FM with Bluetooth Technology hearing protector is designed to provide hearing protection while allowing you to stream audio and make calls. This manual provides essential information for the proper use, care, and maintenance of your device.

It features a Noise Reduction Rating (NRR) of 24 dB, Bluetooth wireless technology for seamless streaming, an integrated microphone for calls, excellent AM/FM radio performance, and Audio Assist Technology for operational guidance.

ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുക.

സുരക്ഷാ വിവരങ്ങൾ

This hearing protection product helps reduce exposure to hazardous noise and other loud sounds. Misuse or failure to wear hearing protectors at all times that you are exposed to noise may result in hearing loss or injury.

For proper use, refer to the user instructions. 3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in hearing protector fit, fitting skill, and motivation of the user. If the NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations.

ഉൽപ്പന്നം കഴിഞ്ഞുview

3M WorkTunes Connect+ AM/FM with Bluetooth Technology

Figure 1: 3M WorkTunes Connect+ AM/FM with Bluetooth Technology hearing protector.

3M WorkTunes Connect+ AM/FM with Bluetooth Technology with labels

Figure 2: Key features of the 3M WorkTunes Connect+ AM/FM with Bluetooth Technology, including vented headband, auto shut-off, soft ear cushions, high-fidelity audio, easy-to-use controls, and AM/FM radio programming.

പ്രധാന സവിശേഷതകൾ:

സജ്ജമാക്കുക

ബാറ്ററി ഇൻസ്റ്റാളേഷൻ:

The 3M WorkTunes Connect+ uses two AA batteries. The battery compartment is located on the side of the earcups. To install or replace batteries:

  1. Locate the battery compartment cover on the earcup.
  2. കവർ തുറക്കുക.
  3. ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് രണ്ട് പുതിയ AA ബാറ്ററികൾ ഇടുക.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Note: The device is designed to use AA batteries for quick replacement, ensuring continuous operation without waiting for charging.

പ്രാരംഭ ജോടിയാക്കൽ (ബ്ലൂടൂത്ത്):

  1. Ensure your 3M WorkTunes Connect+ is powered on.
  2. നിങ്ങളുടെ മൊബൈൽ ഉപകരണത്തിൽ ബ്ലൂടൂത്ത് സജീവമാക്കുക.
  3. On the 3M WorkTunes, press and hold the Bluetooth button (often labeled with a Bluetooth symbol or integrated with the power button) until the indicator light flashes, indicating pairing mode.
  4. On your mobile device, search for available Bluetooth devices and select "3M WorkTunes Connect+" from the list.
  5. Once connected, the indicator light on the headset will typically turn solid blue or change to a slow flash. Audio Assist Technology will confirm the connection.

Tip: For optimal Bluetooth range, keep your connected device within close proximity to the headset.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ഓൺ/ഓഫ്:

Switching Audio Sources (AM/FM/Bluetooth):

Use the "Source" button to cycle through available audio sources: AM Radio, FM Radio, and Bluetooth.

Person using 3M WorkTunes Connect+ while working

Figure 3: User wearing 3M WorkTunes Connect+ while operating machinery, demonstrating the practical application of the hearing protector.

3M WorkTunes Connect+ with Bluetooth Technology

Figure 4: Close-up of the 3M WorkTunes Connect+ highlighting the Bluetooth technology feature for streaming music and making calls.

AM/FM റേഡിയോ പ്രവർത്തനം:

Person using 3M WorkTunes Connect+ while mowing

Figure 5: User wearing 3M WorkTunes Connect+ while operating a lawnmower, demonstrating the effectiveness of noise reduction and the ability to listen to AM/FM radio.

വോളിയം നിയന്ത്രണം:

Adjust the volume using the dedicated volume knob, typically located on the side of the earcup. For Bluetooth audio, you may also need to adjust the volume on your connected mobile device.

കോളുകൾ ചെയ്യലും സ്വീകരിക്കലും:

When connected via Bluetooth, the integrated microphone allows for hands-free communication.

3M WorkTunes Connect+ with integrated microphone

Figure 6: The 3M WorkTunes Connect+ showing the integrated microphone, enabling users to make and receive phone calls without removing the headset.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ:

സംഭരണം:

ചെവി കുഷ്യൻ മാറ്റിസ്ഥാപിക്കൽ:

Over time, ear cushions may wear out. Replacement cushions are available from 3M or authorized retailers to maintain optimal comfort and hearing protection performance.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഒരു പവറും/ഉപകരണവും ഓണാകില്ല.ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററികൾ.ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കിക്കൊണ്ട് പുതിയ AA ബാറ്ററികൾ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക.
ബ്ലൂടൂത്ത് വഴി ബന്ധിപ്പിക്കാൻ കഴിയില്ല.Headset not in pairing mode; device too far; interference.Ensure headset is in pairing mode. Move closer to the device. Turn off other Bluetooth devices nearby.
മോശം റേഡിയോ സ്വീകരണം.Weak signal; antenna position.Adjust the antenna for better reception. Move to an area with stronger signal.
ഓഡിയോ നിലവാരം മോശമാണ്.Low battery; poor connection; damaged speaker.Replace batteries. Re-pair Bluetooth. Contact 3M support if speakers are damaged.
കോളുകൾക്കിടയിൽ മൈക്രോഫോൺ പ്രവർത്തിക്കുന്നില്ല.Bluetooth connection issue; microphone obstruction.Ensure stable Bluetooth connection. Check for any obstructions around the microphone.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official 3M website or contact 3M Technical Service toll-free at 1-800-494-3552. In Canada, call 1-800-267-4414.

Additional resources, including user guides, may be available on the 3M product support pages.

Note: This product is subject to Proposition 65 warnings.