ആമുഖം
This manual provides essential instructions for the safe and proper use, maintenance, and care of your Zippo Pocket Watch Chrome Polished Lighter, Model 2004742. This lighter features a distinctive pocket watch and number wheels emblem design. It is a windproof lighter designed for reliable performance.
പ്രധാന സവിശേഷതകൾ:
- Authentic Zippo "click" sound upon opening.
- Windproof design for consistent flame in various conditions.
- ഈടുനിൽക്കുന്ന ലോഹ നിർമ്മാണം.
- Packaged in a gift box.
സജ്ജമാക്കുക
1. Fueling Your Zippo Lighter
Your Zippo lighter is shipped without fuel for safety. Use only genuine Zippo lighter fluid for optimal performance.
- Open the lighter and remove the inner unit (insert) from the case.
- Lift the felt pad on the bottom of the insert to expose the packing material.
- Slowly saturate the packing material with Zippo lighter fluid until the cotton is wet. Do not overfill.
- Replace the felt pad and insert the unit back into the case.
- Wipe any excess fluid from the lighter and your hands before igniting.
2. Flint Check
Ensure the flint is properly seated and provides a strong spark. If not, refer to the Maintenance section for flint replacement.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- ലിഡ് തുറക്കുക: Flip open the lid of the lighter. You will hear the distinctive Zippo "click."
- Ignite the Flame: Hold the lighter firmly and spin the flint wheel downwards with your thumb to create a spark. The spark will ignite the fuel-soaked wick.
- Maintain Flame: Keep the lid open to maintain the flame.
- Extinguish Flame: Close the lid to extinguish the flame. Do not blow out the flame.
Image: The Zippo lighter open, showing the internal mechanism and the detailed pocket watch design on the case.
മെയിൻ്റനൻസ്
1. ഇന്ധനം നിറയ്ക്കൽ
Refuel your Zippo lighter as described in the "Setup" section when the flame becomes weak or fails to ignite. Frequency depends on usage.
2. Replacing the Flint
If the flint wheel spins but no spark is produced, the flint needs replacement.
- Remove the inner unit from the case.
- Unscrew the flint spring at the bottom of the insert. Be careful, as the spring is under tension.
- Remove the old flint and insert a new Zippo flint into the tube.
- Replace the flint spring and tighten it securely. Do not overtighten.
- Insert the unit back into the case.
3. Trimming the Wick
If the flame becomes inconsistent or difficult to light, the wick may need trimming.
- Using tweezers or pliers, gently pull the wick up until a clean, unburned section is exposed.
- Trim the wick even with the top of the chimney using scissors.
- Reshape the wick to ensure it is centered and straight.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Lighter won't light. | ഇന്ധനമില്ല. | Refuel the lighter with Zippo lighter fluid. |
| Lighter won't light. | Worn flint. | Replace the flint. |
| Weak or inconsistent flame. | Wick needs trimming or adjusting. | Trim or adjust the wick as described in the Maintenance section. |
| Lighter leaks fuel. | Overfilled with fuel or damaged felt pad. | Do not overfill. Ensure felt pad is properly seated. If damage persists, contact Zippo support. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: സിപ്പോ
- മോഡൽ നമ്പർ: 2004742
- നിറം: Chrome
- മെറ്റീരിയൽ: പിച്ചള
- ശൈലി: സമചതുരം
- ഇനത്തിൻ്റെ ഭാരം: 50 ഗ്രാം (1.76 ഔൺസ്)
- ഇന്ധന തരം: Gasoline (Zippo Lighter Fluid recommended)
- ഉൽപ്പന്ന അളവുകൾ: 2.28"L x 1.5"W x 0.79"Th
- ഉപയോഗത്തിനുള്ള പ്രത്യേക നിർദ്ദേശങ്ങൾ: Ideal in wind and weather
Image: The Zippo lighter shown in hand, illustrating its compact size (approximately 2.3 inches / 5 cm in height).
വാറൻ്റിയും പിന്തുണയും
All Zippo lighters are backed by Zippo's famous lifetime guarantee: "It works or we fix it free.™" For service or repair, please visit the official Zippo website or contact Zippo customer service directly. Do not attempt to repair the lighter yourself beyond basic maintenance as this may void the warranty.
കൂടുതൽ വിവരങ്ങൾക്ക്, സന്ദർശിക്കുക Zippo Store on Amazon.
