1. ആമുഖം
The ThermoPro TP-12 is a digital wireless thermometer designed to accurately monitor the internal temperature of your meat and the temperature of your oven or BBQ. With a remote range of up to 300 feet, this unit allows you to monitor your cooking from a distance, eliminating the need for constant supervision. It features dual probes, a timer, and various alarm functions to ensure your food is cooked perfectly every time.
This manual provides detailed instructions on how to set up, operate, and maintain your ThermoPro TP12 thermometer. Please read it thoroughly before first use.
2 സുരക്ഷാ വിവരങ്ങൾ
- മുന്നറിയിപ്പ്: Do not touch the stainless steel probes or wires with bare hands during or immediately after cooking, as they will be extremely hot. Always wear heat-resistant gloves.
- Keep the receiver and transmitter away from direct heat sources, open flames, or hot surfaces.
- Do not immerse the receiver or transmitter in water or place them in a dishwasher. They are not waterproof.
- The probes and wires are designed to withstand temperatures up to 716°F (380°C). Do not expose them to temperatures exceeding this limit.
- Ensure the probe cable is not pinched or damaged by oven doors or grill grates.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 1 x റിസീവർ യൂണിറ്റ്
- 1 x ട്രാൻസ്മിറ്റർ യൂണിറ്റ്
- 1 x Food Grade Stainless Steel Probe (6.5 inches)
- 1 x Oven/BBQ Stainless Steel Probe (3 inches)
- 4 x AAA ബാറ്ററികൾ

Image: The ThermoPro TP12 package contents, showing the receiver and transmitter units, two stainless steel probes (one for food, one for oven/BBQ), and a metal clip for the oven probe.
4. ഉൽപ്പന്ന ഘടകങ്ങളും സവിശേഷതകളും

Image: The ThermoPro TP12 wireless thermometer system, displaying the receiver unit on the left with its large red display, the transmitter unit on the right, and the two stainless steel probes connected to the transmitter.
റിസീവർ യൂണിറ്റ്
- ഡിസ്പ്ലേ: Large LCD display showing food and BBQ/oven temperatures, timer, and alarm indicators.
- ബട്ടണുകൾ:
- HI/HR: Adjusts high temperature setting for BBQ/oven, or sets hours for timer.
- LO/MIN: Adjusts low temperature setting for BBQ/oven, or sets minutes for timer.
- മോഡ്/ലൈറ്റ്: Switches between temperature setting mode and timer mode; activates backlight.
- സമന്വയം: Synchronizes receiver with transmitter.
- ആരംഭിക്കുക/നിർത്തുക: Starts or stops the timer.
- HI/CL: Adjusts high temperature setting for food.
- °F/°C: Toggles between Fahrenheit and Celsius.
- അലാറം: Flashes and beeps when programmed temperature is reached or connection is lost.
ട്രാൻസ്മിറ്റർ യൂണിറ്റ്
- ഡിസ്പ്ലേ: Small LCD display showing current probe temperatures.
- Probe Jacks: Two ports for connecting the food and oven/BBQ probes.
- പവർ ബട്ടൺ: ഓൺ/ഓഫ് സ്വിച്ച്.
- വയർ സ്റ്റാൻഡ്: Integrated wire stand for tabletop use or hanging on an oven door.
പേടകങ്ങൾ
- ഫുഡ് പ്രോബ്: 6.5-inch food grade stainless steel probe with a step-down tip for accurate and fast temperature readings.
- Oven/BBQ Probe: 3-inch stainless steel probe for monitoring ambient temperatures.
- കേബിൾ: 40-inch stainless steel mesh cable, designed to withstand high temperatures.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the 6.5-inch food grade stainless steel probe, highlighting its step-down tip design for improved accuracy and speed in temperature measurement.
5. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
- ബാറ്ററികൾ ചേർക്കുക:
- Open the battery compartment on the back of both the receiver and transmitter units.
- ഓരോ യൂണിറ്റിലും 2 AAA ബാറ്ററികൾ തിരുകുക, ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കുക.
- ബാറ്ററി കമ്പാർട്ടുമെൻ്റുകൾ സുരക്ഷിതമായി അടയ്ക്കുക.

Image: The ThermoPro TP12 receiver and transmitter units, illustrating the battery compartment location and icons representing the receiver's flash and beep alarm, dual temperature monitoring, and the inclusion of 4 AAA batteries.
- കണക്ട് പ്രോബുകൾ:
- Plug the food probe into the "FOOD" jack on the transmitter.
- Plug the oven/BBQ probe into the "BBQ" jack on the transmitter.
- പവർ ഓൺ:
- Slide the ON/OFF switch on the back of the transmitter to the "ON" position.
- The transmitter's display will show the current temperatures from the probes.
- The receiver will automatically synchronize with the transmitter. If not, press and hold the "SYNC" button on the receiver for 3 seconds.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
6.1 താപനില അലാറങ്ങൾ സജ്ജമാക്കൽ
- അന്വേഷണം തിരഞ്ഞെടുക്കുക: Press the "MODE/LIGHT" button on the receiver to cycle through "FOOD" temperature setting, "BBQ" high temperature setting, and "BBQ" low temperature setting.
- താപനില ക്രമീകരിക്കുക:
- For "FOOD" temperature, press "HI/CL" to increase the target temperature.
- For "BBQ" high temperature, press "HI/HR" to increase the target temperature.
- For "BBQ" low temperature, press "LO/MIN" to increase the target temperature.
- The temperature will cycle back to the minimum after reaching the maximum.
- ക്രമീകരണം സ്ഥിരീകരിക്കുക: The setting will automatically save after a few seconds of inactivity, or you can press "MODE/LIGHT" again to move to the next setting.
- When the probe temperature reaches the set alarm temperature, the receiver will flash and beep. Press any button to stop the alarm.

Image: The ThermoPro TP12 system in use, showing the receiver displaying both meat and oven temperatures, with the transmitter placed near an oven, demonstrating its ability to monitor two temperatures concurrently.
6.2 ടൈമർ ഉപയോഗിക്കുന്നു
- ടൈമർ മോഡ് നൽകുക: Press the "MODE/LIGHT" button repeatedly until "TIMER" is displayed on the receiver.
- Set Countdown Timer:
- Press "HI/HR" to set hours.
- Press "LO/MIN" to set minutes.
- Press "START/STOP" to begin the countdown.
- To pause, press "START/STOP" again. To reset, press and hold "START/STOP" for 3 seconds.
- കൗണ്ട് അപ്പ് ടൈമർ: If the timer is set to 00:00 and "START/STOP" is pressed, the timer will begin counting up.

Image: The ThermoPro TP12 receiver unit demonstrating its countdown and count-up timer capabilities, showing how the display changes to indicate hours and minutes for timing cooking processes.
6.3 താപനില സ്വിച്ചിംഗ് യൂണിറ്റുകൾ (°F/°C)
Press the "°F/°C" button on the receiver to toggle between Fahrenheit and Celsius temperature displays.
6.4 Remote Range and Signal Loss
The ThermoPro TP12 offers a remote range of up to 300 feet in open areas. Factors such as walls, obstacles, and electromagnetic interference can reduce this range.
If the receiver loses connection with the transmitter, it will alert you with an alarm. Move the receiver closer to the transmitter to re-establish the connection.

Image: The ThermoPro TP12 in an outdoor grilling scenario, illustrating its 300-foot remote range capability, with the user holding the receiver unit while the transmitter is near the grill.
7. പരിപാലനവും പരിചരണവും
- ക്ലീനിംഗ് പ്രോബ്സ്: Wash the stainless steel probes with hot soapy water after each use. Rinse thoroughly and dry completely. Do not immerse the probe connectors or wires in water.
- Cleaning Units: റിസീവർ, ട്രാൻസ്മിറ്റർ യൂണിറ്റുകൾ പരസ്യം ഉപയോഗിച്ച് തുടയ്ക്കുകamp cloth. Do not use abrasive cleaners or immerse them in water.
- സംഭരണം: Store the thermometer in a dry place at room temperature when not in use. Remove batteries if storing for extended periods to prevent leakage.
- പ്രോബ് കെയർ: Avoid bending or kinking the probe cables excessively, as this can damage the internal wiring.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No display on receiver/transmitter. | ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ചേർത്ത ബാറ്ററികൾ. | ബാറ്ററികൾ പുതിയ AAA ബാറ്ററികൾ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക. |
| Receiver not syncing with transmitter. | Out of range; interference; transmitter off. | Move receiver closer to transmitter. Ensure transmitter is on. Press and hold SYNC button on receiver. |
| കൃത്യമല്ലാത്ത താപനില റീഡിംഗുകൾ. | Probe not fully inserted; damaged probe/cable. | Ensure probe is fully inserted into the food/oven. Check probe cable for visible damage. Contact customer support for probe replacement if damaged. |
| അലാറം മുഴങ്ങുന്നില്ല. | Volume too low; alarm disabled; battery low. | Check receiver settings. Replace batteries. |
| "---" or "LLL" on display. | Probe not connected or damaged; temperature out of range. | Ensure probe is securely connected. If connected, probe may be damaged or temperature is below 32°F (0°C). |
| "HHH" on display. | പരിധിക്ക് പുറത്തുള്ള താപനില. | Temperature is above 572°F (300°C). Remove probe from extreme heat. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| താപനില പരിധി | 32°F മുതൽ 572°F വരെ (0°C മുതൽ 300°C വരെ) |
| താപനില കൃത്യത | 1.8 മുതൽ 1 ° F (32 മുതൽ 212 ° C) വരെ 0 100 ° F (± XNUMX ° C) |
| Food Probe Length | 6.5 inches (food grade stainless steel) |
| Oven/BBQ Probe Length | 3 inches (stainless steel) |
| കേബിൾ നീളം | 40 inches (stainless steel mesh) |
| വിദൂര ശ്രേണി | 300 അടി വരെ (കാഴ്ചയുടെ രേഖ) |
| Receiver Display Size | 1.5 x 1.3 ഇഞ്ച് (38 x 34 മിമി) |
| Transmitter Display Size | 1.0 x 0.5 ഇഞ്ച് (26 x 13.5 മിമി) |
| Probe & Wire Heat Resistance | 716°F (380°C) വരെ |
| സർട്ടിഫിക്കേഷനുകൾ | FCC certified, CE certified, ROHS, FDA approved probe |
| പവർ ഉറവിടം | 4 x AAA batteries (2 for receiver, 2 for transmitter) |
10. വാറൻ്റിയും പിന്തുണയും
ThermoPro provides a 1-year warranty for this product from the date of purchase. By registering your product after purchase, you can receive an extended 3-year warranty.
Additionally, ThermoPro offers a lifetime warranty on their sensor probes. If your probe experiences temperature reading problems, a brand-new replacement probe will be provided free of charge.
For warranty claims, technical support, or any questions regarding your ThermoPro TP12 thermometer, please contact ThermoPro Customer Service:
- ഫോൺ: 877-515-7797
- Webസൈറ്റ്: Refer to the official ThermoPro webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.
Please have your model number (TP12) and purchase information ready when contacting support.





