ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Westbrass ASB-50 Sink Top Waste Disposal Air Switch and Single Outlet Control Box. This air switch system is designed to provide a safe and convenient method for operating your garbage disposal unit by eliminating the risk of electrical shock associated with traditional wall switches.
ശരിയായ പ്രവർത്തനവും സുരക്ഷയും ഉറപ്പാക്കാൻ ഇൻസ്റ്റാളേഷനും പ്രവർത്തനത്തിനും മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുക.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിൽ കാൻസർ, ജനന വൈകല്യങ്ങൾ അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന തകരാറുകൾ എന്നിവയ്ക്ക് കാരണമാകുന്ന രാസവസ്തുക്കൾ കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയാം. കൂടുതൽ വിവരങ്ങൾക്ക്, എന്നതിലേക്ക് പോകുക www.P65Warnings.ca.gov.
- Always disconnect power to the disposal unit before performing any installation or maintenance.
- Ensure all electrical connections are made according to local codes and regulations. If unsure, consult a qualified electrician.
- The air switch system is designed to prevent electrical shock by using air pressure to activate the disposal, isolating the electrical components from the user.
- Do not attempt to modify the product. Use only genuine Westbrass replacement parts if needed.
ഘടകങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്
Your Westbrass ASB-50 Air Switch system includes the following components:
- Flush Button (Powder Coat White)
- Air Switch Control Box (Single 120V Outlet)
- 6-foot Air Hose
- Mounting Hardware (e.g., nuts, washers)

ചിത്രം 1: ഓവർview of the Westbrass ASB-50 Air Switch components, including the flush button, control box, and air hose.

ചിത്രം 2: വിശദമായി view of the flush button, highlighting its brass cover, solid brass push button, and sleek design.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is key to the safe and effective operation of your air switch. Follow these steps carefully.
- മൗണ്ടിംഗ് സ്ഥലം തയ്യാറാക്കുക: The flush button requires a 1-1/4 inch to 1-3/8 inch hole for mounting. This can be on a countertop, sink, or wall. Ensure the location is within six feet of a dedicated 120V, 15 amp electrical outlet for the control box.
- Mount the Flush Button: Insert the flush button assembly into the prepared hole. Secure it from underneath with the provided mounting nut and seal washer. The button's body length is approximately 3 inches, fitting decks up to 1-1/4 inches thick.
- എയർ ഹോസ് ബന്ധിപ്പിക്കുക: Attach one end of the 6-foot air hose to the air tube port on the underside of the flush button. Ensure a snug fit.
- പൊസിഷൻ കൺട്രോൾ ബോക്സ്: Place the control box in a dry, accessible location, ideally under the sink, close to the dedicated 120V outlet.
- Connect Air Hose to Control Box: Attach the other end of the air hose to the air inlet on the control box.
- Connect Disposal to Control Box: Plug your garbage disposal's power cord into the single 120V outlet on the control box.
- Plug Control Box into Wall Outlet: Finally, plug the control box's power cord into the dedicated 120V, 15 amp മതിൽ ഔട്ട്ലെറ്റ്.

Figure 3: Installation diagram showing the connection points for the flush button, air hose, control box, and disposal unit.

Figure 4: Technical drawing with dimensions for the ASB-50 air switch components, useful for pre-installation planning.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Operating your Westbrass ASB-50 Air Switch is simple and intuitive.
- To Start the Disposal: Press the flush button firmly. This sends a pulse of air through the hose to the control box, which then activates the garbage disposal.
- To Stop the Disposal: Press the flush button firmly again. A second pulse of air will signal the control box to turn off the garbage disposal.
The air switch mechanism ensures that there is no electrical connection between the button you touch and the electrical current powering the disposal, providing enhanced safety.

Figure 5: User interaction with the air switch button to activate the disposal.
മെയിൻ്റനൻസ്
The Westbrass ASB-50 Air Switch is designed for durability and requires minimal maintenance. Regular cleaning and occasional checks will help ensure its longevity.
- വൃത്തിയാക്കൽ: Clean the flush button with a soft, damp തുണിയും വീര്യം കുറഞ്ഞ സോപ്പും ഉപയോഗിക്കുക. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ കഠിനമായ രാസവസ്തുക്കളോ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
- Air Hose Check: Periodically inspect the air hose for any kinks, cracks, or disconnections. Ensure it remains securely attached to both the button and the control box.
- ബട്ടൺ പ്രവർത്തനം: If the button feels stiff or unresponsive, ensure no debris is lodged around it. The button is tested for 25,000 pushes, indicating long-term reliability.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Westbrass ASB-50 Air Switch, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Disposal does not turn on when button is pressed. |
|
|
| Disposal does not turn off. |
|
|
| Button feels stiff or requires excessive force. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | എഎസ്ബി-50 |
| നിർമ്മാതാവ് | വെസ്റ്റ്ബ്രാസ് |
| ഇനത്തിൻ്റെ ഭാരം | 11.2 ഔൺസ് |
| ഉൽപ്പന്ന അളവുകൾ | 7.25 x 8.25 x 3.5 inches (overall package) |
| Flush Button Fit | Fits 1-1/4 in. to 1-3/8 in. holes; 1-3/4 in. length switch body fits 1-1/4 in. thick decks |
| Control Box Outlet | Single (1) 120V outlet, no-shock design |
| എയർ ഹോസ് നീളം | 6 feet (approx. 6.13 feet) |
| മെറ്റീരിയൽ | Brass; Plastic; Steel |
| നിറം | Powder Coat White (for this specific model) |
| മാതൃരാജ്യം | തായ്വാൻ |

Figure 6: Detailed product dimensions for the control box and flush button.
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support regarding your Westbrass ASB-50 Air Switch, please contact Westbrass directly. Details can typically be found on the manufacturer's official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ് പരാമർശിച്ചുകൊണ്ട്.
You can also visit the official Westbrass Store for more information and contact options: ആമസോണിലെ വെസ്റ്റ്ബ്രാസ് സ്റ്റോർ.





